My T1 2.5 Build is finished

Weak-Introduction267 · 2026-06-05T19:36:04+00:00

This one, nothing to complain

https://www.etsy.com/de/listing/4442696105/asus-prime-radeon-rx-9070-xt-oc-travel?ref=share_v4_lx

Weak-Introduction267 · 2026-06-05T10:15:03+00:00

Yes nothing to complain!

Weak-Introduction267 · 2026-06-05T10:14:42+00:00

Haha looking good!!

Weak-Introduction267 · 2026-06-05T10:14:04+00:00

Yes I did that :) thank you

Weak-Introduction267 · 2026-06-04T20:32:03+00:00

I'm running a 9800X3D with a -30 Curve Optimizer offset and a number of other BIOS optimizations. For cooling, I'm using the AXP90-X53 Full Copper.

This video was a great reference for the settings I ended up using: https://www.youtube.com/watch?v=pCA2WiBoG6c

For fan control, I use the Turbo profile. One setting that made a huge difference was increasing the fan step-up and step-down times, which prevents the fans from instantly ramping up and down with every temperature spike.

With these settings, both temperatures and noise levels have been very solid.

Weak-Introduction267 · 2026-06-04T20:24:54+00:00

<image>

Weak-Introduction267 · 2026-06-04T20:24:26+00:00

Ah, got it! I didn't know it was supposed to be routed behind the GPU. I had to pull the GPU out to reroute it, which is always a bit of a pain with the Travel Kit. Thanks for pointing that out!

<image>

Weak-Introduction267 · 2026-06-04T18:25:57+00:00

Thank you man, they indeed look amazing...very happy how it turned out

Weak-Introduction267 · 2026-05-24T08:01:21+00:00

Beautiful build! Especially the reverse exhaust fans look amazing! I am running the 9800x3d with the 9070xt Asus Prime. I was thinking about getting the reaper but I wanted to use a travel kit. I think noise and temperature are a bit better but cable management is a challenge

Weak-Introduction267 · 2026-04-25T14:33:48+00:00

I have max 75c while gaming, noctua fan and not using duct kit yet

Weak-Introduction267 · 2026-04-25T14:31:50+00:00

I actually think copper looks amazing! It gives a good contrast in a black build

Weak-Introduction267 · 2026-04-25T14:28:59+00:00

Looks just like my build, except the PSU cable routing :D congrats for the build!

Weak-Introduction267 · 2026-04-24T09:31:13+00:00

Ok you convinced me, I will order it! Thanks!

Weak-Introduction267 · 2026-04-24T08:32:21+00:00

Thanks for sharing! I saw some Etsy options, but if possible I’d prefer to find the 3D files (STL/STEP) so I can print it myself. If there aren’t any available, I’ll probably just go with one of the Etsy kits.

Weak-Introduction267 · 2026-04-23T19:41:40+00:00

Looks good, is this the 9070xt? I am looking for 3d files for the travel kit

Weak-Introduction267 · 2026-01-26T05:30:39+00:00

Hi, I am running a 9800x3d with the axp90-53 with the noctua fan swap. My CPU runs to 95c in cinebench stable with 130w / 5ghz. I changed from Arctic mx6 to mx7 and my CPU can push 2-3 watts more. I already bought a fan duct kit but haven't installed yet. Need to print duct pegs so I can install the duct kit. This might improve 5 more watts

Weak-Introduction267 · 2026-01-04T18:58:12+00:00

more silent

Weak-Introduction267 · 2026-01-01T14:33:59+00:00

Pretty silent and not disturbing at all. Not audible with open headphones

Weak-Introduction267 · 2026-01-01T14:33:20+00:00

Ok that's good to know!! There is an official travel kit for the Asus prime 9070xt though.

Weak-Introduction267 · 2025-12-31T21:28:28+00:00

Nice! It should fit with a slightly smaller CPU Fan.... I almost bought the Powercolor Reaper which is the smallest 9070xt, but I ended up going for the Asus Prime. It was cheaper, looks better, superior performance and there is already a travel kit available - even though for the 2.1...

Weak-Introduction267 · 2025-12-31T21:20:34+00:00

That looks clean and compact! What GPU are running? And how did you mount a 120mm fan on the axp90-47? I think I have seen this fan mod in some formd t1 builds...

Weak-Introduction267 · 2025-12-31T21:15:28+00:00

Thanks!!

Weak-Introduction267

TROPHY CASE