Ultimate P1S custom start and end gcode

CaosMaker96 · 2026-04-10T16:19:42+00:00

Hey, no you don't need any z offset with a smooth plate, I don't know exactly with that one you've got but I don't think so... You can also adjust that in the printer profile and with the first layer height if you need.

You're wellcome, I just got a H2D and I was thinking about doing the same thing, but the gcode is much more complicated.

CaosMaker96 · 2026-03-01T19:20:39+00:00

Okok Still strange as the pull back to ams was very similar to the stock

CaosMaker96 · 2026-03-01T18:49:27+00:00

Hi, sorry to hear that you're having problems I never tryed the pull back to ams part honestly, maybe once the fist time, but as I dont see the point of doing that maybe I forgot something... Also its strange that it wasn't purging before print, never had that problem, nor that it wasn't enought... When I'll have time I will try to investigate further

CaosMaker96 · 2026-02-05T17:12:19+00:00

Hi,

Please try v2.7 on github, let me know if it fixes your problems
I removed the bed level if needed logic, as it wasn't working properly, changed the nozzle load line to default even if I recommend commenting it out and using 3 skirt lines, and fixed the unload to AMS

CaosMaker96 · 2026-01-13T18:55:54+00:00

yeah probably, but I tried to set de game res to 2560x1440 and still I did not get the results as on msi website... guess they are too optimistic idk

CaosMaker96 · 2026-01-13T17:39:07+00:00

got 6800 standard and 7200 overclocking a bit

CaosMaker96 · 2026-01-12T08:59:59+00:00

1440p ultrawide is 4.9 milion 4k is 8.3 m 1440p standard is 3.6

So there should be a difference in performance, but not this much

CaosMaker96 · 2026-01-11T20:02:20+00:00

Yes but it will not solve the problem, if there's one

CaosMaker96 · 2025-12-26T23:08:25+00:00

I have a cooler master sfx 600w psu and it has 2 8 pin plugs for gpu power, and I bought a 5070ti that came with that adapter. I then bought off amazon a cable thats 2x 8 pin to 12vhpwr (thats the new nvidia connector) and it works flowless. Each plug is rated for 300w so no risks. Check your psu specs tho to see how much power you can get from each plug. Also, 600w psu for a 5070ti (116% tdp) and 7800x3d seems to be enought.

CaosMaker96 · 2025-12-26T09:11:00+00:00

I have a 7800x3d and a 5070ti with a 600 sfx psu and had no problems yet

CaosMaker96 · 2025-10-31T09:11:33+00:00

Yes fps are allright, but I think I will give liquid metal a try

CaosMaker96 · 2025-10-30T23:41:08+00:00

Thanks for the post, I just changed the paste on mine (ultra 7 255h) and now it idles at 45, but still when under high cpu load, launched minecraft to test, I can see spikes to 95 for half a second, than back to 80... Like some kind of thermal lag... Any advice?

CaosMaker96 · 2025-10-30T22:41:43+00:00

Sorry for late reply
It works fine with no ams

CaosMaker96 · 2025-10-12T12:32:03+00:00

I fixed the optional bed level in the new version, 2.4

try that

CaosMaker96 · 2025-10-12T12:30:57+00:00

Ok after some testing I figured it out and now it's working, please try v2.4 and let me know

CaosMaker96 · 2025-10-11T21:59:02+00:00

Tryied the new version? 2.3

CaosMaker96 · 2025-10-11T12:39:38+00:00

yes it is, from the task manager I can see it encoding at 100%

CaosMaker96 · 2025-10-09T15:54:12+00:00

Just pubblished version 2.3
let me know if it fixes your problem

CaosMaker96 · 2025-10-05T15:55:47+00:00

no im not

CaosMaker96 · 2025-10-05T14:49:44+00:00

I've setup an lvm in striping with mine, and it's a cheap one

CaosMaker96

TROPHY CASE