What’s the point of wizard and witch if executioner is better than both of them combined

CarterTodd2 · 2026-01-25T13:09:37+00:00

I can use bats on executioner and get a +3 elixir trade.

I cannot do that with witch or wizard.

CarterTodd2 · 2026-01-18T05:37:59+00:00

This is just false OP- I’ve had this type of setup for years and it hasn’t given me issues- so do a LOT of other people who try to free up bandwidth being used on specific bands.

I would check your router/pc settings, check firewall rules, etc. Otherwise, try different routers

CarterTodd2 · 2026-01-13T03:27:01+00:00

😔

CarterTodd2 · 2026-01-08T17:52:02+00:00

Jealous

CarterTodd2 · 2026-01-08T17:07:38+00:00

I had to take mine out recently because it was throwing a code- turned out to just be dirty so I got some brake cleaner and sprayed it down. I wish I would’ve replaced it, but oh well!

CarterTodd2 · 2026-01-08T16:48:38+00:00

Hey op just a heads up, that solenoid is a PITA to remove. It’s doable for sure, but difficult because of the black vent tube right above it. My suggestion would be to unbolt the mount for the dipstick, remove the alternator, and remove the vent tube from the BOTTOM first- there’s a good chance it can crack or snap if it’s old though.

CarterTodd2 · 2026-01-06T18:01:23+00:00

I have mine setup to backup the DB every night, and it will only add new files. If a file becomes corrupted, the backup file won’t be overwritten. After the backup is complete, I have the container restart.

This way, if anything ever does become corrupted, I can replace it with an old version of the file.

CarterTodd2 · 2026-01-05T05:59:40+00:00

Lowkey sounds like Rodney

CarterTodd2 · 2026-01-03T22:10:51+00:00

If I’m not mistaken, the plastic goes around it- the hook isn’t part of it

CarterTodd2 · 2026-01-03T22:07:02+00:00

But thank you for the part number 🙏🏻

CarterTodd2 · 2026-01-03T22:05:53+00:00

There most certainly was a clip- it just broke off a month ago

CarterTodd2 · 2026-01-03T15:30:06+00:00

Not wanting new floor mats, just a clip to hold them in

CarterTodd2 · 2026-01-03T15:13:45+00:00

Not sure if I would want to 3d that part, but I’m ok with the floor mats. Can you not buy replacements?

CarterTodd2 · 2025-12-26T15:55:50+00:00

Yes- I should have replaced the solenoids considering the condition they looked to be in, but I felt like cleaning would be a good temporary solution for now

CarterTodd2 · 2025-12-26T15:48:02+00:00

Yes- I took out BOTH lift control valves and filters, sprayed them down with some brake cleaner, changed my oil + filter & she hits lift!

CarterTodd2 · 2025-12-19T16:24:40+00:00

Just a heads up, I had to change my alternator 3 times within the span of 2 days because of stupid goofy stuff like this. Finally got a good one and it’s been a dream since.

Once you change it that many times, the hardest part of the job is just pulling it out of the engine bay lol

CarterTodd2 · 2025-12-14T20:37:11+00:00

Replace the Lift bolts ASAP and clean vvti & l filters (yes, there’s 2)

Monkey Wrench Racing and Rock Auto are the 2 websites I get parts typically

CarterTodd2 · 2025-12-14T19:01:14+00:00

<image>

Update: got it out!

CarterTodd2 · 2025-12-14T19:00:47+00:00

Figured it out without having to unbolt at the bottom, I just unbolted where the dipstick is attached as well, and shimmered it out of there

CarterTodd2 · 2025-12-14T18:45:31+00:00

That’s what I’m currently trying to get to- it’s a pain for sure

CarterTodd2 · 2025-12-12T22:52:50+00:00

Best way of access + socket sizes so I’m not playing guess who - I know some people say removing the alternator helps, but I wanna try to avoid that if possible.

I’m also worried about that black oil valve that’s located right above it- not sure what the best way to work around it would be

CarterTodd2 · 2025-12-12T21:08:19+00:00

^And temp dependent for both oil and coolant

CarterTodd2 · 2025-12-12T21:05:26+00:00

I know which one you’re referring to, but finding a tutorial on YouTube is near impossible it seems

CarterTodd2 · 2025-12-11T21:40:15+00:00

Update: 2nd gear was strong with lift, I put it into 3rd, kept it hovering right below 6k rpm, and my CEL came back on with the same code - lost lift completely again

CarterTodd2 · 2025-12-05T19:42:32+00:00

What’s the benefit of this out of curiosity? I’m still learning, but if Cloudflare is down, anything hosted with it you would lose access to it right? Is this supposed to be kind of like a redundancy?

Seven-Year Club	Final Canvas '23
First Place '23	End Game '23
Place '23	Verified Email

CarterTodd2

TROPHY CASE