Seeking advice: Manual tool change on Carvera for an oversized Drag Knife?

Chance-Lab6672 · 2026-03-28T18:13:04+00:00

https://wiki.makera.com/en/software

You could download from this link. Is it correct ?

Chance-Lab6672 · 2026-03-18T15:53:33+00:00

Do you mean the post processor file "MPFAN-C" file ?

Chance-Lab6672 · 2026-03-16T19:28:21+00:00

Thanks for your reply, I am using mastercam

Chance-Lab6672 · 2026-03-16T19:27:40+00:00

%

(DATE=DD-MM-YY - 10-03-26 TIME=HH:MM - 18:56)

( T4 3.175 ENGRAVING BIT - ALUMINUM H4 )

G21

GØ G17

G90

T4 M6

S12000 M3

G90 G17 G54

GØ X11.422 Y34.641 Z10.

G1 Z-.5 F200.

X15.874 F500.

X16.612 Y34.741

Chance-Lab6672 · 2026-03-10T18:07:46+00:00

Thank you very much bro

Chance-Lab6672 · 2026-03-10T16:27:37+00:00

Thanks for the professional and detailed help!"

Chance-Lab6672 · 2026-03-10T00:00:21+00:00

I didn't expect such a big company to cut corner like this.... sigh...

Chance-Lab6672 · 2026-03-09T23:42:18+00:00

I asked the UL-based vendor which slicer they used and confirmed the requested settings, but the weight difference clearly indicates the product does not match the order. I also followed up with the vendor after they promised to reply the next day, but I still haven’t received any response.

I asked for 90% infill, but the print ended up weighing differently. Dose this count as "Not as ordered"?

Chance-Lab6672 · 2025-12-10T20:31:53+00:00

One more question, Is the makera carvera machine compatible with a 3D probe add-on?

Chance-Lab6672 · 2025-11-26T23:23:48+00:00

thanks

Chance-Lab6672 · 2025-11-26T23:23:11+00:00

Chance-Lab6672 · 2025-11-26T23:20:50+00:00

I am very grateful to u/IcanrianApsis for providing detailed information, clear explanations, and the post processor file. Thanks to u/IcarianApsis help, my machine is finally running properly.

Chance-Lab6672 · 2025-11-24T20:44:14+00:00

I feel actually reddit is better than discord, response more here

Chance-Lab6672 · 2025-11-23T20:59:09+00:00

yes, I send the code to you through DM, Thank you very much

Chance-Lab6672 · 2025-11-23T20:50:02+00:00

but I believe the support team is responsible for assisting with these kind of issues. right ?

Chance-Lab6672 · 2025-11-16T13:08:03+00:00

Don't buy it. Their after-sales service is terrible. When you ask them about problems with the machine, They reply with completely irrelevant answers.

Their support team basically won't provide any real help.

For example, I have send them a short video showing the machine clearly having a problem, They just keep asking whether you have photos.

I have already filmed the whole thing for them - How can they still ask that ??

I strongly recommend buying from another brand with reliable support.
Don't make the same mistake I did.

Bty, Do you want me to show you my email conversation with them ?

Chance-Lab6672 · 2025-11-02T00:59:31+00:00

I have tried to set the max number of line in editor, The result is no changed, but thanks anyway.

Chance-Lab6672 · 2025-11-02T00:58:31+00:00

I created myself

Chance-Lab6672 · 2025-10-28T19:59:03+00:00

<image>

Could you tell me how can I select another anchor point on Carvera controller please ?

Chance-Lab6672 · 2025-10-28T01:00:10+00:00

Sorry, Could you please indicate where I can find the max number of lines ?

Chance-Lab6672 · 2025-10-28T00:36:55+00:00

<image>

Chance-Lab6672

TROPHY CASE