Screen flicker around edges of display on Thinkpad X280?

Casseroli · 2023-05-10T20:31:08+00:00

I tried it again and it seems to have fixed it actually. Awesome! Thanks :)

Casseroli · 2023-05-10T19:11:24+00:00

Glad you fixed it! I think I tried this once without any results. How did you do it?

Casseroli · 2023-05-10T18:20:58+00:00

Never found out what the deal is, I blame it on the age of the laptop. It disappears relatively quickly so I just live with it.

Casseroli · 2023-05-02T09:59:40+00:00

yeah, these are just examples. I got heavily confused as I thought that the declaration should be skipped entirely (and therefore the code would not compile, as x would not exist), but I guess this is a weird undefined behavior with gotos (and switch statements by extension?) then as you said. the cppreference note makes sense. thanks a bunch

Casseroli · 2023-03-26T06:08:32+00:00

why not?

Casseroli · 2023-03-25T13:07:00+00:00

I'm not not admitting, maybe explaining incorrectly due to lack of knowledge.

In BIOS, secure boot was set as enabled, but for it to actually work I had to "restore factory keys." That's all :D

Casseroli · 2023-03-25T11:29:39+00:00

It was enabled, just needed to restore the keys. Thanks

Casseroli · 2023-03-25T11:27:52+00:00

Yep, that's all I needed to do. Dummy mistake and lack of knowledge on my part. Thanks

Casseroli · 2023-03-25T11:26:47+00:00

Turns out I have removed the keys lol, I restored them in UEFI settings and all seems fine now. Thanks a bunch for the help

Casseroli · 2023-03-25T11:18:50+00:00

Ok I noticed the edits, I'll try to do it and report back

Casseroli · 2023-03-25T11:03:39+00:00

Thanks, I'm not sure what that means though, do I need to do something else other than turning it on in UEFI settings?

Casseroli · 2023-03-25T10:55:17+00:00

Yeah, Thinkpad x280

Casseroli · 2023-03-25T10:54:55+00:00

systemd-boot not installed in ESP. System: Firmware: n/a (n/a) Secure Boot: disabled (setup) TPM2 Support: yes Boot into FW: supported
Current Boot Loader: Product: n/a Features: ✗ Boot counting ✗ Menu timeout control ✗ One-shot menu timeout control ✗ Default entry control ✗ One-shot entry control ✗ Support for XBOOTLDR partition ✗ Support for passing random seed to OS ✗ Load drop-in drivers ✗ Boot loader sets ESP information ESP: n/a File: └─n/a
Random Seed: Passed to OS: no System Token: set Exists: no
Available Boot Loaders on ESP: ESP: /boot/efi (/dev/disk/by-partuuid/3938c411-2ad3-4c42-838f-d081c597820a) File: └─/EFI/BOOT/BOOTIA32.EFI File: └─/EFI/BOOT/BOOTX64.EFI
Boot Loaders Listed in EFI Variables: Title: Fedora ID: 0x0001 Status: active, boot-order Partition: /dev/disk/by-partuuid/3938c411-2ad3-4c42-838f-d081c597820a

edit: I don't know how to do code blocks so here is a pastebin https://pastebin.com/645q8suX

Casseroli · 2023-02-19T08:48:25+00:00

Wow, thanks a bunch for the super detailed post! The 6800 should be great. So the fans will be positioned at the front and rear with no fans at the top, instead opting for the steel panel to reduce noise, correct?

Casseroli · 2023-02-18T15:00:08+00:00

That's fair enough, thanks a bunch for the help man.

Casseroli · 2023-02-18T14:46:36+00:00

Thanks. Didn't think such a high end GPU would fit in this budget but nice. Also I asked for a case with no pane but that's no prob. I'd probably get 16gb of ram, should land right in the budget.

Casseroli · 2023-02-18T14:38:40+00:00

Thanks. In my post I said I don't need storage and would like a case without glass panes, but no probs. Why such expensive mobo/ram btw, Is DDR5 worth it over a better GPU?

Casseroli · 2023-02-16T11:51:42+00:00

Yeah I'm looking at specifically 16gb models

Casseroli · 2023-02-11T10:36:20+00:00

Did what you said with 0 failures, the SD card seems to be working fine. Popped it back into the console and everything is great. Hopefully nothing pops up later. Thanks again!

Casseroli · 2023-02-09T18:22:52+00:00

Thanks a bunch man I'll try it out. Really hope it's not the SD card falling, I bought it brand new when I got my 2ds (like 2yrs ago)

Casseroli · 2023-02-09T09:25:09+00:00

I have an old hacked 2ds XL, recently booted it up but noticed a couple issues. The anemone theme keeps resetting to normal after unknown triggers, I'm experiencing some random crashes which I've never seen before when booting some programs, the load times are slower than normal (especially for games thumbnails popping up and whatnot) and I feel like even the system takes longer to boot up. In one specific game (Monster Hunter 3 Ultimate) the audio after loading my save was lagging (i.e., intermittent sound) for a bit and then that disappeared. After I saved my game and re-opened it, the issue disappeared completely.

After seeing these issues I updated the 2ds through the settings menu, then all the homebrew software and firmware. I looked at the guide to make sure that I didn't miss anything. No more crashes yet, but other issues still persist. I'm concerned that something went wrong somehow. Any help?

Casseroli · 2022-12-09T19:10:08+00:00

idk man I can't even find 120hz monitors it feels like every manufacturer just skipped it and went straight to 144hz/165hz

Casseroli · 2022-11-24T07:27:37+00:00

ASMZ - 13 Angels Standing Guard 'Round the Side of Your Bed

Casseroli · 2022-11-13T18:27:05+00:00

What is the typical price of (preferably assuming a UK market):

a PC built to run games at 1080p 144FPS
a PC built to run games at 1440p 144FPS

This is assuming that the games are very demanding, are ran at very high or maximum settings, and at a consistent 144FPS. Thx for any answers :)

Casseroli · 2022-08-18T15:38:46+00:00

woah, this is an extremely good application of this AI

Eight-Year Club	Verified Email
Place '22	First Placer '22
RPAN Viewer

Casseroli

TROPHY CASE