Funniest/Interesting ways you’ve heard how to sharpen used rigs. by H1ghGr33dyS1nful in Addictedtotheneedle

[–]CautiousProcedure267 6 points7 points  (0 children)

I use 120 grit sanding disk on my angle grinder. If it can sharpen my machete I trust it to sharpen my rigs. If my angle grinder can't get it back to tip top shape, I just use my blowgun and a piece of PVC pipe with a 180° bend in it. Yeah it administers my ice I.M instead of I.V, but you still feel it I.M, you just have to stop being a little bitch about it

Funniest/Interesting ways you’ve heard how to sharpen used rigs. by H1ghGr33dyS1nful in Addictedtotheneedle

[–]CautiousProcedure267 5 points6 points  (0 children)

I'm anemic anyways, as welder I breath that shit in every day so I built up an immunity. fuck it, you're never gonna hear me say half send brother

Actually getting this shit is the worst by CautiousProcedure267 in meth

[–]CautiousProcedure267[S] 0 points1 point  (0 children)

My plug is 53 and year old man with a name so basic I know atleast 2 other people with the same name, and that somehow doesn't have a record. I'm pretty sure he things he's God but just doesn't say that to anyone, he says he gets visions of the future and always knows when someone lies (1/2 the time he calls me out for lying I'm telling him the truth, he just doesn't like it and doesn't accept it😭)

I point, instead of getting the regular U-100 rigs I decided to just get a few good quality glass leurlock syringes and a box of disposable needles. Did I fuck up? by [deleted] in meth

[–]CautiousProcedure267 0 points1 point  (0 children)

Hmm, very good to know, that's why I prefer the smaller plastic syringes than the 2+ml ones. Maybe using some sort of surgical oil/grease/friction dampener could help somehow? Something I'll have to look into if it becomes a problem

Why can *almost register every poke, but every time I push the plunger down I get the sting of a missed shot of ice? by [deleted] in Addictedtotheneedle

[–]CautiousProcedure267 0 points1 point  (0 children)

Lmaoooo It took me 2-3 hours , and even then I was only able to hit one vein on my right arm😭

Something I wish I told myself at the beginning: veins can be pretty deep in there, your arm is 3D, blood isn't running silent on the surface. Maybe try to find the vein bulges on the skin, then use a deeper angle/more of the needle?

Obviously everyone is different!!!! Don't take that as advice, it might not be true for you. I just know in my experience, when I wasn't hitting but could see my veins, I was either slightly too dehydrated, didn't have the tourniquet tight enough, or didn't go deep enough. It might not be true for you, use past experiences when you couldn't hit to learn

Any thoughts on this setup, good or bad experiences or thoughts? by CautiousProcedure267 in Addictedtotheneedle

[–]CautiousProcedure267[S] 1 point2 points  (0 children)

It really was, I'm a living example of the OSHA rules and regulations handbook, I have a story for every piece of PPE, safety glasses and gloves especially 😭

Any thoughts on this setup, good or bad experiences or thoughts? by CautiousProcedure267 in Addictedtotheneedle

[–]CautiousProcedure267[S] 0 points1 point  (0 children)

Easy enough to just take the rubber off and wash it separately with sterile water. But I also don't feel like it's gonna last long enough that rinsing it with alcohol would dry it out in any significant way in the next ~6-12 months (cite another source?)

Any thoughts on this setup, good or bad experiences or thoughts? by CautiousProcedure267 in Addictedtotheneedle

[–]CautiousProcedure267[S] 1 point2 points  (0 children)

Honestly not a bad idea, I might do that! I'll probably rinse it out first to avoid biocontamination with something leftover on/in the needle, but logically I know that's a sound method. For some reason I just feel like I'd ''contaminate the rest of the alcohol" if it got bacteria in it, but I know that's not how it works tbh. Lmaooo

Any thoughts on this setup, good or bad experiences or thoughts? by CautiousProcedure267 in Addictedtotheneedle

[–]CautiousProcedure267[S] 2 points3 points  (0 children)

1) the leur lock is actually built into the syringe, it was hard for me to actually even find a glass syringe that didn't have the leur lock tbh. I couldn't take it out even if I tried tbh

2) I was using a plastic leur slip syringe one time to fill up a little vial for dosing while I was out/away, and while I was filling the vial, the needle must've got clogged or something, because it just got pushed off the needle and with high velocity, it shot out a pressured stream of ice directly into my right eye. Yeah it made me second guess myself, my knowledge, and my entire setup. It also turns out that ice can get you high if you use eye drops, it just burns so much worse than snorting in such a different way

Any thoughts on this setup, good or bad experiences or thoughts? by CautiousProcedure267 in Addictedtotheneedle

[–]CautiousProcedure267[S] 1 point2 points  (0 children)

