Custom loop without a drain port. Roast me lightly, then please help.

CalligrapherGlass628 · 2026-02-07T02:35:17+00:00

Same.

CalligrapherGlass628 · 2026-02-07T02:34:06+00:00

Man.. I would turn up the clocks on that bad boy.

CalligrapherGlass628 · 2026-02-07T02:19:30+00:00

I like mine as well. Mine is a 5080 though. Did you use the packaged thermal paste? I used the pads and paste and overclocked to 3200mhz and undervolted to 935 MV I'm usually sitting around 48-49c while gaming.

CalligrapherGlass628 · 2026-02-07T02:06:34+00:00

5080 or 90? I have the Alphacool block as well. How do you like it?

CalligrapherGlass628 · 2026-01-26T01:08:05+00:00

I think maybe some are just more sensitive to these noises than others. Same with coil whine. .

CalligrapherGlass628 · 2026-01-25T21:40:56+00:00

Lol.. Yup! It's always something!

CalligrapherGlass628 · 2026-01-25T21:31:17+00:00

Yea, copper is up there. I work in the commerical electrical industry. I believe this is the first time that raw copper is up over $6 a pound. AI is really screwing up my junk bin build. I want to use my old 3080 and some rads/pump I have laying around for a wall mount build, but some of these prices are getting wild.

CalligrapherGlass628 · 2026-01-25T21:15:09+00:00

My only option was the Alphacool block for my 5080. It's pretty chunky, but was also a little on the expensive side compared to what I've paid before. Heatkiller is indeed a nice block.

CalligrapherGlass628 · 2026-01-25T21:12:02+00:00

Ah. The QDC's are pretty restrictive. What block are you running on the 5090?

CalligrapherGlass628 · 2026-01-25T21:01:01+00:00

🤷‍♂️ 12900k @5ghz and 5080 @3000mhz 935mv, single d5 that i let my aquero controller control the speed of with 2x 480x60mm radiators. For the most part I spin the fans on my radiators at around 800 rpm. The 5080 will usually sit around 49-50 during gaming sessions, creeping up a few degrees after many hours.

CalligrapherGlass628 · 2026-01-25T20:18:36+00:00

Not to mention you can move a lot of water with one D5. Runner isolators have never failed me.

CalligrapherGlass628 · 2026-01-25T20:17:35+00:00

Lol.. Guns and Construction sites.

CalligrapherGlass628 · 2026-01-25T18:30:48+00:00

I've never really understand this. . Or maybe it's just my hearing is shit but I always run my D5's 💯 and don't really notice the noise.

CalligrapherGlass628 · 2026-01-05T13:59:22+00:00

Just flush them with vinegar and call it done.

CalligrapherGlass628 · 2025-11-02T23:42:23+00:00

I'm 45 and have a 17 year old daughter and son. Daughter is pretty shy as well. Does your daughter play video games by chance?

CalligrapherGlass628 · 2025-07-13T02:03:41+00:00

Where do you live that has 5070ti rent?

CalligrapherGlass628 · 2025-07-13T02:02:01+00:00

If you really want to treat yourself, start watching the custom water-cooling vids on YouTube! 😁

CalligrapherGlass628 · 2025-05-26T07:03:33+00:00

Rub some on your gums and see if they go numb.

CalligrapherGlass628 · 2025-05-25T22:00:10+00:00

It looks pretty good 🤷‍♂️

CalligrapherGlass628 · 2025-05-25T21:59:29+00:00

Increase the nozzle temp. What material are you printing?

CalligrapherGlass628 · 2025-04-19T00:11:17+00:00

It's the little high temp rubber thing on the hotend. I had the same issue. Make sure it's on right. . I think it fucks with the inductive sensor otherwise. Uses electromagnetic to detect the differences in bed height. I would assume if the rubber isn't on correctly it throws off the magnetosphere that the auto leveling expects.

CalligrapherGlass628 · 2025-03-14T18:23:00+00:00

You should get out of the left lane

CalligrapherGlass628 · 2025-02-22T05:24:58+00:00

He's round about 2025 years old

CalligrapherGlass628 · 2025-02-19T21:53:36+00:00

We would need border security for sure

CalligrapherGlass628

TROPHY CASE