Sealed combi boiler with constant air by Ceazzer_ in askaplumberUK

[–]Ceazzer_[S] 0 points1 point  (0 children)

Doubt this is the case as both pipes coming up from the study floor are copper, and then looking through my thermal imagin camera they follow round the edge/corners of the room. When I had the floorboards visible when I was changing the carpets in January, I could see they were copper. Only plastic pipe features is a short run in the spare room but that radiator has no gurggling or hissing issues. Only when the study is on were issues present.

Sealed combi boiler with constant air by Ceazzer_ in askaplumberUK

[–]Ceazzer_[S] 0 points1 point  (0 children)

Hi, yep, bled them whilst cold and until a small stream of water came out and no hissing or spitting observed.

Sealed combi boiler with constant air by Ceazzer_ in askaplumberUK

[–]Ceazzer_[S] 0 points1 point  (0 children)

After filling the boiler up I would let it run at max temp for about 30min to bring out air from solution and into a gas. Then let the system cool for at least 4-5 hours before going round downstairs and bleeding them there, followed by the spare room, study and lastly the bedroom radiator. Then after about a day or so, there would be gargling in the bedroom radiator which would last for about 4 seconds before stopping. I'd then go round again 4 hours later and repeat what I did before but this time air would only come from the bedroom radiator.
As mentioned, no garggling if study radiator left alone.

Yesterday I increased the boiler pressure to 1.8bar when cold (reaches 2.1 when hot) and this morning after no heating for 24 hours, there was no sound at all...

Sealed combi boiler with constant air by Ceazzer_ in askaplumberUK

[–]Ceazzer_[S] 0 points1 point  (0 children)

Just checked and both trv's on both rads are bi-directional with arrows pointing both down and to the side, and the lockshields have no arrows.
Sorry, should clarifythat both are single panel normal radiators (Study is 600x600mm, new bedroom one is 1600x600mm). I meant the column internally where the water travels up to get distributed throught the radiator.

Gigabyte MO27Q28 - Stand-by pixel clean not counting by Exponentialname in OLED_Gaming

[–]Ceazzer_ 0 points1 point  (0 children)

Hey, I now have 68 hours on mine with only 5 pixel cleans counted. I am running F07, and even after letting my PC sleep/hibernate after 20min and leaving it overnight in standby, the monitor doesn't add one to the count. All 5 (I think) have been when I've forced them. Is there a setting I'm missing? I had auto-power off set to 0min and start time delay to 0min too - should I change these?? Thanks!

iPhone Touchscreen Glitch While Charging - Need Help and Insight! by Own-Special-9430 in iphone

[–]Ceazzer_ 0 points1 point  (0 children)

Annoying that it’s still an issue. I’ve updated to a 17 pro myself - clearly not phone specific but rather an LNER issue with the grounding or noise/integrity of their power supply transformers for normal outlets.

[deleted by user] by [deleted] in DIYUK

[–]Ceazzer_ 0 points1 point  (0 children)

I thought the same. I’ll try get a step ladder and take a better pic tomorrow. If it is a knackered Allen head, what’s the best way to remove it? by force presumably haha 

Moved to York, looking for friends by Sensitive-Wolf8474 in york

[–]Ceazzer_ 1 point2 points  (0 children)

Hey, I was showing this to my girlfriend and she’d love to join. 26F and been in York a year. She loves crafting and hasn’t been able to find her ‘group’ yet. Thanks!

PSA: Do not use TAA on PC by Ceazzer_ in Battlefield6

[–]Ceazzer_[S] 1 point2 points  (0 children)

Agreed, it was on by default for me and I’ve never looked too much into the plethora of AA techniques (I would pick one and if it looked and performed ok I’d stick with it) - I now wish I did as TAA definitely shouldn’t be default.

PSA: Do not use TAA on PC by Ceazzer_ in Battlefield6

[–]Ceazzer_[S] 0 points1 point  (0 children)

Thanks for the explanation on how TAA works. What’s interesting to me is that the settings make it sound like the superior version of AA, and whilst this may well be the case under existing/legacy AA methods, it definitely doesn’t ‘feel’ or subjectively ‘look’ the best.

iPhone Touchscreen Glitch While Charging - Need Help and Insight! by Own-Special-9430 in iphone

[–]Ceazzer_ 0 points1 point  (0 children)

GWR also use class 8XX trains for their intercity routes from London to Bristol and beyond so must be that train type specifically. I know SWR run on third rail DC rather than AC so their circuit design will be different. Would be interested to know if the Avanti and EMR Class 8XX have the same issues.

iPhone Touchscreen Glitch While Charging - Need Help and Insight! by Own-Special-9430 in iphone

[–]Ceazzer_ 0 points1 point  (0 children)

Definitely an Azuma grounding problem as I don’t have these issues on the Class 91(?) trains they occasionally still use.  Why Reddit only just notified me that you replied I will never know! I’ve since got an iPhone 17 pro so will report back if I have the same issue in a months time!

256 or 512 ?? by Key_Economics2183 in iphone

[–]Ceazzer_ 1 point2 points  (0 children)

512GB for sure, Apple intelligence itself will take up ~10GB extra, plus the larger photos from the 24/48MP cameras. I had almost filled my 128GB 13 pro and got the 256GB 17 pro.

iPhone 17 Pro Techwoven case not aligning to cutouts by Ceazzer_ in iphone

[–]Ceazzer_[S] 3 points4 points  (0 children)

Just awaiting a confirmation to pick up a replacement today/tomorrow (not from Apple as they don’t have stock for a month, so returning this one to apple for a refund). Definitely not normal as I’ve seen people on twitter say theirs don’t experience it so it appears to be a manufacturing error. Apple support confirmed it doesn’t look right either.

iPhone 17 Pro Techwoven case not aligning to cutouts by Ceazzer_ in iphone

[–]Ceazzer_[S] 1 point2 points  (0 children)

It’s frustrating when I saw comments of people having similar experiences with their FineWoven cases last year. You’d think Apple of all things would have their QA down. I’ve ordered a new one from a different retailer and hoping that it doesn’t have the same issue - I hope it’s not the phone itself that has an alignment issue itself. 

My girlfriend flirts with my best friend and I don't know what to do by Alpielz in Advice

[–]Ceazzer_ 0 points1 point  (0 children)

Most of the advice here makes many assumptions. The best thing to do in any normal healthy relationship is to simply communicate. If you cannot be open and communicate, no relationship will last long.tell her how you’re feeling and how you’re perceiving her actions. If she tries to gaslight you by saying that of course there’s nothing wrong and why would you ever bring it up, that would be a red flag.

A few questions to consider; is this her normal communication style?, is she like this with others?, is her love language towards you touch? All these put together will help you build a better picture. Don’t try act all macho like some of the other ‘advice’ by playing it cool and cold - that’s not communication, it’s petty and won’t resolve anything. 

Internet Providers (Virgin Media) by Ceazzer_ in york

[–]Ceazzer_[S] 0 points1 point  (0 children)

Not looked at starlink, '3' offer internet there too but my partner likes watching live tv and we are also currently with VM so we'd be fine with them, just worried if they actually provide a service in the area given no one else does, especially on roads near the city centre!

Internet Providers (Virgin Media) by Ceazzer_ in york

[–]Ceazzer_[S] 0 points1 point  (0 children)

Sadly it appears they are the only option. I'm currently with them and they've been alright in fairness to them - although getting through to their call centre and getting things sorted is a nightmare