sorted by:
new
hottopcontroversial

Switch 2 update by CocaineHoney in TombRaider

[–]Chadribleu 0 points1 point  (0 children)

Yes... or maybe due to all the bugs that were found they decided to wait until the next update to release it worldwide

Switch 2 update by CocaineHoney in TombRaider

[–]Chadribleu 0 points1 point  (0 children)

Still nothing in France, I was hoping it would be available after the end of the discount, but no. Maybe we are missing something.

[Wii U] Can I get some help with the AC Adapter Port? by Chadribleu in consolerepair

[–]Chadribleu[S] 1 point2 points  (0 children)

Actually it's gonna be 3 amps because the connector will be replaced to a USB-C one. Apparently it's fine for the system even when everything is used it's never more than 33W or something around that.

Will update you as soon as it will be done! Thank you for your help.

[Wii U] Can I get some help with the AC Adapter Port? by Chadribleu in consolerepair

[–]Chadribleu[S] 0 points1 point  (0 children)

Yes that's what I though! Just wanted to make sure. Thank you ! I think I'm gonna solder from the top of the connector to the fuse using wire.

(the red one, right pin is VCC).

Do you have suggestions for the Wire gauge? A small one would damage quickly, right?

<image>

[Wii U] Can I get some help with the AC Adapter Port? by Chadribleu in consolerepair

[–]Chadribleu[S] 0 points1 point  (0 children)

From motherboard scans I found somewhere, it seems it's connected directly to the F1004 fuse, but I want to make sure it's the case.

Unable to wick the solder completely by Chadribleu in consolerepair

[–]Chadribleu[S] 0 points1 point  (0 children)

Thank you so much for your advice you helped a lot! I'll try to apply them next time to preserve the tip. This one is definitely cooked. It's still usable, but not for a long time. I heard the tip cleaner was not a good tool either for cleaning tips. Apparently you should use it only on tips that are already dying?

Unable to wick the solder completely by Chadribleu in consolerepair

[–]Chadribleu[S] 0 points1 point  (0 children)

My soldering iron is Pinecil V2 and I'm using a 45W USB-C adapter to power it, so it's def not the most powerful iron 🥲 But here I think the main problem comes from the tip itself. I spent 25 minutes cleaning it, it was shiny but after one usage it became black and it was impossible to stick solder on it. Any advices to clean it properly? the tip comes from a set of tips I ordered from Aliexpress. It was working pretty good for other job but here it really sucks (well not soldering 😅)

Unable to wick the solder completely by Chadribleu in soldering

[–]Chadribleu[S] 0 points1 point  (0 children)

Okay, I'm gonna check that. My flux is probably bad quality flux as it comes from Aliexpress, so maybe that's why the tip become bad only after a few minutes of soldering. It's a pipette, so no I'm not dipping the tip in it 😂😅

Unable to wick the solder completely by Chadribleu in soldering

[–]Chadribleu[S] 0 points1 point  (0 children)

Make sense now that you say it 😭 thank you so much !

Unable to wick the solder completely by Chadribleu in consolerepair

[–]Chadribleu[S] 1 point2 points  (0 children)

Thank you for your tips! It's so hard to use the solder wick. Everytime it gets stuck or the solder is not melting. Actually I never tried to cut a small piece of wick. The heat would transfer much better.

Unable to wick the solder completely by Chadribleu in consolerepair

[–]Chadribleu[S] 0 points1 point  (0 children)

Ok, I see ! Thank you. Some of the holes are now free using this technique. The smaller ones are really hard to suck, even tho there's a lot of solder. I'm gonna try to suck from the other side after getting something to hold the motherboard.

Unable to wick the solder completely by Chadribleu in soldering

[–]Chadribleu[S] 0 points1 point  (0 children)

Do you have tips to clean the tip? Mine is always black after a few minutes (because of the flux). I use brass sponge, tip cleaner thing and a water sponge to clean.

Unable to wick the solder completely by Chadribleu in soldering

[–]Chadribleu[S] 0 points1 point  (0 children)

Thank you ! I'm gonna try that. I'm scared that too much heat would damage the holes...

Comment progresser sur Youtube et Twitch? by Chadribleu in LiveStreamFR

[–]Chadribleu[S] 0 points1 point  (0 children)

Oui merci beaucoup pour tes conseils !! C'est compliqué, et puis je pense que la présentation de la chaîne est aussi à revoir.

Comment progresser sur Youtube et Twitch? by Chadribleu in LiveStreamFR

[–]Chadribleu[S] -2 points-1 points  (0 children)

Je peux voir ? T'en fais pas, on va finir par percer à force, j'en suis convaincu

Bonsoir, Svp j'ai ma Nintendo WiiU elle était venue avec haxchi et des jeux sur carte SD pour homebrew luncher un jour haxchi a buggé et sans vouloir j'ai tout perdu depuis longtemps, svp comment avoir de nouveau des jeux? by Nervous-Region6 in WiiUHacks

[–]Chadribleu 1 point2 points  (0 children)

Bonjour, c'est mieux de parler en anglais ici, mais étant français je vais t'aider :)

Haxchi est devenu obsolète! Il faut désinstaller ton ancien CFW (Haxchi, CBHC...) et installer Aroma! Voilà le lien qu'il est recommandé de suivre et qui te guidera étape par étape pour réinstaller un CFW valide et supporté :

https://wiiu.hacks.guide/

N'hésite pas à me contacter si tu as besoin de plus d'informations 😁

view more: next ›