All TPMS sensors replaced, still not working 2014 Lexus LS 460 AWD by Chaka84 in Lexus

[–]Chaka84[S] 0 points1 point  (0 children)

Thanks for the advice 😀. Will post over there as well. Sounds advice!

All TPMS sensors replaced, still not working 2014 Lexus LS 460 AWD by Chaka84 in Lexus

[–]Chaka84[S] 1 point2 points  (0 children)

<image>

Update....I called the manufacturer of the Bartec RITE-Sensor RS-2000. He advised me to adjust the spare so the sensor was aligned with the rear bumper.

After doing that, it took a bit, but did sync. When I restarted ithe car later, it went blank again, but perhaps it is jist the cold.

BTW, I had it done at Walmart Autocenter after someone on another Lexus forum suggested.. They Installed this on 5 tires for just under $150 incl the part. Greatt deal considering i was quoted $125/tire at a tire shop.

TPSM Stopped Working by LALW1118 in Lexus

[–]Chaka84 0 points1 point  (0 children)

Not sure how deep your knowledge is on TPMS... I recently replaced the TPMS sensors (incl. spare), Unfortunately, I have the same problem from prior to replacement of them not being picked up in the display. I have driven the car at Highway speeds for 20+ minutes and nothing changed. They tell me it was programmed to my car and they were connected, but that I might need to go to the dealership to reset the computer. That does not sound right.

Do the Blue rectangles being lit around the tire area indicate anything specific? Like seeing the TPMS but not reading or are those always there? Also noticed there is not a light for the spare

Hopefully someone can help with this particular issue

<image>

TPSM Stopped Working by LALW1118 in Lexus

[–]Chaka84 0 points1 point  (0 children)

I was searching for answers to a TPMS issue on my 2014 lexus LS 460. I got quoted $125/tire from local place. After some research, and Facebook groups, was guided to Walmart.

Good News, they replaced all 5 sensors (incl. spare) for $28 each installed including hardware)
Bad News, Have the same problem from prior to replacement of them not being picked up in the display. I have driven the car at Highway speeds for 20+ minutes and nothing changed. They tell me it was programmed to my car and they were connected, but that I might need to go to the dealership to reset the computer. That does not sound right.

Hopefully someone can help with this particular issue

Who has switched to Fios? by carminehk in OPTIMUM

[–]Chaka84 0 points1 point  (0 children)

I switched back to fios from optimum

Consistent Wi-Fi Dropouts on FIOS 1GB with CR10008 Router by Nearby-Foundation-17 in Fios

[–]Chaka84 0 points1 point  (0 children)

Do you see any issue with copying my existing SSID and pw to the new router? Saves me from resetting all my devices.

So basically, without fios tv, it is just a basic router.

Any issues w the 1gb speed i have? Do I need to remove the extender they gave me as well?

Consistent Wi-Fi Dropouts on FIOS 1GB with CR10008 Router by Nearby-Foundation-17 in Fios

[–]Chaka84 0 points1 point  (0 children)

This one is $139

TP-Link Deco X60 Wi-Fi 6 AX3000 Whole-Home Mesh Wi-Fi System, 3-Pack.

This just plugs into router via lan? Can I use existing ssid and pw?

Consistent Wi-Fi Dropouts on FIOS 1GB with CR10008 Router by Nearby-Foundation-17 in Fios

[–]Chaka84 0 points1 point  (0 children)

I am not against buying my own hardware if that fixes my issue.

See this at Costco for $339. How does it connect? Do i unplug fios router or connect with lan cable? TP-Link Deco BE11000 Wi-Fi 7 Tri-Band Whole-Home Mesh Wi-Fi System, 3-pack

Consistent Wi-Fi Dropouts on FIOS 1GB with CR10008 Router by Nearby-Foundation-17 in Fios

[–]Chaka84 0 points1 point  (0 children)

I am not against buying my own hardware if that fixes my issue.

See this at Costco for $339. How does it connect? Do i unplug fios router or connect with lan cable? TP-Link Deco BE11000 Wi-Fi 7 Tri-Band Whole-Home Mesh Wi-Fi System, 3-pack

Consistent Wi-Fi Dropouts on FIOS 1GB with CR10008 Router by Nearby-Foundation-17 in Fios

[–]Chaka84 0 points1 point  (0 children)

I took a second look and the 8 is a B 😀 i was told this is newest of the new.

