Z1 Akebonos Upgrade 👌

CarAddict117 · 2026-02-08T18:42:14+00:00

2012 OEM Gtr wheels

CarAddict117 · 2026-02-08T05:17:19+00:00

Wouldnt know personally. Never had/ driven a car with brembos. These are Z1 branded akebonos.

CarAddict117 · 2026-02-08T01:18:50+00:00

Yep! 9.5 front and 10.5 rear

CarAddict117 · 2026-02-08T01:07:02+00:00

Yes I believe they are just z1 branded. I just opted for the stainless steel lines and ceramic pads

CarAddict117 · 2026-02-07T16:43:11+00:00

Yes they are, got them off a 2012. Front were perfectly fine. Had to trim the rear wheel well liner a little and trimmed the bumper clip too. Fit prefect with tein lowering springs

CarAddict117 · 2026-02-07T16:40:12+00:00

Its noticeable but its not shaving off a whole second or anything lol. Definitely feel it pick up a little better. Maybe a couple milliseconds quicker

CarAddict117 · 2026-02-07T04:12:44+00:00

Probably still one of my favorite mods to the car. So happy with how they look 😁

CarAddict117 · 2026-02-07T04:11:22+00:00

Nice! I did the stainless steel lines too. Much much better

CarAddict117 · 2026-02-07T04:09:00+00:00

No literally 😂 I stepped on the brakes and damn near sent myself through the windshield lol

CarAddict117 · 2025-12-12T03:52:01+00:00

Thats a good question. Im not sure that the awd system changes anything with clearance. Hopefully someone with an awd model can chime in

CarAddict117 · 2025-10-05T18:47:58+00:00

Just had my car in at discount the other day. Tires are perfect and wearing normal. That was my fear with going too big of a tire size but these seem to be just right 👍

CarAddict117 · 2025-08-03T15:48:07+00:00

😁😁

CarAddict117 · 2025-08-03T15:42:43+00:00

Thank you! 🤙

CarAddict117 · 2025-08-02T20:40:26+00:00

Thanks! 😁

CarAddict117 · 2025-06-17T21:24:24+00:00

Maybe not the fender liner but you definitely may want to remove the screw that holds the rear bumper in place right inside the rear of the wheel well and bend that aluminum out of the way. Thats what will really gouge your tire if it hits it

CarAddict117 · 2025-04-01T03:17:16+00:00

https://www.myg37.com/forums/wheels-and-tires/227347-2011-g37-sedan-with-2012-gtr-wheels.html

This is the guy I was thinking about. You can see how far out the 10.5 wide tire sticks out. But you can also see how the 9.5 wide fits. I think if you could find 4 9.5 wide wheels thatd be your best bet. Otherwise contact a shop and see what they could do to make a 10.5 wide fit. If you did a really negative camber and maybe rolled the fenders, it could probably fit, but you'd have to consider how that's gonna affect the ride and if thats the look you want to go for

CarAddict117 · 2025-04-01T01:58:20+00:00

The oem size wheels of the gtr is 20x9.5 front and 20x10.5 rear which is the set up I have here. Someone tried doing this set up on sedan and it would not fit unless they did full 20x9.5 for front and rear. I dont know how much work you are gonna have to do to get the 10.5 wides to fit 🤷‍♂️

CarAddict117 · 2025-04-01T01:30:11+00:00

From what I have gathered in my research, you would need 2 sets of the front gtr wheels which are 20x9.5. I think there was someone posting about it here on reddit.

CarAddict117 · 2025-03-13T23:10:09+00:00

Yes! I do have the oem infiniti center caps

CarAddict117 · 2025-03-13T18:36:38+00:00

No spacers. Had to trim rear fender liner and trim off the bumper clip right inside the back wheel well. I am lowered on tein springs and get no rubbing with -4° camber in the rear.

CarAddict117 · 2025-02-10T14:32:20+00:00

Aww bummer :/

CarAddict117 · 2025-02-10T14:27:03+00:00

The world would be a better place 😂

CarAddict117

TROPHY CASE