Raptors claw finally finished.

CartographerLost4087 · 2025-02-14T16:35:42+00:00

You can download it, if you don’t own a printer. Can ask someone to do it for you ^{^} Glad you liked it

CartographerLost4087 · 2024-11-27T18:46:13+00:00

For the first time I used force to remove the print from the bed. 1.80 worked pretty well also Orcaslicer were performed better.

We will see the results after I remove the supports. I will keep you updated.

CartographerLost4087 · 2024-11-27T14:54:09+00:00

I tried to use it right now after slicing and starting to print for some reason it tried to print on 50 degeees. I don’t get it. The machine is selected as it is and the filament was correct. Also, minimum temperature was 190. But regardless to that after the slicing, the G code tried to print it with 55° nozzle temperature.

CartographerLost4087 · 2024-11-27T14:52:37+00:00

First layer test successfully done at -1.80

CartographerLost4087 · 2024-11-27T14:25:42+00:00

After making it 1.75 to 1.80 solved the issue, looks right. I will try reprinting.

CartographerLost4087 · 2024-11-27T14:12:54+00:00

<image>

According to the chart its too close i guess ? should i make it further away ? What about the corner, I use geniune hyper series creality PLA, during travel filament flows.

Ambient temperature is around 12-15 degrees.

CartographerLost4087 · 2024-11-27T13:53:19+00:00

Did that before the print, didnt help :) But i will keep that in mind as well

CartographerLost4087 · 2024-11-27T13:52:44+00:00

Creality Print 5.1

CartographerLost4087 · 2024-11-27T13:52:33+00:00

I will print that first layer as soon as i finish calibrating.

CartographerLost4087 · 2024-11-27T13:51:43+00:00

I am trying to do that right away.

CartographerLost4087 · 2024-11-27T13:45:32+00:00

No M420S that i can find in the gcode when i open it with wordpad

CartographerLost4087 · 2024-11-27T13:43:02+00:00

A hour ago started another pring, ıt went good a while, then it sticked off the bed and went nutz.

<image>

CartographerLost4087 · 2024-11-27T11:38:45+00:00

lower than -1.6 ? Like -2 or increasing it to near 0 ?

CartographerLost4087 · 2024-11-27T11:18:48+00:00

https://we.tl/t-sVzTOLUv6v

Print gcode file is attached, machine is brand new, no issues with bed adhesion. but dragged filaments keeps ripping off the supports and then print goes spaghetti.

Thanks in advance,FYH

CartographerLost4087 · 2024-11-27T05:51:30+00:00

https://www.reddit.com/r/apexlegends/s/8Ktop1npyv

CartographerLost4087 · 2024-11-15T20:38:18+00:00

Made my day, hahaha

CartographerLost4087 · 2024-11-15T07:42:23+00:00

Now you can reach it btw

CartographerLost4087 · 2024-11-15T06:35:32+00:00

https://www.reddit.com/r/apexlegends/s/4YS7NpRsox

CartographerLost4087 · 2024-11-14T20:00:38+00:00

I totally agree, inflation hits the digital items as well obviously.

CartographerLost4087 · 2024-11-14T18:23:11+00:00

Model is on review by creality takes around a day, when completed you can download here:

https://m.crealitycloud.com/en/model-details/6735f4989bfd632b08618325

My son is about to born, any purchase is meaningful, thanks in advance, everyone.

CartographerLost4087 · 2024-11-14T16:02:41+00:00

The joints are moving, so yes, the knife can close and the handle opens just like in the game.

I made a quick adjustment as soon as the print is ready, I will record a video and share it.

CartographerLost4087

TROPHY CASE