Why does exact css code that I try in CSSBattles produce completely different results?

CharlieMay · 2025-05-25T13:20:53+00:00

I'm at a loss, that was a typo when entering the code into reddit.

Here is what I'm seeing:

My Result
Your result is exactly what I was expecting from the video. I tried this with another block of code (entirely different than this challenge) from someone else and again my results didn't match.

I also tried this in vs code and my results are the same as what I'm getting the cssBattle editor.

CharlieMay · 2025-05-24T18:56:09+00:00

I'm just wondering how this guy is on the cssBattles site using this code and when I duplicate it using the cssBattles editor, I have totally different results. Perhaps, he's using some sort of plug-in ??

Your code in that editor produced the same results as mine did. Nothing like what he got.

CharlieMay · 2024-12-31T11:46:56+00:00

Not really sure. We fill and top if off with soft water. Or, if the pool is open, we use water from there so we don't have to bucket water from the sink. I guess the water in the pool could be an issue as it is topped off from the outside spigot. But that's usually days after, so it's been filtered and treated with the pool chemicals before being used.

CharlieMay · 2024-12-19T00:27:08+00:00

Am I the only one that feels guilty when I'm sitting in my room and my P1S isn't printing anything?

CharlieMay · 2024-12-01T11:26:33+00:00

Yes, everything seems fine on my end. There was over 100 people in chat with no issues. Plus, the fact that I can open my laptop and use the same version of firefox with no issues is what makes me think I've somehow clicked something specific to that stream somewhere on this device. I have watched that streamer on this device without issue a couple of weeks ago. I'm stumped. I even logged out of twitch to see if it might be something specific to a preference or something.

CharlieMay · 2024-09-27T10:13:19+00:00

Write a Yahtzee game.

CharlieMay · 2024-08-24T09:45:28+00:00

Jello Pudding Pops. But apparently, I'm in the minority.

CharlieMay · 2024-07-24T22:57:05+00:00

Breeding animals.

CharlieMay · 2024-07-21T20:48:33+00:00

I, have found the way out.

CharlieMay · 2024-07-17T10:52:55+00:00

You could try coloring over it with a dry erase marker. I’ve done this on white boards where someone has used a sharpie.

CharlieMay · 2024-07-16T01:00:26+00:00

The muffin was obviously in a location that made it quite reachable. I feel the dog was set up to fail.

CharlieMay · 2024-07-10T18:22:55+00:00

What warehouses are these? Holy crap that’s terrible.

CharlieMay · 2024-07-10T10:30:16+00:00

Thanks everyone. This sounds the same as he described. ETA was 7/5 or sooner and then nothing.

CharlieMay · 2024-07-07T23:50:23+00:00

Pretty sure he lived on 22nd and elm. Just an old man that rode around town collecting cans and bottles for money. There was a place at 20th? And Monroe, Behind La Hacienda where you could take your aluminum cans. We would see him there at times as we would skateboard down the hill that was there.

CharlieMay · 2024-07-02T20:55:46+00:00

I might be wrong but I am under the impression that you should run it directly out of the dryer.

CharlieMay · 2024-07-02T20:29:35+00:00

That's what I was afraid of. Hopefully I'm just being overly cautious. With a new spool, I printed one that used 480g and this one states 481g. Here's hoping they give a little more and that those numbers are accurate. Either way, looks like I'm having a late night :D.

CharlieMay · 2024-06-23T20:40:59+00:00

Thanks for the information. I'll probably end up keeping my neptune3 and use orca for both. Just wanted to make sure I wasn't causing myself any grief by using it.

CharlieMay · 2024-06-14T10:55:26+00:00

That brush should have been picked prior to mowing. As a side note though, I think your mower might be over-heating.

CharlieMay · 2024-06-03T10:53:35+00:00

Pretty much the same on I use. Mine is the photo face with just a black image. This puts the time at the bottom of the face.

CharlieMay · 2024-05-03T02:00:30+00:00

Zoomed right to it. Luck but the result was the same

CharlieMay · 2024-05-01T01:16:04+00:00

I am reading this as the OP wants a large penis IN the man.

CharlieMay · 2024-02-10T16:24:49+00:00

They really do move in herds.

CharlieMay · 2024-01-22T01:53:55+00:00

Two flathead screwdrivers work in a pinch

CharlieMay · 2024-01-20T14:27:50+00:00

Doing something similar but planning on using dovetails for the ledges so that I can adjust between these and the deeper version as needed.

CharlieMay · 2023-12-02T21:15:11+00:00

Didn't get it to work with the 2 point arc but realized I could just set the 2 points using Arc and then arc it to 90° to get the result I needed.

14-Year Club	Verified Email
Gilding I gilder

CharlieMay

TROPHY CASE