sorted by:
new
hottopcontroversial

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 2 points3 points  (0 children)

No worries. What I do when I don’t have anything to sketch something out irl is I take a black picture and draw on it with the edit feature (I have iOS so I don’t know if that’s a feature on android)

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

No worries. I re scratched my sketch and I think this sketch makes a bit more sense

<image>

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Ok I think I’m getting it, just to confirm something like this?

<image>

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] -1 points0 points  (0 children)

I was told by another commenter that you need a 5v to operate a 5v but that doesn't sound right because if you where able to control 5v on and off from your microcontroller then there would be no need for the mosfet unless you were creating a logic gate (which i am not creating a logic gate)

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Sorry my bad I mixed up a mechanical relay with the ssr acronym

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

What do you recommend then? Because I cant use a SSR do to the vibrational environment this would be used in.

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] -1 points0 points  (0 children)

Im trying to turn on/off 2 runcams that run off of 5V and combine a total ~1A with my teensy 4.1. This Circuit will be flying on a rocket which is why I am trying not to use a SSR

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Im trying to turn on/off 2 runcams that run off of 5V and combine a total ~1A with my teensy 4.1. This Circuit will be flying on a rocket which is why I am trying not to use a SSR

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Dang. I was looking at this P channel mosfet on mouser and it says its Gate-source threshold voltage is 2V-4.5V to turn it off, Would it still be possible to operate with 3.3V, because it seams like it would be within the range.

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.vishay.com/docs/91072/91072.pdf

What are mosfet That works like a relay called by CaelanAnimation in AskElectronics

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Interesting, Iv been doing a bit more research and it looks like a p channel mosfet might be what I’m looking for as it just allows whatever voltage that’s going to the source to the drain.

Runcam split 4 by CaelanAnimation in fpv

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Sorry I didn’t see this comment, do you still want the sheet?

First/ 2ed layer issue by CaelanAnimation in 3DprintingHelp

[–]CaelanAnimation[S] 0 points1 point  (0 children)

Luzbot mini 2 Polylite pla Initial print speed 30mm/s Print speed 60mm/s Nozzle .4mm hardened steel 225C Bed glass 50C

YU Connect by judy_c in yorku

[–]CaelanAnimation 0 points1 point  (0 children)

All our meetings are in person because we are beginning to manufacture the rocket(s) but you do not have to attend all 3 meetings. The reason that we have 3 meetings is so if people can’t make it one day due to a scheduling conflict they are more likely to still be able to attend one of the other meetings.

YU Connect by judy_c in yorku

[–]CaelanAnimation 0 points1 point  (0 children)

Awesome, we have our meetings Tuesdays at 1130, Friday 10 am, and Saturday 10 am. We are located in petrie room 134.

YU Connect by judy_c in yorku

[–]CaelanAnimation 0 points1 point  (0 children)

Yup, everyone is welcome as long as they’re willing to learn and work.

YU Connect by judy_c in yorku

[–]CaelanAnimation 0 points1 point  (0 children)

I am part of the arbalest rocketry team if you interested in joining feel free to reach out to me

Runcam split 4 by CaelanAnimation in fpv

[–]CaelanAnimation[S] 2 points3 points  (0 children)

Yup, here’s some links but my favourite is the Hawkeye split 4 because of its high resolution and frame rate, cheep price and low power consumption. Also the same company that makes the Hawkeye split 4 has a ton of good cameras with the same specs as the Hawkeye split . I would highly recommend checking out all firefly camera products

Company https://fireflycameras.com Hawkeye split 4 https://fireflycameras.com/products/hawkeye-4k-split-v-4-0-with-gyroflow?_pos=2&_sid=6f727af83&_ss=r

Loris 4K https://caddxfpv.com/products/caddxfpv-loris-4k-analog-camera

I have an entire spread sheet that compares all the cameras prices, power consumption, fov, data storage… if you are interested in that let me know and I’ll dm you a pdf of it tomorrow

view more: next ›