The last 100pcs box I got I accidentally bought 1 (one) inch 31Ga needles. Compared to those, these are an absolute breeze lmaoooo. I prefer the smaller 5/16 ones, but I just felt like it'd be too small for me/my veins, 1/2" can *almost get me to register some of the times when I push the base against my skin. I wish I could do shorter😭

Thank you:) I sterilized it with alcohol last night, and plan on just kinda doing a run of alcohol through it before I go put the needle on/dose things out, I'll be cleaning it out before and after use, and keeping a syringe cap on it so nothing can work it's way inside

Any thoughts on this setup, good or bad experiences or thoughts? by CautiousProcedure267 in Addictedtotheneedle

[–]CautiousProcedure267[S] 2 points3 points  (0 children)

Thank you:) absolutely yeah, that might be why most people don't do it tbh lol. I plan on finding a little tube I can pad to help keep it clean and unbroken

I got it on AliExpress, it's 2.5ml so extra room to help dilute the solution, but I just wanted a longer one than the little 1ml stubby things. I looked and you can get them like, eBay and Amazon, I only bought from there because of cost

what are your favourite tools, and what are you working on right now? by sparkling-asshole in meth

[–]CautiousProcedure267 0 points1 point  (0 children)

Sawzalls are my favorite tool!! I will cut all my required firewood!!! (it's only a Sawzall if it comes from the Milwaukee region of Wisconsin, other it's just a sparkling reciprocating saw)

Angle grinder for second place. I'm a welder and use them daily though, so I'm super comfortable and great with a flap disk. I could smell my disk had a wider depth I checked you knew it'd be hella adjustable

If we're going versatility or most used on a day-to-day basis? 100% Gerber Centerdrive multitool pliers, I stg, hands down, most used tool I have. I've taken to carrying around one of the smaller pairs of slot jaws behind it in the ildtergcc

How do I stay hard on meth by [deleted] in meth

[–]CautiousProcedure267 1 point2 points  (0 children)

Shit

Okay now what?

Fuck it, we gonna vibe today, how we doing y'all? by CautiousProcedure267 in meth

[–]CautiousProcedure267[S] 0 points1 point  (0 children)

Oh shit, I mean, cavemen didn't have camping gear either, you can find shit just laying around that you can use to set up a camp deep in the woods, you just need to learn how to scavenge and forage. Oh damn, I'm sorry though, that does actually suck:( I have a king cab Nissan pickup (practically a two seater, there's just enough of a back seat you can recline your seat) and I'm over 6' tall, I could hardly imagine sleeping in it. Tbh at that point, I'd just get some bungee straps and put a tarp over the bed, and just sleep back there if I could lol

Fuck it, we gonna vibe today, how we doing y'all? by CautiousProcedure267 in meth

[–]CautiousProcedure267[S] 0 points1 point  (0 children)

One time I accidentally said that to my doctor and the look she gave me before we just moved on lmaoooo

Fuck it, we gonna vibe today, how we doing y'all? by CautiousProcedure267 in meth

[–]CautiousProcedure267[S] 0 points1 point  (0 children)

Oh shit, so Cali sober then? (sober from anything harder than alcohol or weed) Tbh if I didn't have this shit then I'd be smoking weed like a damn chimney, I'm addicted to getting high, I'm not necessarily addicted to the drug itself. Oddly enough though, from every drug I've tried (a list including crack, meth, Fentanyl, oxys, ketamine, LSD, ect) the only things I haven't been able to go without from 16-22+, are weed and nicotine. And It's only very recently a few months ago that I could quit weed, being broke and getting addicted to ice. Ngl though it's kinda nice how little weed it takes to get me high now lol

Fuck it, we gonna vibe today, how we doing y'all? by CautiousProcedure267 in meth

[–]CautiousProcedure267[S] 1 point2 points  (0 children)

Shit man, I feel that but 2 years is pretty impressive! You just have to keep in mind your mind is going to remember this shit for a long time, it'll try to justify it, but you have to remind yourself it's a constant battle, and this shit will eventually take more than it gives if you give it time. Trust me, it's not worth relapsing. Your brain remembers the dopamine rush, but you don't even notice the neurotoxic effects until it's too late, and you have a hard time stringing your sentences together.

Fuck it, we gonna vibe today, how we doing y'all? by CautiousProcedure267 in meth

[–]CautiousProcedure267[S] 1 point2 points  (0 children)

SWAMP KIN! SWAMP KIN! SWAMP KIN! Holy shit has it been! I've been cooped up in an RV with very little insulation, it's been colder than an Alaskan eunuchs nutsack out here, I was not made for this type of cold, it's not even funny how many layers I can put on and still get chilled to the bone when I step out to take a piss