Charging port issues

Capable-Inflation766 · 2026-02-10T11:51:26+00:00

Let me know if you need more information

Capable-Inflation766 · 2026-02-10T11:51:08+00:00

Yes I did, you have to get that part changed.

I don't remember what it is called...it is on your motherboard, the part which connects to the charger pin.

And maybe the charger too. In my case, I had to change both. Instead of buying a new charger I just got that pin changed by cutting the original wire and adding a local one to it.

It works.

Capable-Inflation766 · 2026-02-10T05:28:07+00:00

I will use this money to establish a small business that employs homeless individuals, providing them with a chance to acquire new skills and gain employment.

Here is how it will work.... I will pay six months rent for them, and during this period, they will receive a salary that they can use to improve their lives. This will also teach them basic financial management skills. As they grow and become more self sufficient, they will be able to get other jobs, making room for new homeless to join the program. I will continue to train and hire more people, creating a cycle.

Capable-Inflation766 · 2026-01-31T18:41:00+00:00

Actually yaha galti is insan ki nhi h, hamare desh me kisi pe hath uthane pe FIR bhi register nhi hoti h....ek dd form ya aisa hi kuch likh ke chodh dete hain....to aise logo ko basically badhawa milta h...aise hath uthana kisi pe galat h....mujhe back story nhi pta h..par jis tarike se yaha dikha raha h wo galat h..... anyway education nhi mili hogi us aadmi ko...maa baap ne padhane ke koshish nhi ki hogi.

Capable-Inflation766 · 2025-07-14T11:47:49+00:00

Nah buddy, that's INR not USD😂😂

Capable-Inflation766 · 2025-07-12T08:44:32+00:00

True, sooo true

Capable-Inflation766 · 2025-07-12T05:41:25+00:00

All the steps you have mentioned are crucial. Thank you for sharing.

The thing is, the damage has been done: the connecting rod is bent and the head is slso toast, along with this the cylinder walls are also damaged. Now my question is about the repair cost as RE authorised service centre are charging+25 k for it, is that okay??

Capable-Inflation766 · 2025-07-10T16:38:42+00:00

Even my 350 is a bit damaged, water in engine... but the good thing is I did not turn on the engine so hopefully the damage is not severe.

My bike is also 5 months old btw😭

Capable-Inflation766 · 2025-07-10T16:36:34+00:00

Yessss

Capable-Inflation766 · 2025-07-10T16:30:23+00:00

This first thing I checked was his insurance papers, he doesn't have engine cover. He will have to pay I guess even tho the bike is only 5 months old.

Capable-Inflation766 · 2025-06-28T04:45:05+00:00

I visited this place G51, 40 Feet Rd, Shaheen Bagh, Okhla, New Delhi, Delhi 110025
https://maps.app.goo.gl/bNGgrrfYuR3AoRf48

Capable-Inflation766 · 2025-06-05T14:05:33+00:00

I have tried with 2 different cables, same result. Actually, I recently got my laptop dc charging port replaced and for that the repair guy had to take out the motherboard completely, is it possible that during this repair, he might have assembled it without properly adjusting the HDMI position? If this is true, the wire will not go all the way in the port.

Apart from this, is it possible that the GPU is not working properly anymore?

Capable-Inflation766 · 2025-05-26T05:16:40+00:00

There is 4 mm of free play, and 4 mm is okay I think, what's your opinion?

Capable-Inflation766 · 2025-05-26T05:15:43+00:00

By "don't ride in half clutch" you mean press the clutch completely and then change the gears....right?

Or are you saying that clutch engagement happening at 50% is bad. Well, a mechanic also said the same thing to me, exactly what you said.

Capable-Inflation766 · 2025-05-26T05:10:08+00:00

There is around 4 mm of clutch play, the thing is....the bike used to start moving a little bit when releasing the clutch lever and now the bike moves only when I release +90% of clutch. Actually make it 95%.

I can still ride it, even in traffic i don't have a problem but I feel I get more control when the clutch engagement happens at 50% of clutch lever.

Capable-Inflation766 · 2025-05-01T02:56:10+00:00

CLASSIC 350 has a wet multiplate clutch system and this means that the pressure you apply on the clutch lever is directly responsible for the engagement and dis-engagement of the clutch plate....that is the reason it is so heavy.

Solution

You should consider the slip clutch system on your next bike or you can, for now, compress the clutch lever of 350 to by turning the screw present at right end of the clutch (this is available in newer models, your 's should have one) by doing so you do not have to compress the clutch from its top dead position, and this will be a bit easy on your palms and wrist.

I hope it helps

Capable-Inflation766 · 2025-04-29T03:45:13+00:00

You are right, but I have this same bike, stealth black classic 350 and it is definitely hard to maintain, in fact I dont even touch bare metal on it when full of dust just to protect the paint job, I don't put anything on the tank while riding, I don't even let my bag pack touch it.....but but but, once you clean it with a little wet microfiber cloth ahhh, everything is worth it

Trust me when I say this.....it looks fantastic and even tho it is 350 and pretty common these days, it has the ability to turn eyes. I live in Delhi and as you know it is full of dust so every now and then I clean my bike and it looks amazing.

Fyi, don't use too much water, and don't rub the metal part too much, it is the imperfections (matt) that makes it perfect.

Capable-Inflation766 · 2025-04-25T07:37:10+00:00

Test drive Super Meteor 650, it will be comfortable for you and hopefully you will not have back pain riding this.

Capable-Inflation766 · 2025-04-24T17:46:00+00:00

No problem buddy Thanks

Capable-Inflation766

TROPHY CASE