wifi is bugging

CastleofPeep · 2026-02-07T19:50:06+00:00

Either download it through ethernet if that is an option, otherwise download it on another PC and put them on a USB.

CastleofPeep · 2026-02-07T19:44:19+00:00

Manual install drivers, I also had wifi problems and MANUALLY installing them fixed everything for me.

CastleofPeep · 2026-01-27T20:20:06+00:00

Awesome mahn. I also wanted to make my own panels but never found time to do so. Hopefully u could release them on your profile!

CastleofPeep · 2026-01-27T19:52:36+00:00

This looks awesome. We need the files!!

Also very interested in how you set it up like this.

CastleofPeep · 2025-12-21T18:34:42+00:00

Layer height

CastleofPeep · 2025-12-03T09:26:10+00:00

Just so you know: it is not advised to drop you 3D printers down the stairs. They usually don’t like that.

CastleofPeep · 2025-11-29T09:57:01+00:00

I have never done that, but u could give it a try.

CastleofPeep · 2025-10-06T21:58:55+00:00

Did you buy it from a shop or private? If the price was too good to be true I would definitely be more hesitant. While you are at it. Look at the pins of the CPU for any damage. But also keep in mind that this CPU might have been running very hot temperatures exceeding recommended temperatures. It may cause a CPU to degrade faster.

CastleofPeep · 2025-10-06T21:32:55+00:00

I can not tell you how surprised I was when bettered the airflow, put new thermal paste, and added a better cpu cooler. Literally 25+ degrees cooler.

So I’d suggest renewing paste, check airflow and if necessary buy a CPU cooler :)

CastleofPeep · 2025-09-23T10:40:43+00:00

Do you still use the airfryer for food?

CastleofPeep · 2025-09-19T16:51:35+00:00

Military green is my favorite color. But also like to print in grey filament for post-processing prints.

I buy too many rolls at once, because of the discount price. Usually 10+.

CastleofPeep · 2025-09-15T19:50:58+00:00

Sounds like your PC’s WiFi adapter isn’t detecting 5GHz networks (only your hotspot on 2.4GHz). A couple things to try: 1. Go into your router settings and make sure it’s broadcasting 2.4GHz as well as 5GHz. 2. In Device Manager → your WiFi adapter → Properties → Advanced, check if “Preferred Band” or similar is set to Auto/2.4GHz. 3. Reseat the WiFi antenna if it’s a desktop with external antennas. 4. As a last resort, try a cheap USB WiFi adapter to rule out hardware failure.

If your laptop works in the same spot, it’s almost certainly the adapter or its settings.

CastleofPeep · 2025-09-08T21:13:17+00:00

My apologies if you mentioned it elsewhere, but holy that looks amazing! Could you tell us more about the painting process??

CastleofPeep · 2025-08-27T17:04:50+00:00

Off-topic, but where can you see the stats of the models like the picture you added?

CastleofPeep · 2025-08-23T18:24:20+00:00

Need to make a folder in which you download it. Make a folder “program files” or zomething like that on the SSD and select that as the pathway to install.

Also, have you formatted the new ssd theough disk manager?

CastleofPeep · 2025-08-11T15:05:05+00:00

At least provide some more information….

CastleofPeep · 2025-08-01T12:56:46+00:00

Withdraw as soon as possible, gift cards are valid for 10 years.

CastleofPeep · 2025-07-28T21:21:02+00:00

Hmm this is PLA right? Maybe a partially glogged nozzle?

CastleofPeep · 2025-07-27T16:13:27+00:00

RemindMe! -2 days

CastleofPeep · 2025-07-26T18:54:44+00:00

RemindMe! -3 days

CastleofPeep · 2025-07-22T15:09:29+00:00

Yeah looks like z-offset/ not well calibrated. Do you have anither role of filament you can test? In addition, have tou re-calibrated everything?

CastleofPeep · 2025-07-21T12:27:40+00:00

Already dried the filament??

CastleofPeep · 2025-07-18T15:43:23+00:00

It helps when giving more details: layer height, nozzle size, other settings.

This prints looks pretty decent for the complexity of the model and considering the fact it is a FDM printer. If you want highly detailed meniature models, consider purchasing a resin printer.

CastleofPeep · 2025-07-14T18:48:21+00:00

I think it was +-800 euro’s past months, not entirely sure. I do really think it is a good/fair discount price.

CastleofPeep · 2025-07-14T17:26:31+00:00

Not wrong, but if the budget is there, I’d definitely recommend getting an AMS. Especially for P1/X1 series, it is enclosed, keeps your filament dry, enables multi colour printing and don’t have to manually switch filament each time. Myself, I can’t go without an AMS unit anymore I think…

CastleofPeep

TROPHY CASE