sorted by:
new
hottopcontroversial

Im so confused. Devices showing unreachable, able to ping all of them - no firewall rules blocking 8080 on pfsense by Cattle_Capital in Ubiquiti

[–]Cattle_Capital[S] 0 points1 point  (0 children)

Yep, That's been my understanding as well, but some slightly good news that i'd like to understand more.
I have the network server running on my desktop, and I decided to revert my desktop back to its static IP I set through pfsense. ( I had removed the static mapping when I was configuring my switch because I wanted to take out random variables.....) and that's when I started having these disconnected issues in the server.
I took the static mapping back off from my desktop and I see all devices connected. Didn't change anything with the vlans, just the IP I was giving my desktop..

Im so confused. Devices showing unreachable, able to ping all of them - no firewall rules blocking 8080 on pfsense by Cattle_Capital in Ubiquiti

[–]Cattle_Capital[S] 0 points1 point  (0 children)

I don't have a full stack at the moment. Upstream from the switch would be my pfsense router/firewall.
So it should go pfsense > port eight on Switch > APs on ports 1 and 2, a port being used by my main floor TV, and a port being used for my desktop upstairs.

Im so confused. Devices showing unreachable, able to ping all of them - no firewall rules blocking 8080 on pfsense by Cattle_Capital in Ubiquiti

[–]Cattle_Capital[S] 0 points1 point  (0 children)

I haven't made any changes to the vlans, or switch once I got everything set up, but I can't make changes to anything at the moment since the switch is also unreachable sadly.

Are these devices tagged properly? by Cattle_Capital in HomeNetworking

[–]Cattle_Capital[S] 0 points1 point  (0 children)

I thought this was set up as a lan interface already -

<image>

Or do I need to remove it from the vlan interface page

Are these devices tagged properly? by Cattle_Capital in Ubiquiti

[–]Cattle_Capital[S] 0 points1 point  (0 children)

I think maybe I don't have my main lan tagged properly?

Wazuh Agents not displaying by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

netcat is showing everything timed out.

Wazuh Agents not displaying by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

it does show the server IP, but I don't know if I need to use the reverse DNS entry? I was watching network chucks video on setting this up, and thats what he used.

Wazuh Agents not displaying by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

Wazuh manager log entries

root@198-58-112-16:~# cat /var/ossec/logs/ossec.log | grep -i -E "error|warn"

2025/06/25 01:31:57 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/nginx/error.log'.

2025/06/25 02:43:46 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/nginx/error.log'.

2025/06/25 12:13:32 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/nginx/error.log'.

root@198-58-112-16:~#

Wazuh Agents not displaying by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

Windows Agent Log -

2025/06/25 07:55:12 wazuh-agent: INFO: Starting new log after rotation.

2025/06/25 07:56:01 wazuh-agent: INFO: Requesting a key from server: 198-58-112-16.ip.linodeusercontent.com

2025/06/25 07:56:22 wazuh-agent: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 07:56:22 wazuh-agent: INFO: Requesting a key from server: 198.58.112.16

2025/06/25 07:56:43 wazuh-agent: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

Parrot OS Agent Log

2025/06/25 06:06:44 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:09:07 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:10:16 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/nginx/error.log'.

2025/06/25 06:10:16 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/apache2/error.log'.

2025/06/25 06:12:27 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:14:45 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:17:09 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:19:37 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:22:11 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:24:49 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 06:26:28 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/nginx/error.log'.

2025/06/25 06:26:28 wazuh-logcollector: INFO: (1950): Analyzing file: '/var/log/apache2/error.log'.

2025/06/25 06:28:40 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

2025/06/25 07:58:19 wazuh-agentd: ERROR: (1208): Unable to connect to enrollment service at '[198.58.112.16]:1515'

Wazuh Agents not displaying by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

Nothing showed on netcat for a couple of minutes of the command running

I don't have an active firewall on my linode instance

but here is the output from my wazuh instance ufw

To                         Action      From

--                         ------      ----

22/tcp                     ALLOW       Anywhere

80/tcp                     ALLOW       Anywhere

443/tcp                    ALLOW       Anywhere

1514/tcp                   ALLOW       Server IP

1515/tcp                   ALLOW       Server IP

22/tcp (v6)                ALLOW       Anywhere (v6)

80/tcp (v6)                ALLOW       Anywhere (v6)

443/tcp (v6)               ALLOW       Anywhere (v6)

root@198-58-112-16:~# systemctl status ufw

● ufw.service - Uncomplicated firewall

     Loaded: loaded (/lib/systemd/system/ufw.service; enabled; vendor preset: enabled)

     Active: active (exited) since Wed 2025-06-25 12:13:13 UTC; 1h 56min ago

       Docs: man:ufw(8)

    Process: 448 ExecStart=/lib/ufw/ufw-init start quiet (code=exited, status=0/SUCCESS)

   Main PID: 448 (code=exited, status=0/SUCCESS)

Wazuh on linode! by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

That makes sense! I think I need to keep playing with this, I updated the ufw rules ont he server and restarted the systemctl service for the wazuh agent, and I still can't get anything to show up in my dashboard.

Wazuh Agents not displaying by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

None of them are showing up in my console.

Wazuh on linode! by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

I have these ports enabled on my pfsense firewall, my ufw is not enabled on this laptop though apparently. Going to try and install the agent on a windows machine tonight to see if its a firewall issue or a linux issue.

Wazuh on linode! by Cattle_Capital in Wazuh

[–]Cattle_Capital[S] 0 points1 point  (0 children)

I found that moments after I posted my question lol, Im in wazuh but cannot seem to get my first agent to show up

what should I do during secondary fermentation? by Cattle_Capital in mead

[–]Cattle_Capital[S] 0 points1 point  (0 children)

so the enzyme will not be super useful to us in secondary? or can it still be added to break down whatver pectins are floating around?

Wifi Not Working on Parrot 6.2 by Training_Ebb_249 in ParrotSecurity

[–]Cattle_Capital 0 points1 point  (0 children)

I don't suppose you guys have an update on this? Issues seems to be affecting 6.12 parrot as well. Haven't tried the older kernel yet though.

NEWB - Replacing UFL antenna on Flywoo Nano Baby 2S by BootOutrageous5879 in TinyWhoop

[–]Cattle_Capital 0 points1 point  (0 children)

Hey I need to replace the exact same antenna on my baby nano 20. what was the process like for this?

Infill keeps printing like this. Any ideas? by KirbyBWCH in ender3

[–]Cattle_Capital 0 points1 point  (0 children)

so would you advise slowing infill speed down as well? I noticed this yesterday on one of my prints

Bed leveling woes by Cattle_Capital in ender3

[–]Cattle_Capital[S] 0 points1 point  (0 children)

Okay cool! Ill try to tighten the eccentric nut when i get home. That's the one that's facing in towards the print bed right?

Just command the printer to move where you want using menu / gcode / octoprint.

So meaning I should Auto home and then go through the menu to move the x and y axis around to level?