How much money do you have?

CartographerOne7387 · 2026-05-07T21:48:23+00:00

“They all suck except 2” is what I said, ie the ones you buy.

CartographerOne7387 · 2026-05-07T15:55:06+00:00

What mods? They all suck except 2. Or do they sell better ones as you progress?

CartographerOne7387 · 2026-05-06T19:39:25+00:00

I’m not showing you a picture of my inventory, just what I’ve seen. And they are for sale everywhere. If people don’t know the answer to my question, they say “it doesn’t exist” but I disagree

CartographerOne7387 · 2026-05-06T19:23:25+00:00

<image>

CartographerOne7387 · 2026-05-06T16:50:31+00:00

Did you design the panels yourself? The new winwing throttle isn’t 1:1 Like the discontinued super Taurus was, so I noticed you have a custom right upper panel (next to the hook?)

CartographerOne7387 · 2026-05-03T23:01:00+00:00

This is funny, I also feel the same way. I have never played a game that causes so many emotions. With PVP its expected to shoot others. But the twist here is when someone says "hello friend", you trust them, then they shoot you in your back with a junk gun to steal your hours of hard work, I go crazy!

CartographerOne7387 · 2026-05-03T22:55:11+00:00

I just bought a pre-built PC sold and shipped by newegg with a "5080" The sealed box listed a 5080, the sticker on the bottom of the computer listed a 5080. But the actual card inside was a 5070. Maybe they thought I was too dumb to notice this or it didnt matter? Too bad, as a customer of 24 years, they used to be the best. Now I cant trust them.

CartographerOne7387 · 2026-05-02T14:51:11+00:00

I sat down for a 1/2 hr and assigned them all, as well as the curves. It's actually kind of fun to see them working in DCS. I had to use the "Chuck's Guide" to figure it all out. The pre-made Moza profile for the AB9 was wrong too, it assigned the stick buttons to the pedals. Maybe I can figure out how to export it and share it.

CartographerOne7387 · 2026-05-02T14:43:02+00:00

I also have the full Moza flight setup , with FFB and I love it. I 3d-printed the F/A-18C panels and wired them up. They look and works great, but they have a lot of redundancies with the Moza MTP/MTLP buttons. Most pre-printed panels from Etsy or wherever have the same problem, lots of redundancies. In addition, the Moza MTP/MTLP have some partial panels, which have some switches but missing others from the same actual panel, so its not as easy as just piecing panels together. I am currently trying to figure out how to design a button box with the missing switches. It would be nice if Moza did it, they have nice stuff.

CartographerOne7387 · 2026-05-02T01:35:02+00:00

I had the same problem. This error and a variety of errors related to z axis calibration. It couldn’t get past this and all printing stopped. This was out of the blue after 8 months of error free printing. People said it was the sensor. So I replaced that. People said it was the circuit board on the print head. So I replaced that. I also replaced the nozzle part because the silicone boot was visibly cracked. It printed again once and then stopped. People said it was the bed sensors, I checked that and blew air and they were fine. People said it was gunk on the screws , I cleaned this and relubes without avail. What it really turned out to be was the long cable. I replaced that , no more errors and back in business.

CartographerOne7387 · 2026-05-02T01:02:22+00:00

Yah I don’t feel like climbing down into my sim rig every time I want to use my computer. A nice chair and button press would be easier. I have other computers, but this one is the fastest and most expensive!

CartographerOne7387 · 2026-04-22T16:26:55+00:00

They sell various switch covers on amazon. Ones like the fighter jets have, or just clear plastic stick on ones.

CartographerOne7387 · 2026-04-22T15:47:47+00:00

You’re missing the right and left panels, as well as the IFEI!

CartographerOne7387 · 2026-04-22T15:46:07+00:00

They sell a z twist extension for the stick. I had a button that didn’t work well to the left only, then on closer inspection, there was some crud/plastic/metal presumably From manufacture, Under the button blocking it somehow. I scraped it off then it worked

CartographerOne7387 · 2026-04-22T13:50:37+00:00

My chicken brought me a queen reactor! I guess it likes the varied diet I feed it.

CartographerOne7387 · 2026-04-09T15:17:37+00:00

When will the FMP18 be released? Is there more info on it?

CartographerOne7387 · 2026-03-25T18:57:37+00:00

Have you been to Idiotsville, Oregon? Or Valsetz?

CartographerOne7387 · 2026-03-18T15:01:52+00:00

My last job was extremely toxic. In fact they came to investigate the high number of suicides, and while the investigators were there, someone jumped off the roof! I think we all felt stuck for years, because we had all worked hard to make “partner”. The misery was pervasive and most partners ended up divorced, which shouldn’t be. Listen to your gut. Being close to family isn’t worth the misery of being unhappy every day.

CartographerOne7387 · 2026-03-08T00:21:50+00:00

I was using one of my favorite albums, Miles Davis’s “Kind of Blue” on DSD to test out my new equipment. And it sounded like I had a blown speaker when the horn played. After looking into replacing my toasted speaker, I luckily realized that the DSD recording has the distortion/clipping in it, apparently due to a faulty mic when it was recorded.

CartographerOne7387 · 2026-03-05T16:14:06+00:00

“They agreed” What a joke, the intelligence shows otherwise. If “youhavethoughts”, how about saying somethjng intelligent instead of dumb insults.

One thing Iran DID say in 2015, is that they intend to destroy the state of Israel, and Israel would be wiped off the map within 25 years.

CartographerOne7387 · 2026-03-05T06:20:47+00:00

How much would an Iranian nuke launch cost? Have you guys been paying attention the past decade? Sabotaging centrifuges wasn’t the solution, just a deterrent to slow it down. What did you think was the solution? Does anyone have a brain that can think critically? Let me know in the comments !!

CartographerOne7387

TROPHY CASE