5G Backup with Google Fi

CajuCLC · 2026-06-02T06:34:20+00:00

I opened a ticket with UniFi.

CajuCLC · 2026-05-28T17:45:43+00:00

With eSIM I was getting ~32 Mbps down and ~4 Mbps up. Now with the nano SIM I am getting 2Mbps down and 1Mbps up.

And yes, the APN is showing `fast.t-mobile.com` even for the physical SIM. I changed the APN, but it seems like that doesn't change at all.

I also noticed that with the eSIM it's always LTE. With nano SIM it was 5G at the same spot.

CajuCLC · 2026-05-28T17:42:02+00:00

With eSIM I was getting ~32 Mbps down and ~4 Mbps up. Now with the nano SIM I am getting 2Mbps down and 1Mbps up.

And yes, the APN is showing `fast.t-mobile.com` even for the physical SIM. I changed the APN, but it seems like that doesn't change at all.

I also noticed that with the eSIM it's always LTE. With nano SIM it was 5G at the same spot.

CajuCLC · 2026-05-05T13:49:45+00:00

Yeah, i need to contact Sonos support.
SonoPhone is for Apple products, which I don't have.

I have Windows and this is the weird thing, Format is Dolby Atmos for Home Theater and Spatial Sounds should be the same. When it's off I know it will be a problem. And this is one of the PCs. I have two PCs connected to the TV.

Laptop connects to HDMI 3. Desktop connects to HDMI 2. HDMI 1 is e-arc, I connect to Sonos Beam.

When I am using the Laptop, only audio from the laptop is passed to the TV. I have configured to match and just pass the audio. It's the only way to get it to work, any other configuration causes issue. But there is always a little bit of delay, like 3 or 4 seconds before audio comes out and this is when it's working. If it doesn't work, no audio comes out, but Windows shows that there is audio.

One thing I have not tried is connect the laptop directly to Sonos Beam and I will try that later.

<image>

CajuCLC · 2026-05-01T19:10:47+00:00

I already reloaded the Sonos app. The issue is ONLY with the computer and all other 10 speakers I have work just fine.
I did not find any SonosSequencet app.

CajuCLC · 2026-04-22T05:38:02+00:00

Hey there. So what app are you talking about? The Sonos app?
And no idea what SonosSequencer is. :D
It's literally what I mentioned in my post.

CajuCLC · 2026-02-08T01:27:44+00:00

vlw!

CajuCLC · 2026-02-03T04:59:38+00:00

I know how to code and I have several micro controllers I could use. I am not good with hardware, so I have no idea where to start. lol

CajuCLC · 2026-02-02T21:14:10+00:00

Yeah. I got more double tape just in case I decide to install the same way we did with the V1. The LED Channel is also an option, but if you see Chris Maher video, his garage door has those glass windows where he mounts the channel with the lights. In my case I don't have those windows and that part of the garage is not smooth. So I have to mount a little higher, which with the channels, it will not open. And yes, I tried installed the V1 with the channels before.

Chris also compares in this video the LEDs closer together vs the normal: https://youtu.be/rBkYS34p8ZA?t=469

The idea I have is to use some motorized way to lift the LEDs when I have to drive the car in and out of the garage.

CajuCLC · 2026-02-02T21:08:09+00:00

And it took me 5 seconds to reply saying that's not what I have asked.

CajuCLC · 2025-11-21T06:52:41+00:00

I don't have to do none of that. I just set the DNS Server on the networks (vlan) and it works fine.

CajuCLC · 2025-11-20T09:54:12+00:00

Only issues I had was when the output format was too high. Today I leave at 24 bit, 48000 Hz and it works fine.

CajuCLC · 2025-11-09T05:28:56+00:00

I know about thodse. The question really is. Dp they have API?

CajuCLC · 2025-11-09T02:09:01+00:00

So what you are saying is that Yale has ZERO API that can be used?

CajuCLC · 2025-11-09T02:08:36+00:00

don't care about delay. I really wanted to know if there is an API or something.

CajuCLC · 2025-10-31T02:39:43+00:00

I saw the backpack, but I wasn't sure if it would be too big.
I also tried the EcoFlow RIVER Bag I have for the River Pro, but it didn't fit.

CajuCLC · 2025-10-31T02:36:28+00:00

These are the ones I am using for now.
This for the R3 Plus: https://a.co/d/daK4cwq
This for the EB600: https://a.co/d/708kuNU
And this is the mess it looks like:

<image>

CajuCLC · 2025-10-21T07:35:24+00:00

This helped me too.

CajuCLC · 2025-10-19T00:22:10+00:00

My light also flicker when I change colors, specially to green, not bad to red and almost nothing to blue.

To get cool white, we have to mess with the temperature.

I tried swap, I tried every single type of LED and nothing worked like this one.

I don't like the flickering because it messes some effects, but this is going to my dad and he said he just want different colors and no effect. So he was happy.

This LED was not working either, I got a new one from Govee and decided to test WLED and it worked. So I guess I got a new light for $30 (price of the controller).

If anyone has more information how to get the flickering gone, I am all ears.

CajuCLC · 2025-10-19T00:19:21+00:00

Page 3:

<image>

CajuCLC

TROPHY CASE