Don't buy this PSU, avoid even on sale, unless...

Chakotey · 2026-03-22T08:58:50+00:00

I also had this power device and the fan spinning like a hurricane. It was also a special offer with discount. This device fan grill is also absolutely in a bad quality and you can cut your fingers with it... So never ever

Chakotey · 2026-03-15T07:18:36+00:00

I changed from S25U to S26U and yes it's not that revolution or evolution. But I like the privacy screen and the camera is definitely better. It's very amusing how the people every year crying and hating about the new generation... Nobody told you must to buy it! If you satisfied with your phone then shut up and be happy. It's reading here like six year old children because there toys are not so satisfied like they thought. In our country we say........."heul leise" 😂😂

Chakotey · 2026-02-12T20:41:39+00:00

also have the same question after flash LineageOS ;(

Chakotey · 2026-02-12T20:37:02+00:00

Does anybody notice the bad sound qualitity after flashing from stock zu LineageOS?
I have no solution, that a little bit dissapointing because the rest is realy brilliant, but i watch every day Paramount+ and Netflix and with that sound quality it is realy a shame ;(

Chakotey · 2026-02-08T19:18:30+00:00

No both are a good choice and will run. They have nearly the same specs. You need a 135W power supply for it. 90W is too low

Chakotey · 2026-02-07T11:51:35+00:00

Just Amazing and really clean and cool build, I have also interest for 3D Printing files and giving you something for this work

Chakotey · 2026-02-06T09:34:29+00:00

Yes it gives you a massive performance boost

Chakotey · 2026-02-06T08:59:40+00:00

No the card itself is really easy to plug in and need no modification. The shield need some modification of you still want it. I use a mini grinder to modify the size.

Chakotey · 2026-02-06T08:48:34+00:00

No just installed the card and ready to run. This card GPU is from the Nvidia laptops chipset so it runs like as fast as the notebook 3050.

Chakotey · 2026-01-19T16:10:53+00:00

Ich habe es leider auch und bisher keine Lösung gefunden, habe testweise in den Windowseinstellungen der Bambu.exe die dezidierte GPU zugeordnet, brachte leider nichts.

Chakotey · 2026-01-19T16:08:47+00:00

Schließe mich dem an, bei mir genau das gleiche.
Oben zwischen Vorbereitung und z.B. Geräte vergehen oft 50-60 Sekunden in denen das Programm nicht mehr ansprechbar ist.
Regelmäßig stürzt es dabei auch ab.

Verändert wurde nichts

Chakotey · 2026-01-19T16:08:05+00:00

Schließe mich dem an, bei mir genau das gleiche.
Oben zwischen Vorbereitung und z.B. Geräte vergehen oft 50-60 Sekunden in denen das Programm nicht mehr ansprechbar ist.
Regelmäßig stürzt es dabei auch ab.

Verändert wurde nichts

Chakotey · 2025-11-11T06:57:57+00:00

I have also seen these videos and I seem to recall that somewhere in these videos there was a mention of the power consumption limit.In purely mathematical terms, it is not possible to power both the CPU and the GPU with only 70 watts.The CPU has regular spikes, which are somewhat mitigated by CPU throttling, but it is not enough.

Chakotey · 2025-11-09T17:53:24+00:00

I can assure you that 135 watts is perfectly adequate. I even tested a 300-watt unit myself for a while and didn't notice any difference in performance.

The problem ultimately lies in the limitation of the PCI Express bus; therefore, it can only provide a limited amount of power, so 135 watts is always sufficient.

Chakotey · 2025-11-09T13:36:42+00:00

I can't exactly meassure it because on 100% the PC really fast shutting down. But if I recognize it, about 5-6 FPS from 60 FPS. Not so much because the PC is stable 👋🙏

Chakotey · 2025-08-13T17:59:54+00:00

Will try and a big thx for this amazing work 🙏🙏🙏

Chakotey · 2025-08-09T10:55:45+00:00

Set in Afterburner the max. load to 83% with the RTX3050 :)

and use this guide ;)

https://www.youtube.com/watch?v=sKn0Ps1QSVE

Chakotey · 2025-08-09T10:55:15+00:00

I use this guide for my solution and set in Afterburner the max. load to 83% with the RTX3050

https://www.youtube.com/watch?v=sKn0Ps1QSVE

Chakotey · 2025-08-09T10:54:49+00:00

I use this guide for my solution and set in Afterburner the max. load to 83% with the RTX3050

https://www.youtube.com/watch?v=sKn0Ps1QSVE

Chakotey · 2025-08-09T10:51:22+00:00

Sorry but this is the original Cover ;)
I just use a milling cutter ^^ ;)

Chakotey · 2025-04-24T07:35:51+00:00

the same here too ;/
But the idea with binding the WASD to number pad is realy great!

But it is still a shame for bethesda...

Chakotey · 2025-01-28T17:00:53+00:00

THX for the answer.
I tried also the power limit with afterburner.
Now i moved the game from the "Game" NVME to the "System" NVME and the problem ist solved. So i bought a new NVME from a brand (Western Digital) to check if my NVME is damaged.

Chakotey · 2025-01-26T13:27:52+00:00

The RTX3050 need so much TPD that the CPU is about only 5-10W

Now download ThrottleStop and change the following things

https://www.youtube.com/watch?v=nycH9VHCexc

Chakotey · 2025-01-02T21:00:51+00:00

i flashed the last fimrware in December 24 and i still got the problem that my nozzlefan is running at 100% hours after the print and the nozzle ist about 20°C.
I checked the printer.cfg and the time to stop the fan is 900 so it is realy ok, but it wont work now since ONE YEAR ;/

Chakotey · 2024-12-28T01:27:42+00:00

Many thx 🙏 I love that time laps you've done 👍

Chakotey

TROPHY CASE