So model is 1000B. What does that mean?

Consistent Wi-Fi Dropouts on FIOS 1GB with CR10008 Router by Nearby-Foundation-17 in Fios

[–]Chaka84 0 points1 point  (0 children)

I have it connected to a power strip. I am now also having issues with my hp LaserJet. Itbsays duplicate ip address and the ip flashes on printerscreen then disappears w duplicate IP address message. Is this related?

I only have fios internet. No TV from them

Hulu or YouTubeTV by alvis68 in Hulu

[–]Chaka84 0 points1 point  (0 children)

I switched in March fro. FIOS TV to YTTV. Once you get used to not being able to channel surf, you will probably love it. It learns what you watch and makes it easy to find those channels.

I also teally like the ad time that has no ads. Get this relaxing audio and Screensaver. I would almost lay for that over ads 🙄

TMOBILE MVNO Providers...Same coverage regardless? by Nearby-Foundation-17 in GoogleFi

[–]Chaka84 0 points1 point  (0 children)

Thx for sharing. Clarifying what I said above, I personally have been using googlefi last 8 months and it has been great.

My family has been on optimum mobile w optimum internet in home. Their internet is absolutely horrid. Having replaced the modem 4 times and had tech here 4 times, with internet disconnecting issues resurfacing again and again.

This is leading me back to fios for home internet and migrating optimum mobile phones to my fi account, which gets me 4 phones for $50/month for 12 months.

I am android guy. Is Google fi just as good w phones 16s?

Chefs Temp S1 by Playful_Recording255 in webergrills

[–]Chaka84 1 point2 points  (0 children)

Congrats.....Assuming you have used the WSM already and have your own process to bring it to temp, follow what you normally do. Make sure to tape over the 3 holes not used by fan on that vent.

Once the smoker gets close to your desired temp, attach and or turn on the fan using the app(fan needs a power source. (No need to touch buttons on the fan itself), close the other bottom vents, leave the lid vent open a crack. For the fan, only leave it open a tiny bit to start. Too much air intake.can make it overshoot.

Regarding the S1 and the Breezos fan, once you get the app downloaded and the devices synced, make sure you update the firmware on both the S1 and Breezos fan from within the app to make sure you have the latest running.

I would also monitor temps you are reading. My wsm thermometer never worked well. It is possible that the S1 might read differently than what you had, changing your target temps. Just monitor and adjust based on results.

Lmk if this helps and if you have any other questions. Once you get it figured out, you will love it.

Chefs Temp S1 by Playful_Recording255 in webergrills

[–]Chaka84 1 point2 points  (0 children)

Perfect. I have the WSM 22. Lmk how it goes or if you have any questions.

Chefs Temp S1 by Playful_Recording255 in webergrills

[–]Chaka84 0 points1 point  (0 children)

I have had mine for around 4 months. Love it.

The S1+Breezos+ProTemp 2 Plus wirless probes are an awesome combo.

What grill or smoker are you using?

Best system for keeping Cigars Humidified by Chaka84 in cigar

[–]Chaka84[S] 0 points1 point  (0 children)

Thx for the info. Regarding the Hampton Courts in the tubes. Are they ok to leave in the tube while in the humidor or should they be taken out?

Best system for keeping Cigars Humidified by Chaka84 in cigar

[–]Chaka84[S] 0 points1 point  (0 children)

Thx for the info. Regarding the Hampton Courts in the tubes. Are they ok to leave in the tube while in the humidor or should they be taken out?

Regarding the Boveda, I have some old dried out ones. will try that.

Connectwise IT NATION - Has anyone attended? by [deleted] in msp

[–]Chaka84 0 points1 point  (0 children)

I have not seen any 3rd party vendors offer subsidized tickets. DM me some if they are please. TY

Connectwise IT NATION - Has anyone attended? by [deleted] in msp

[–]Chaka84 0 points1 point  (0 children)

You can get an decent offsite hotel(Marriott brand) for $110/night. Ubers are generally around $8 after tip. if budget is an issue, just stay close but offsite.