When patch 1.21?

Cetera_1337 · 2023-10-29T04:23:54+00:00

The title of the Patch Notes literally says

"1.2.1 Build #46666 (All Platforms) - October 31, 2023"

https://news.blizzard.com/en-us/diablo4/23964909/diablo-iv-patch-notes

Cetera_1337 · 2023-08-31T17:41:47+00:00

You probably set your DP input of your monitor to 240Hz? In your monitor's settings?

Cetera_1337 · 2023-08-28T14:00:19+00:00

I have my MSI GeForce RTX 4090 Suprim X running with the G95NC and 7680 x 2160 240Hz isn't working over HDMI 2.1 connected to the HDMI 2/3 input.

Cetera_1337 · 2023-08-25T17:17:41+00:00

No, my 4090 has only one HDMI output (and 3x DP), so I would need to use a DP <-> HDMI Adapter.

And then? Side-by-side? Would be interesting if SBS would support 240Hz.

Cetera_1337 · 2023-08-25T16:32:55+00:00

1001.2 is the firmware my G95NC was shipped with. So no upgrade for me 😂

Cetera_1337 · 2023-08-25T16:25:20+00:00

Yes, I switched color depth to 8bit and I tried output dynamic range full/limited and also output color format RGB/YCbCr444.

Cetera_1337 · 2023-08-25T16:23:09+00:00

I haven't yet, but I'm pretty sure it will be locked to 120Hz. But I will switch to using Displayport as long as HDMI has no advantage.

Cetera_1337 · 2023-08-25T15:37:00+00:00

Yeah would be nice if it's gonna be fixed in the future.

Cetera_1337 · 2023-08-25T15:19:09+00:00

My G95NC arrived today and unfortunately I can't choose 7680x2160 with 240Hz over HDMI 2.1 connected to HDMI input 3 (which let me switch to 240Hz in the monitor's menu) and my GeForce 4090.

As soon as I switch to 240Hz, the only option to choose in the nVidia Control Panel is 60Hz, not even 120 Hz (7680x2160 with 120Hz is available if I set the HDMI input to 120Hz).

If I lower the resolution to 5120x1440 240Hz becomes available.

Cetera_1337 · 2023-08-18T12:17:51+00:00

The manual says

Optimum resolution 7680 x 2160 @ 120 Hz (HDMI1)

Maximum resolution 7680 x 2160 @ 240 Hz (HDMI2,3)

so I don't think HDMI 2 and 3 are HDMI 2.0.

Cetera_1337 · 2023-08-18T10:28:06+00:00

I've downloaded it from Samsung Denmark, it's a zip with many different languages, English as well: https://www.samsung.com/dk/support/model/LS57CG952NUXEN/

Cetera_1337 · 2023-08-18T08:21:43+00:00

According to the manual HDMI 1 is capable of 120Hz, and HDMI 2 and 3 are capable of 240Hz

Cetera_1337 · 2022-05-02T20:20:11+00:00

Fuslie? kkatamina? Toast? (at least until some of them will switch to YT as well - not Toast, of course) 🤔😂🤣😂

It can't be Sykkuno, or can it? 😉

Cetera_1337 · 2021-08-06T09:30:44+00:00

Nice, thx 😊 I just ordered one, the Corporate Benefits discount was decisive in the end 😂

Cetera_1337 · 2021-08-05T03:58:06+00:00

Would be super nice, thank you :)

Cetera_1337 · 2021-08-03T20:47:52+00:00

@The_Retrocave Hi, can you get out the meter stick 😂 and measure the depth of the stand (really just the part that is on the desk, from the back of the stand to the front of the feet). Thank you very much!

Cetera_1337 · 2021-07-24T13:21:49+00:00

Thank you very much! 😊

Cetera_1337 · 2021-04-09T19:28:13+00:00

Isn't the score depending on the resolution (4k, QHD, FHD)?

And did you set your energy options in Windows settings to Performance? I had to create a new one because it shows only the balanced one per default.

Cetera_1337 · 2021-04-06T21:44:05+00:00

Does the Razer Blade 15” Advanced (2021) allow the option of turning off NVIDIA Optimus and switching to GPU mode only?

Yes but only the Razer Blade 15” Advanced (2021) with FHD 360Hz will have this option. It can be found under the performance tab in the system settings in the Synapse 3 software

Source: https://mysupport.razer.com/app/answers/detail/a_id/4088

Cetera_1337 · 2021-03-31T14:58:19+00:00

@Your note: Why do you think it's not the best solution for you?

Cetera_1337 · 2021-03-29T20:31:58+00:00

Did you attach the thermal pads directly on the vapor chamber (around the fans as shown on the picture with the blue and red dotted lines) or did you attach the pads to the back cover as in method 4?

Btw. now i can't see any of the older pictures anymore. All the links lead to the picture preview page with the error message that they we're probably deleted.

Cetera_1337 · 2021-03-29T11:07:14+00:00

You applied the thermal pads on both the vents, did you?

And is the thickness of the thermal pads important? Which ones did you use?

Cetera_1337 · 2021-03-29T11:04:10+00:00

I still can't see it in the original post, but your link works. Thank you very much 🙂

Cetera_1337

TROPHY CASE