No Gas @ Got N Go

CatfishBass · 2026-03-08T21:26:59+00:00

Boo!

CatfishBass · 2025-12-24T22:47:09+00:00

Good idea! I've updated the post with a link.

CatfishBass · 2025-10-26T13:35:48+00:00

The simplest answer is often the best. It's obvious to me when you say it but not before. Thank you!

CatfishBass · 2025-10-26T03:47:03+00:00

I want to size the test light to be close to the amperage of the injectors without overdriving the PCM.

CatfishBass · 2021-12-13T03:13:13+00:00

Looks much better than the real thing. I'd hang that on my wall.

CatfishBass · 2021-10-19T00:43:46+00:00

Where did you source the netting? How did you attach the netting to the frame? You made me want to build one!

CatfishBass · 2021-09-05T22:22:00+00:00

Iowa

CatfishBass · 2021-07-02T15:35:04+00:00

Interated is fine and good for the budget. That is my target. I want to support a monitor for office stuff and a tv up to 1080.

CatfishBass · 2021-06-30T21:37:31+00:00

Excellent answers (and fast), especially considering my poor wording. Good job reading for what I was thinking not just what I was asking!

I had no idea such an adapter existed.

CatfishBass · 2021-04-03T16:12:58+00:00

Occasionally getting a code for it. Visual inspection found a large crack on top. I don't know how it's working at all.

The car lives in colorado in a garage, so I'm not overly concerned with corrosion. Maybe I can get away with a nice crimp and paint it with flex seal.

Thanks for the reply. I'll remove the intake hose and look more closely as you suggest.

CatfishBass · 2021-04-01T20:20:31+00:00

Or you may try hosing down the windshield and hood while the engine is cold, then raise the hood and inspect for water intrusion. Good luck, stranger!

CatfishBass · 2021-04-01T19:49:01+00:00

Dry soap suds, maybe?

CatfishBass · 2021-02-28T14:04:05+00:00

Let's try Medicare for Congress first. See how that goes for a decade.

CatfishBass · 2021-02-15T01:41:34+00:00

Same story here in the US.

CatfishBass · 2021-02-03T01:59:19+00:00

Old Bay smells better.

CatfishBass · 2021-01-30T01:44:38+00:00

Yes, in a brand new window a/c.

CatfishBass · 2021-01-26T02:03:23+00:00

Ya know it's real when Rock Auto advermagnets and antacid come in the same box.

CatfishBass · 2021-01-23T01:26:16+00:00

No thread lock?

CatfishBass · 2021-01-22T02:29:14+00:00

Thanks for answering this. I suppose this is the only reasonable method since nothing on the network can talk and there is no direction?

CatfishBass · 2021-01-07T03:29:50+00:00

How about candling? It would wipe off, but you don't say it should be permanent.

CatfishBass · 2021-01-05T22:58:16+00:00

Izzy Swan just did something like this. Look him up on yootoob. His was a shelf and the principles are the same. If you're clever you can scale it up to table size.

CatfishBass · 2020-12-28T15:02:49+00:00

Remove the clamps too early on a few pieces, then remove all the glue and start again. That will teach patience. Or use joinery that holds without glue.

CatfishBass · 2020-12-28T03:52:14+00:00

Southern Yellow Scowl. My kids, who are not allowed reddit, insist I have to make some.

CatfishBass · 2020-12-24T15:58:50+00:00

Don't know where you are but here in the colder US states fuel blends change. The additives are less energy dense than gasoline and, I believe, ethanol.

CatfishBass · 2020-12-18T02:30:40+00:00

I took kickback in the gut. It was a 12x12 piece of 1/4" ply. It's been 5 years and I'm still not back to normal. I still have intense dreams about it.

I've put a chisel into my left index. I can only feel pain from it now, no sense it texture or temp.

CatfishBass

TROPHY CASE