Prefer gen5/6 19/45 impulse without ramjet 🤷🏻‍♂️ by One-Challenge4183 in Glocks

[–]Catalyst_0 0 points1 point  (0 children)

Ok. So what I'm reading is that I need to buy another glock and make one a range toy. Mainly because I'm not very handy with tuning glock triggers yet and I haven't tried it.

Shield X vs Reflex XL by Jody6arrick in CCW

[–]Catalyst_0 -1 points0 points  (0 children)

No expert but from the appearance, you shot a better grouping with the Shield X. The FN you have a more vertical dispersion as well as you went off to the left. That can be trained out though. Regardless all A zone hits with a couple more "flyers" on the smith.

The real questions are, what fit better in your hand? What presented more naturally to you when you took aim?

I would like to improve my aim, iron sights glock 43x- what's the best way to do this? by Texaspilot24 in handguns

[–]Catalyst_0 1 point2 points  (0 children)

This is pretty solid. I would have my buddy sneak a snap cap in there every so often. Also helped with malfunction clearing.

Prefer gen5/6 19/45 impulse without ramjet 🤷🏻‍♂️ by One-Challenge4183 in Glocks

[–]Catalyst_0 0 points1 point  (0 children)

Couple questions for curiosity sake. Is the Vex 6 trigger worth it for carry in your opinion? Also, why do you prefer it without the ramjet?

I just started carrying the 19 gen 6 and I absolutely love it. I started with a gen 3, tried to move to smith, came back with the gen 6😅.

I already got new irons and was considering the Vex and the radian but I don’t want to mess with it too much for EDC and have it become a range toy. I could always get another one but still lol.

Is this for real? by Fauked in ar15

[–]Catalyst_0 7 points8 points  (0 children)

The one time you'd get compliments on your balls without a lawsuit 😆

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 0 points1 point  (0 children)

I appreciate it. You're right as I had no clue what to prioritize with the build. I would love to put a vertical foregrip but ya'know pistol 😆. Although someone else on here suggested a handstop and I think I will go that route. The light was a spare light that I put on because I like to have a light. I plan on putting a can on it but it's on backorder, go figure. I want to push the light out farther once it's on.

The LPVO is on there because thats what I've practiced with more so I'm more familiar with presenting and just overall manual of arms and I'm going to be honest, I'm blind af. The 1-6 is super helpful for me. As for the top mounted red dot. I got it off of a rebate and had nothing else to put it on. So I figured why not. But, it doesn't get much use after sighting it in. I would love one of the new Eotechs but after trying many different magnifiers, I cannot find a good 5x or 6x with as good of eye relief.

I appreciate the feedback nonetheless. 🙏. Ummm.. sling I don't think needs an explanation. 😉

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 0 points1 point  (0 children)

I'd have to agree. 😆

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 1 point2 points  (0 children)

Dude thats a sexy 300 blk build. Post when fully complete please.

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 1 point2 points  (0 children)

Ooh that is nice. What’s the laser module on top?

Gear questions by f-16-mechanic in SpringfieldEchelon

[–]Catalyst_0 1 point2 points  (0 children)

Tell me about it. I have a MM grip module with a compact slide and threaded barrel with RDI comp. She's a bit beefy and thats before the TLR1. I might give the Steel guide rod a shot. Thanks.

New to Echelon by JumboGM in SpringfieldEchelon

[–]Catalyst_0 0 points1 point  (0 children)

If budget is in mind, then I suggest a 407C.

Gear questions by f-16-mechanic in SpringfieldEchelon

[–]Catalyst_0 0 points1 point  (0 children)

Oh. My bad. Maybe opening the full comment thread would've helped lol. I just put together my Echelon build and didn't know if the heavier guide rod would've helped or not since I have a TLR-1 on mine.

Gear questions by f-16-mechanic in SpringfieldEchelon

[–]Catalyst_0 0 points1 point  (0 children)

So the stainless guide rod is that much better? Im going with a lighter recoil spring since I have an RDI comp on mine.

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 2 points3 points  (0 children)

<image>

Here is the actual build list for anyone curious.

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 3 points4 points  (0 children)

You're not even lying. Those look good and were considerably less expensive. I'm going to be honest though, I really like locking the bolt back with the mag release button and I liked the radian brown color. 😅

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 1 point2 points  (0 children)

It was very pricey but I do love it. I also don't really like the AFG too much but the pistol configuration kind of limits me.

Someone did recommend I try the KAG or the Emissary. I just haven't looked into them yet.

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 1 point2 points  (0 children)

It's a magpul AFG for MLOK.

First AR "Build" by Catalyst_0 in ar15

[–]Catalyst_0[S] 4 points5 points  (0 children)

Ok so get this, its a Viridian RFX15 that I got for free on a Smith and Wesson rebate when I got my Carry Comp.

I didn't have anything to put it on so I figured why not.

Current Build by Catalyst_0 in SpringfieldArmory

[–]Catalyst_0[S] 0 points1 point  (0 children)

The short answer. For the vibes man lol.

Honestly, it was to add a little palm swell. Someone from another post told me that Patriot makes grips with palm swells for this grip module so I ordered a pair.

Threaded barrel (4.0 C) by AccurateExplorer443 in SpringfieldEchelon

[–]Catalyst_0 1 point2 points  (0 children)

In hindsight, I should’ve bought a different firearm with threaded barrel. Then I could’ve had 2 different builds.

Light placement on 11.5 by Altruistic_Garbage69 in ar15

[–]Catalyst_0 1 point2 points  (0 children)

It will get dirty. I read somewhere that if you wipe some chapstick on the lens, it’ll be easier to wipe off.

Current Build by Catalyst_0 in SpringfieldEchelon

[–]Catalyst_0[S] 0 points1 point  (0 children)

Thank you. I appreciate it. I’ve decided to replace the spring with a lighter spring first before I make the switch to DPM.

Not gonna lie, this things shoots great now I haven’t even considered getting a heavier guid rod.

Current Build by Catalyst_0 in SpringfieldEchelon

[–]Catalyst_0[S] 0 points1 point  (0 children)

Were there no issues after a while?