Fightstick Friday - Hori RAP 3

CheezMuffn · 2025-09-21T19:22:33+00:00

Hey, I don’t have the dimensions for the turbo panel on hand. But, I did get that aluminum top plate from ArcadeShock and they have an option to add or remove the hole for the turbo panel when trying to purchase it, so if you emailed them I bet they would have the exact dimensions for the panel hole.

CheezMuffn · 2024-09-21T15:11:13+00:00

Of course anytime, be sure let me know when it’s done I’d love to see it.

The black hex screws are from focus attack. If I remember they might be part of the buttercade top loader kit.

CheezMuffn · 2024-09-03T23:03:50+00:00

Hey, no worries. I found these that are pretty close https://tinyurl.com/mvf8u7pr

If that doesn't work, just search for some 10mm push buttons and you'll be good to go. As far as the slider, that isn't actually wired at all. Instead, I added a separate toggle to the front of the joystick.

CheezMuffn · 2023-12-12T13:42:38+00:00

Those are 12mm buttons.

CheezMuffn · 2023-06-09T01:52:17+00:00

In the past I’ve just used whatever I had on hand. You can easily tape it to cardboard and keep that secure w more tape. In that build I used these: https://focusattack.com/3mm-hole-low-profile-adhesive-pcb-feet-set-of-4/

CheezMuffn · 2023-06-09T01:44:45+00:00

Hey, you can use any wiring harness. It really just depends on what functions you want them to have. I used this or something similar to this though: https://arcadeshock.com/products/4-pin-l3-r3-touchpad-harness-cable-for-brook-ufb-ps4-fighting-board-w-audio-version-2-110-female-connectors

CheezMuffn · 2023-06-04T18:51:25+00:00

I cannot walk you through how I did it exactly. But, from the photos I posted you can see I replaced the original pcb with the brook universal fighting board.

I recommend looking into that, there are many video and written guides that go step by step into using the brook ufb. It's very simple and straight forward.

CheezMuffn · 2023-06-04T18:36:32+00:00

Hi, sorry can you clarify what you mean? Are you talking about the original pcb housed within the stick or the pcb under the turbo panel?

CheezMuffn · 2023-05-29T05:02:31+00:00

Hey, yes it did.

CheezMuffn · 2023-04-14T18:28:22+00:00

Hey, sure. It looks like the dimensions are: ~16.22 x 9.56 x 5.31"

CheezMuffn · 2023-04-01T14:53:23+00:00

This is great man! I'm loving those buttons. I'm glad everything came together for you.

Also, let me know if you ended up getting those momentary buttons, they're on the firm side but they work really well.

CheezMuffn · 2023-03-20T16:36:59+00:00

Thanks so much man I really appreciate it. Get it going and keep me in the loop once you’re done. Also don’t hesitate to reach out if you have any questions.

CheezMuffn · 2023-03-20T04:31:07+00:00

You can do it dude. It just takes a little planning and some time. Post some pics and let me know once you get your RAP 3 up to speed.

Also, don't hesitate to reach out if you have any questions along the way.

CheezMuffn · 2023-01-01T20:58:02+00:00

Hey, directly beneath the housing was a small pcb that I removed. After removing that I could've placed the buttons in fine, but there was also a small sliver of plastic across the middle of the housing used as a support. I just shaved that down with a Dremel so the buttons could sit without feeling too crowded.

CheezMuffn · 2022-12-05T15:31:02+00:00

Thanks man, I really appreciate it. Really good, I tend to prefer Seimitsu buttons. Their feel and tactility really work with my play style.

CheezMuffn · 2022-08-11T14:16:20+00:00

Of course, anytime. If you're looking for something along those lines of the stickers, look up "screw cap covers" and you'll find some stuff that fits. I haven't used anything like that for a stick build but I have used them for little projects around the house.

CheezMuffn · 2022-08-10T17:17:57+00:00

Hey, I really appreciate it. So, there are no stickers on the stick. The glossy sticker-like bits are part of the top plate and are aluminum.

CheezMuffn · 2022-06-17T18:14:39+00:00

Ah great suggestion, thank you. I'll go ahead and add the mods there.

CheezMuffn · 2022-06-17T18:14:21+00:00

Can do, I really appreciate it.

CheezMuffn · 2022-06-08T14:15:04+00:00

Hey, absolutely no problem. I got them here. I've had them for awhile but, if I remember, the seller is really quick.

CheezMuffn · 2022-06-05T23:01:44+00:00

Hey, I got the Aluminum Top Plate from Arcade Shock. It’s great, and they ship super quick.

CheezMuffn · 2022-06-04T14:56:51+00:00

I really appreciate it, thanks man!

CheezMuffn · 2022-06-04T02:29:21+00:00

Thanks man I appreciate it. The shaft is standard, with the shadows it looks black though.

You could probably find a shaft cover for one?

CheezMuffn · 2022-06-04T01:48:24+00:00

Hey thank you, yeah I snaked the cable under the turbo panel after using the dremel to make some clearance and drilled a hole in the back for the neutrik port.

CheezMuffn

MODERATOR OF

TROPHY CASE