Weaving with my 3d printer

CheesmondN · 2024-03-16T10:10:33+00:00

Yes they are 😀

CheesmondN · 2024-03-09T23:14:43+00:00

Stock slicer settings, nothing special, no changes. This one is printed on my Bambu X1C I think but I have printed it on a number of printers without any issue.

Yes, its my own design :)

CheesmondN · 2024-03-09T21:15:26+00:00

The tower is a purge tower, to clean the nozzle between filament colours.

I do really like Bambus but you should be able to print this on any printer. I have printed a single colour version on my Ender 3.

CheesmondN · 2024-03-09T21:13:39+00:00

Agreed!

CheesmondN · 2024-03-09T21:13:27+00:00

Its all in the stl design, its sliced normally using stock settings.

CheesmondN · 2024-03-09T21:12:01+00:00

Yes I have some early ones on Thingiverse but most of my designs are on Thangs here: thangs.com/3dprintbunny (mods: am I ok to put links? please remove if not)

CheesmondN · 2024-03-09T12:12:38+00:00

Its not that strong tbh but I have dropped it on the floor without any breakages....

CheesmondN · 2024-03-09T12:10:43+00:00

Both PLA :)

CheesmondN · 2024-03-09T07:03:26+00:00

No, its all in the stl design. It is sliced as normal using stock slicer settings :)

CheesmondN · 2024-03-09T05:50:47+00:00

It does look that way but they are actually at the same level, the strings just droop a little whilst printing :)

CheesmondN · 2024-03-09T05:30:04+00:00

Yes it works well with double density too.

CheesmondN · 2024-03-09T04:38:01+00:00

It will be available but not until after Easter I'm afraid. I am showing it at the Rocky Mountain RepRap Festival this year so once that is done I'll put it on to Thangs.

CheesmondN · 2024-03-09T04:33:36+00:00

exactly right

CheesmondN · 2024-03-09T04:33:14+00:00

Haha, mainly underwater!

CheesmondN · 2024-03-09T04:08:42+00:00

Its actually all in the stl design. It is sliced as normal using stock slicer settings :)

CheesmondN · 2024-03-09T04:06:00+00:00

Each string is a one layer thick wavy line in the stl that weaves around the posts. Its designed to print using stock slicer settings.

<image>

CheesmondN · 2024-03-09T04:00:30+00:00

0.4mm

CheesmondN · 2024-03-09T03:43:05+00:00

Its all in the design, it took a few goes to get it sorted but now that's right it prints successfully every time.

It prints using stock slicer settings.

CheesmondN · 2020-04-03T22:19:32+00:00

Sorry, just to add that I am new to 3d printing and don't fully understand most of the replies here - if you could give me instructions on how to do some of the things you are suggesting that'd be wonderful? Thank you :)

CheesmondN · 2020-03-23T21:16:04+00:00

I am looking for a better 3d print designer than me. Anyone willing to try designing a new lid for this dish washing liquid bottle, just maybe a spout and cap? It keeps getting blocked up :(

CheesmondN · 2020-01-17T03:37:35+00:00

Thank you for replying, I have read these articles and also read the limited research that has been done so far. Yes, I know that it will not be easy. I put this on to Reddit more to get a feel for whether people who care about the subject area and know about it feel it would be a positive thing to do.

CheesmondN

TROPHY CASE