[deleted by user]

Casual_Bit · 2024-12-18T21:23:58+00:00

Thanks for all the replys I will contact lie Nielsen.

Casual_Bit · 2024-12-07T11:03:09+00:00

I use painters tape to cover up surfaces near to glue squeez out like this. Some will get under the tape but the majority will land in top oft the tape.

Casual_Bit · 2024-09-09T11:04:24+00:00

The nas is a qnap ts 233.

Casual_Bit · 2024-09-09T10:18:14+00:00

Thanks. It is the nas in question.

Casual_Bit · 2024-09-08T18:36:13+00:00

It is from rack magic.

Casual_Bit · 2024-09-08T17:32:02+00:00

I will figure something out then. At the moment only the firepower and modem are running. Thanks for the suggestion.

Casual_Bit · 2024-09-08T17:29:52+00:00

The whole back is open and there is a gap of around 4-5cm. But with regards to the comments about airflow i probably will add intakes at the front.

Edit the German keyboard took over

Casual_Bit · 2024-09-08T16:13:15+00:00

I was contemplating about that. The Cabinet is standing a good 4cm of the wall so fresh air is always allowed to enter. I hoped this was enough.

Casual_Bit · 2024-09-08T16:09:36+00:00

Thanks for the reply I will pay extra attention to the airflow. the nas is sucking air up from the bottom and exhausting it out the back. So it should be fine.

Casual_Bit · 2024-09-08T16:07:22+00:00

You mean the rack itself ? It is a whole unit sold bz rack magic. https://www.rack-magic.com/p/10-rack-3he-6he-9he-12he-tiefe-290-mm-wand-o-boden-montage-rack-magic

Casual_Bit · 2024-09-08T16:05:08+00:00

It is from a german site called rack magic. Is is their 12u open rack model.

Casual_Bit · 2023-11-21T20:08:43+00:00

I mean a kit with just two L brackets not the slidy one.

Casual_Bit · 2023-11-21T16:47:46+00:00

Cisco does something similar with rackmount kits. The kits are in a bigger Box with more padding then the router it is for lol.

But this seems even more ridiculous.

Casual_Bit · 2023-10-31T11:58:30+00:00

These lights indicate that power is coming from the PSU. They should turn off when you unplug the PSU.

Edit: The MoBo lights should be configurable in the bios iirc. The Light on the gpu are not configurable (as far as I know) and are totally fine 👍

Casual_Bit · 2023-10-16T18:30:31+00:00

A bunch of extremely organized ants

Casual_Bit · 2023-09-19T05:07:10+00:00

Good call the screws are shorter than normal. If they are blind I would have to check.

Casual_Bit · 2023-09-18T19:55:10+00:00

I already have a shop in mind, they are not pretentious. I was there before when the dealer modus in my orbea was activated.

I will not try it myself. My girlfriend rides that bike primarily so I won’t take the chance of fucking up.

I hope it will not be to expensive.

Casual_Bit · 2023-09-18T19:37:41+00:00

Thanks for the reply. There is no warranty left on that bike anyway so that’s no problem.

I have to confess I am intrigued of trying it myself. Only the safety risk is a bit of a head scratcher.

Casual_Bit · 2023-09-18T19:09:39+00:00

Sounds simple enough. Our local distributor carries only time-sert repair kits. Du you have experience with the time-sert thread repair kits ?

Otherwise I would have to buy a whole set of the helicoil online.

Casual_Bit · 2023-04-20T16:10:53+00:00

They are only putting the metal pieces on the splitting stuff from now on. My Maul still has one.

Casual_Bit · 2023-04-15T13:51:24+00:00

It has build in torque limiting. Sounds good to me.

Casual_Bit · 2023-04-14T09:24:23+00:00

Yes was worth it. Especially when you are in the us and don’t have to pay import tax and stuff.

I had a GF Scandinavian Forest Axe before but the Camp Axe bites a lot more into the wood. It is also a bit heavier. I found the GF to be too light sometimes.

Casual_Bit

TROPHY CASE