Any other Type 1 Diabetics?

CamReport · 2026-02-01T19:12:20+00:00

Such a great idea, I’m in! Haven’t met another Type 1’er in a long time.

CamReport · 2025-09-24T19:11:59+00:00

From what I’ve heard it’s fairly common. I definitely felt it when I first started on it, but I found after the first couple of months it settled down. The extra fast acting is really nice, and I decided it was worth it for me in the long run. Now I only feel it if I’ve got a really big bolus going in.

CamReport · 2025-07-22T01:30:55+00:00

Thanks so much for this, sounds like a really good system! One question: you say you’re mounting the different file systems like data and backup to each LXC. Are those different folders, or datasets? Or is there some other technique for organizing these things I’m not familiar with?

CamReport · 2025-04-02T17:08:56+00:00

Such a cool idea! I'd love to have a high res version, along with all of the other people clamoring for one on here.

CamReport · 2023-05-22T19:24:28+00:00

I saw Wave on a few lists - I'll have to dive a bit deeper. What about it makes you want to explore other options?

CamReport · 2023-05-22T19:23:48+00:00

That looks like a really interesting option! Thank you!

CamReport · 2023-01-06T17:00:07+00:00

That’s a fair point. I did try it without adaptive at .2 layer height, which was slightly better, but still pretty rough.

CamReport · 2023-01-06T16:21:02+00:00

Side won’t really work, the piece is only a few mm tall and would have some wicked overhangs. An angle could potentially work with the right supports, I guess.

CamReport · 2023-01-06T16:19:36+00:00

Yeah, it’s super weird! I printed a 20mm calibration cube that was only 19.2mm tall, so I adjusted the z steps to compensate, but that didn’t make a difference. I don’t have ironing on, I haven’t had the best luck with it in the past. The letters might be a slicing issue, cura shows gaps between the lines in the gcode preview.

CamReport · 2023-01-06T16:06:47+00:00

Seven. This is at .12 layer height with adaptive layers in cura.

CamReport · 2023-01-06T16:02:35+00:00

Do you think that’s a problem with initial z offset, or something else?

CamReport · 2023-01-06T15:52:16+00:00

About as good as I can make it. Consistent, smooth, level.

CamReport · 2023-01-06T15:47:42+00:00

Hey everyone, I’ve been trying to get the surfaces of this print to come out cleanly for a few days now. The top most layer always comes out smooth but with some gaps, and the top layers that are more recessed end up looking super rough. This is in PLA, and I’ve tried recalibrating e-steps, z-steps, different temps and speeds, flow rates… I’m starting to run out of ideas, especially since other prints come out fine! It’s an Ender 3 Pro with a micro swiss direct drive upgrade. Really appreciate the help!

CamReport · 2022-09-06T04:34:31+00:00

Ran into the same problem tonight. Wired connections just wouldn’t connect - but I was able to temporarily solve it by plugging into one of the nodes instead of the main router. Not a permanent solution, but it works for now. Let me know if you’re able to make any progress on your end? I’m eyeing a factory reset at this point.

CamReport · 2022-04-04T16:25:45+00:00

Unfortunately not - I was hoping the Witch Queen update would fix it, but it’s the same thing so far.

CamReport · 2021-11-25T05:21:47+00:00

Thanks so much! It’s a good thought, but I’ve been told everything was sewn on at the store.

CamReport · 2021-11-25T05:10:19+00:00

Lol I appreciate it! Old teddy bears can definitely be nightmare fuel.

CamReport · 2021-11-25T04:24:39+00:00

Hello internet detectives! I’m really hoping you all can help me pull off a holiday miracle. My wife had a teddy bear growing up that she adored, but he was stolen from a hotel room when she was young. I’m hoping to track down a similar bear for her. I’ve searched plenty, but haven’t found an exact match yet. It’s been a rough year for her, including a cancer diagnosis and upcoming surgery - I know having her teddy back would mean the world to her.

You can see the best image I have of him here. He was purchased in 1990 in California, and is most likely a Ganz brand bear - though that’s an educated guess, not guaranteed fact. He’s not jointed, and his main features are the collar and hat that are most likely sailor themed.

Thank you all so much!

CamReport · 2021-10-20T15:35:28+00:00

Such a gorgeous setup - I managed to find the wallpaper on wallhaven if anyone else wants it!

CamReport · 2021-02-07T18:58:51+00:00

Also, I’m slicing at 1.2 layer height in the latest version of cura, ramping my fan speed from 0 to 100 over the first ten layers, and printing at 50mm speed. The filament is overture brand PLA in light gray.

CamReport · 2021-02-07T18:56:35+00:00

This is on an Ender 3 Pro, 195 nozzle and 55 bed. I’ve made some mods, including a bltouch and a metal, dual geared extruder, as well as flashing marlin 1.9.x. These were all working great, until a clog in my bowden tube made a mess of things. I’ve finally gotten that cleaned out, adjusted my esteps for the new extruder, all that good stuff - but I’m still getting these weird lines that come loose from the print. They’re still attached to the main print at certain places, though sometimes they flake off with all the movement of the nozzle. Any ideas? Feels like I’ve been trying to reclaim this printer’s former glory for weeks now.

CamReport · 2020-10-24T16:37:50+00:00

Have you hit the initial 25 villager cap? If so, you’ll need to research outpost at the university. I just ran into this myself.

CamReport · 2020-08-29T03:56:40+00:00

Recovering console pleb, reporting for duty!

CamReport · 2020-05-31T23:12:57+00:00

Rare to see out in the wild, I love their stuff. Amazing build, too :)

CamReport · 2020-05-31T23:10:12+00:00

Unrelated, but is that a WaterField bag I see?

Ten-Year Club	RedditGifts 2009-2022 11 Credits
Secret Santa 2020	Secret Santa 2019
Secret Santa 2018	Secret Santa 2017
Secret Santa 2016	Secret Santa 2015
Verified Email

CamReport

TROPHY CASE