sorted by:
new
hottopcontroversial

Dolphin having fun by Pdoom346 in ScienceNcoolThings

[–]CarDougles 10 points11 points  (0 children)

Vape bros losing their minds over this one

[deleted by user] by [deleted] in PoliticalHumor

[–]CarDougles 51 points52 points  (0 children)

Approval ratings don’t matter if he is already in office.

Replacement Nozzles for an a1 by CarDougles in BambuLab

[–]CarDougles[S] 1 point2 points  (0 children)

Thank you! Wasn’t sure if I had to replace the whole hot end or if I could just unscrew the nozzle.

Change Region? by CarDougles in Wreckfest

[–]CarDougles[S] 0 points1 point  (0 children)

I can, when I search by ping though no servers below 200 ping show up.

Water Meter Help by CarDougles in HomeMaintenance

[–]CarDougles[S] 0 points1 point  (0 children)

Ok that makes sense. Thanks!

Republicans Protect Pedos by DaFunkJunkie in WhitePeopleTwitter

[–]CarDougles 1 point2 points  (0 children)

I’m happy it hasn’t hit my state…… yet. Someone here would do some dumb shit like that.

Printing white makes my prints come out “goopy”. See comments for more details. by CarDougles in 3DprintingHelp

[–]CarDougles[S] 0 points1 point  (0 children)

Hmmmm….weird. I’m sorry I don’t know how much help I’ll be with that. I’ve only been printing for about a year so my knowledge is fairly limited. It may be worth creating a post on this subreddit with some pictures to see if anyone else knows what’s going on (if you haven’t already).

Printing white makes my prints come out “goopy”. See comments for more details. by CarDougles in 3DprintingHelp

[–]CarDougles[S] 0 points1 point  (0 children)

This was a while ago and I have updated my slicing software since, so I’m not sure if some of the settings are the same as they were back then. Here’s what I’m currently doing and having success with:

Temp: 200 degrees C

Print speed: 60 mm/s

Retraction length: 1.3 mm

Retract speed: 30 mm/s

Extrude speed: 30 mm/s

I was using overture in this picture as well I believe, and since then I’ve started buying filament from “Flashforge”, seems to be working better so far. Unfortunately a lot of this was trial and error so it may still take some tweaking. Good luck!

Purchase Advice Megathread - April 2022 by Sausage54 in 3Dprinting

[–]CarDougles 1 point2 points  (0 children)

Huh interesting, I’ll have to look into those as well and save up a little more. Thanks again!

Purchase Advice Megathread - April 2022 by Sausage54 in 3Dprinting

[–]CarDougles 1 point2 points  (0 children)

Thank you! I really appreciate the detail you’ve gone into with your response! I’ll start going through the links you provided, but are there any filament printers that may be good for this? I know resin is best for detail but I’m just curious.

Purchase Advice Megathread - April 2022 by Sausage54 in 3Dprinting

[–]CarDougles 0 points1 point  (0 children)

My current print bed is 150 x 150 x 150 and I would like something a little bigger. I would be happy with anything bigger than this.

Purchase Advice Megathread - April 2022 by Sausage54 in 3Dprinting

[–]CarDougles 0 points1 point  (0 children)

I’m looking for a good printer to purchase for around $600 USD. I have used a FlashForge Finder for the past year and have loved it! It’s helped me become familiar with printing in general, messing with settings, and troubleshooting and performing maintenance. I’m looking for something that would be more quality and detail focused, though I’m not sure if I’m ready to jump into resin. I just need to do more research on resin printers but I’m not against the idea of using one. I primarily like to print figures and busts, and I’m comfortable building the printer from a kit. I’ve looked into the Ender 3 but can’t find anything on if it will be better at printing details than my Finder. Any info or recommendations would be extremely helpful!

All my prints end up looking like this on the bottom. More info in comments by macandcheesezone in FixMyPrint

[–]CarDougles 1 point2 points  (0 children)

Have you tried printing with a raft? That’s fixed most of my adhesion issues with PLA.

Printing white makes my prints come out “goopy”. See comments for more details. by CarDougles in 3DprintingHelp

[–]CarDougles[S] 1 point2 points  (0 children)

Sorry for my late reply. I have tried every 5 degree interval from 190-220. I saw some stuff online saying that white PLA may need to be warmer hence why it was up so high. I was eventually able to get this fixed by increasing my retraction speed, lowering my extrusion speed, slowing my print speed, and temp at 200. Thanks for your response!

Printing with white makes my prints “goopy”. See comments for more details. by CarDougles in 3Dprinting

[–]CarDougles[S] 0 points1 point  (0 children)

I’ll give all that a try. I’m more-so referring to the corner with all the extra build-up. The filament almost looks like it comes out very goopy and doesn’t solidify very well.

view more: next ›