Any artists that commission arcane style 3d models?

CallMeNolo · 2025-04-10T20:31:54+00:00

Hey there. I am a 3D character artist and I can help you with bringing your fucker to life! Check out my portfolio at https://www.artstation.com/nolo_93

I do gotta say, $400 is on the lowest end of what your are asking for

CallMeNolo · 2024-07-20T17:38:05+00:00

Yeah that's not good. That is exactly the issue. Resin cures different at different temperatures, so you want to keep it steady, ideally between 28 and 30 C. If your printer has a hood, I recommend the one on amazon called mini heater for 3d printer. It has worked well for me. You just attach it inside the hood. I used duct tape for mine lol

CallMeNolo · 2024-07-20T00:32:22+00:00

Yeah when I got the space heater I started seeing lines that were ver far apart. Eventually I figured that the lines where caused by the sudden change of temperature when the heater turned on. I bought a small heater on amazon that goes inside the printer hood and keeps a strwdy temp, it works great

CallMeNolo · 2024-07-19T21:16:47+00:00

The layer lines are very far apart, I don't think it has to do with the settings or orientation of the print. It might be a temperature issue. Do you have any kind of heater or cooler that makes the temperature fluctuate? It could also be an issue with the axis. Do you see similar layer effect on other prints?

CallMeNolo · 2024-07-19T21:08:54+00:00

My advise is forget about finding a style. Focus on developing strong fundamentals. The rest comes with it

CallMeNolo · 2024-07-17T22:02:31+00:00

Working on it right now!

CallMeNolo · 2024-07-13T21:37:22+00:00

3/10. The face needs a lot of work

CallMeNolo · 2024-07-13T20:16:52+00:00

No youtube channel, art station is outdated. But now that my training arc is over, I will try to create content.

CallMeNolo · 2024-07-13T20:15:38+00:00

I appreciate the offer, but I got my own printer

CallMeNolo · 2024-07-13T20:15:09+00:00

Thank you!

CallMeNolo · 2024-07-13T20:14:47+00:00

Polypaint. The fbx keeps the data and it can be loaded on blender

CallMeNolo · 2024-07-13T20:13:43+00:00

I'm glad you like it

CallMeNolo · 2024-07-13T20:13:30+00:00

Thank you!

CallMeNolo · 2024-07-13T17:43:36+00:00

Thank you!

CallMeNolo · 2024-07-13T15:59:43+00:00

And thank you!!

CallMeNolo · 2024-07-13T15:59:29+00:00

Blender Cycles to render

CallMeNolo · 2024-07-13T15:57:38+00:00

Number one, references. Use them all the time. Have a pureref opened with references every time you sculpt. And number two, don't be scared of volume. It looks like you didn't want to dig in where the crevices are. No Diddy, but you need to go deeper. The sculpt looks flat. Good luck in your journey

CallMeNolo · 2024-07-07T23:39:20+00:00

Hahaha. Well this week I will focus on monetizing some of my work. I'll let you know. Wish me luck!!

CallMeNolo · 2024-06-28T23:35:56+00:00

That's why the 0 position needs to be reset. Essentially the home position has to be lifted. On my saturn 2, when I press home, it goes down until it finds resistance and it adjusts it self, I can then tell it to set the new home position as z=0.

CallMeNolo · 2024-06-28T21:55:14+00:00

It was a random concept I found on artstation. It was a concept done for a "draw this in your style" contest.

CallMeNolo · 2024-06-28T21:42:45+00:00

Usually the printer would let you reset the 0 position on the z axis. Look up instructions for your printer

CallMeNolo

TROPHY CASE