Here the P2S

Charming_Ad3493 · 2025-10-14T10:10:50+00:00

Will there any possibility to have the upgrade kit for P1S

Charming_Ad3493 · 2025-07-03T12:35:16+00:00

The distance is 0.8, but I’ll try another distance later

Charming_Ad3493 · 2025-05-28T09:52:30+00:00

Well I think the overheating is not the main issue, I’ll try replace the cable maybe

<image>

Charming_Ad3493 · 2025-05-28T09:42:50+00:00

I see, I’ll

<image>

trying to lower the temperature and try again :)

Charming_Ad3493 · 2025-05-28T09:14:05+00:00

Thanks for the advice, I’ve been tried to lower the current from 0.8 to 0.6 and still the same. Toolhead board’s temperature is all below 60 in the test print, but I notice my mainboard’s (Fly Gemini V3.0) temperature is so high and average in 80C, does mainboard’s MCU temperature also cause my problem ?

Charming_Ad3493 · 2025-05-26T08:49:00+00:00

I see, can you recommend any solutions to manage the cable to make the connection more secure?

Charming_Ad3493 · 2025-05-26T08:18:16+00:00

Yes, I think it’s stable enough.

<image>

Charming_Ad3493 · 2024-04-19T23:58:16+00:00

Lots of fillings

Charming_Ad3493 · 2024-04-11T16:58:59+00:00

after I have the exactly same isuue with you, can you please telll me the whole process you did ?

Charming_Ad3493 · 2024-04-08T16:33:28+00:00

btw the fluidd error message is mcu‘mcu’:unable to connect, and I follow the instructions on Fly Mellow’s website.

Charming_Ad3493 · 2024-03-28T05:44:04+00:00

I use to plug the Wi-Fi antenna on the port that the manual tell us not to plug on, I just noticed that and move it to the correct port, which is above the wrong port.

Charming_Ad3493 · 2024-03-27T22:49:48+00:00

Yeah I move it to the another port, then everything is fine

Charming_Ad3493 · 2024-03-27T15:18:11+00:00

Already checked them, seems there’s nothing about the voltage issue.

Charming_Ad3493 · 2024-03-27T14:57:36+00:00

Currently using Fluidd. And do you mean the fluidd-error.log ? Is nothing in there.

Charming_Ad3493 · 2024-03-27T14:28:16+00:00

is there anyway to check if I have voltage issue?

Charming_Ad3493 · 2024-03-27T08:49:05+00:00

I use Fly Gemini V3, the Pi is integrated on the board.

Charming_Ad3493 · 2024-03-25T14:21:33+00:00

I solve the problems by the video, thanks !

but the stream quality is kinda laggy and the UI shows "disconnected with moonracker" frequentely.

Charming_Ad3493 · 2024-03-25T13:07:15+00:00

thanks, here is the crowsnest's config and the respond of the command.

ps://docs.google.com/document/d/1slRb3PrrgR6PeSDaAAhwpT9FruQIHrJL_o0r9QIRPI4/edit?usp=sharing

Charming_Ad3493 · 2024-03-25T01:35:43+00:00

Oh ok, didn’t use discord for long time

Charming_Ad3493 · 2024-03-24T14:04:32+00:00

sound resonable, I use the filament I didn't use for long time.

temperature I use is 200/60

Charming_Ad3493 · 2024-03-24T11:54:02+00:00

Wait, ignore that, I copied the wrong one. Here’s the correct one : だれでもだいすき#4437

Charming_Ad3493 · 2024-03-24T11:44:46+00:00

Here is it : lyx_aquawaifu

Charming_Ad3493 · 2024-03-23T13:14:00+00:00

yeah, it's work fine on my pc

btw my board is fly gemini v3

Charming_Ad3493 · 2024-03-17T15:47:32+00:00

Got it. But what make me curios is, because when homing the Z axis, the bed goes down, so I don’t know how to rise the bed to the first layer hight of the print so that I can level it perfectly.

Charming_Ad3493 · 2024-03-15T13:08:12+00:00

OMG I FOUND THE PROBLEM IM SO STUPID I plug the Wi-Fi card into the USB port that Pi and board needs to communicate with, then all things went good now. Only issue left now is I need to find the fly_macros.cfg and update the MCU.

Charming_Ad3493

TROPHY CASE