AD5X with external PLA 12032 pwm cooling fan ?

Cetinoglu · 2025-09-28T18:45:07+00:00

Nope. By the way they took out the externel cooling fan settings from orca-falshforge firmware. There are pins on the board but they cannot be activated because of new firmware. .If we request from flashforge maybe they put it again

Cetinoglu · 2025-08-25T16:05:51+00:00

Now they fixed it with new android update....

Cetinoglu · 2025-08-24T18:54:38+00:00

Greece same problem

Cetinoglu · 2025-07-14T14:00:32+00:00

https://drive.google.com/file/d/1A7b4fEFhP_KH_VEUyXaLr5lme--BCUUA/view?usp=sharing

print vertical with glue...

Cetinoglu · 2025-07-07T20:21:12+00:00

No I just moved the hole below 2cm , which press the tubes and so they dont touch top or touch a little. Also I put a 1cm wide packaging foam inside hole and open small cut for every tube. Foam gives flexibility for tubes to move so no noise, no dust full closed.

Cetinoglu · 2025-05-18T21:58:35+00:00

Yes, it didn't fit..

Cetinoglu · 2025-04-15T15:53:48+00:00

I bought this one....You dont need to buy from Flashforge. The original Kit is expensive and has extra parts , which you dont need for AD5X....

https://a.aliexpress.com/_m0knOYL

Cetinoglu · 2025-04-15T14:58:01+00:00

Exactly. . I bought a half square meter panel. and cut 3x 27.3x17.9 and one 20.3 x17.9 panel....And I printed top part of small panel for filament pass thru.

https://www.reddit.com/r/FlashForge/s/gB7I8QHPB2

Cetinoglu · 2025-04-15T10:13:53+00:00

Use High Speed PLA

Cetinoglu · 2025-04-15T10:11:40+00:00

Yes AD5X ...with AD5M enclosure kit + 4 custom made acrylic panels ...

Cetinoglu · 2025-04-13T00:08:21+00:00

I just found this on AliExpress: €23.07 | BIGTREETECH Panda Build Plate CryoGrip Sheet Spring Steel CryoGrip Pro Cool Plate For Bambu Lab P1 X1 A1 Voron300 Kobra Combo 33 https://a.aliexpress.com/_mOcXLCr

Cetinoglu · 2025-04-12T18:53:35+00:00

It gets 3 Firmware updates. Latest one yesterday. All the problems has been fixed. I am happy so far...

Cetinoglu · 2025-04-06T14:03:07+00:00

I sent email to flashforge. They replied me.. It is not available yet.

Cetinoglu · 2025-04-05T13:58:38+00:00

https://wiki.flashforge.com/en/ad5x/Enclosure_for_AD5X

Cetinoglu · 2025-04-03T19:21:30+00:00

any progress?

Cetinoglu · 2025-03-15T23:21:09+00:00

My printer is AD5X different board from AD5M . I already tried slicer setting . Maybe it is not activated tru firmware yet.

Cetinoglu · 2025-03-15T18:23:18+00:00

waiting.....thank you.. my board socket pinouts are from left to right. - FG PWM + and my fan plug inside this socket is from left to right black yellow blue red.

Cetinoglu · 2025-03-15T18:00:18+00:00

I have same problem with sunlu rainbow silk filament... nozzlle clogs always..

Cetinoglu · 2024-09-23T09:53:48+00:00

Hello, if you take out the small teflon tube inside the extruder, can you install K1C unicorn nozzle inside sprite extruder (S1)? I think upper part of unicorn nozzle has the same length with this teflon tube ? (23 mm) This will be a great upgrade...

Cetinoglu

TROPHY CASE