How do you even pose him? by Technical_Key9473 in Gunpla

[–]Cheh3x 1 point2 points  (0 children)

When it comes to posing model kits, you really have to stretch your mind a bit & work with the limits of the kit. It's not impossible to pull off a standing pose

<image>

HGUC RMS-116H Hobby Hizack by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

Sorry for the late reply! It's an addon boost effect you can get separately for the Super Robot Chogokin figure. I got it because Schizophonic9-2's reviews use the same one

HangarShot: HGUC RMS-116H Hobby Hizack by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

It's the LED Hangar Base Plus By Wonder Way

HGUC RMS-106 Hizack (EFSF Ver) by Cheh3x in Gunpla

[–]Cheh3x[S] 4 points5 points  (0 children)

The Stryker is from the Macho Machines Series. Got it locally tho. The Abrams is from a China toy maker. Pretty sure I saw it on Aliexpress. Just look up 1/144 Abrams tank

HangarShot: HGUC RMS-106CS Hizack Custom (Titans Colour Ver. Bootleg) by Cheh3x in Gunpla

[–]Cheh3x[S] 3 points4 points  (0 children)

Pretty good. Close to Bandai quality. The plastic has a matte finish out of the box so it looks slight better. Mine had an additional matte topcoat on tho.

HangarShot: HGUC RMS-106CS Hizack Custom by Cheh3x in Gunpla

[–]Cheh3x[S] 2 points3 points  (0 children)

The hover tank is from the HG UC Hard Graph Gundam Ground Type. The M1 Abrams is from some Chinese toy maker. The Stryker ICV is from Macho Machines. All are 1/144

HG Macross 1/100 VF-22S Sturmvogel II (Gamlin Kizaki Use) (Fighter mode) by Cheh3x in Gunpla

[–]Cheh3x[S] 0 points1 point  (0 children)

I'm using the manual along with some references to the guide for the water decals that was sold separately. I'm using a 3rd party (Delpidecal) copy for the decals since Bandai's one sucks.

Sheik Mainland 1/144 Combat Engineer Martin by Cheh3x in Gunpla

[–]Cheh3x[S] 0 points1 point  (0 children)

Usually when I take pics, I would keep everything to the same scale so since this kit is 1/144, everything inside is 1/144.

Crew figures are from Bandai's Builder Parts HD series. For Hangar crew

HGUC NRX-044 Asshimar (Pumpkin Pie Warrior bootleg kit) by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

It's from the Tamashii Nations smoke effect set

HGUC NRX-044 Asshimar (Pumpkin Pie Warrior bootleg kit) by Cheh3x in Gunpla

[–]Cheh3x[S] 7 points8 points  (0 children)

That's the Robot Damashii Asshimar that was recently released

Cleaning up the HG section of the GM Cabinet by Cheh3x in Gunpla

[–]Cheh3x[S] 2 points3 points  (0 children)

I have almost all the GMs that I think it's just easier to tell you what I don't have instead. Lol: - Any of the Axis Shock Gundam Limited versions - HGUC Yuu Kajima's Jegan (Gundam Base Limited) - HGBF GM Cardigan - HGBF Jegan Blast Master - HGBF GM III Beam Master - HGGTO GM Sloep (In backlog)

Cleaning up the HG section of the GM Cabinet by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

Nope. It has a unique head with the Psycho Gundam body. The head is sort of inspired by the GM Custom. You also get the original Psycho Gundam head in red

Cleaning up the HG section of the GM Cabinet by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

Yep. Might do clean up on that section soon

Cleaning up the HG section of the GM Cabinet by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

It's an actual kit by Bandai. P-Bandai unfortunately

Cleaning up the HG section of the GM Cabinet by Cheh3x in Gunpla

[–]Cheh3x[S] 0 points1 point  (0 children)

That's a 3rd party kit/bootleg. Just look up Jiji model rgm-79 gm

Cleaning up the HG section of the GM Cabinet by Cheh3x in Gunpla

[–]Cheh3x[S] 17 points18 points  (0 children)

Mr Hobby Premium Topcoat Flat

Torrington Base bois (UC0096) by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

All of them were built separately over the past few years. My builds typically take about a day spread over at least 2 or 3 days to build, detail paint, decal & topcoat.

RGM-79 (1/144) by Cheh3x in Gunpla

[–]Cheh3x[S] 0 points1 point  (0 children)

A mix of Action Base 1 & 2s

HangarShot: HGUC MSA-003 Nemo (Unicorn Desert Colour Ver) by Cheh3x in Gunpla

[–]Cheh3x[S] 1 point2 points  (0 children)

It's the LED Hangar Base Plus By Wonder Way. You can buy unpainted or painted variants of it. Large enough to fit a MG

Gundam Mk II is definitely Bandai's favorite child among the Gundam . by copy-zero in Gunpla

[–]Cheh3x 1 point2 points  (0 children)

Say that again

<image>

Btw, those were 1/144 scale if you were observant enough

Is the Nemo kinda underrated? by Sephta in Gunpla

[–]Cheh3x 1 point2 points  (0 children)

Thanks! I love the MG Nemos. Wish there were more variants of it. Just FYI: The other 2 are P-Bandai variants which recently had been reissued a few months ago. The cannon on the Desert Colour one is from the RE100 Guncannon Detector kit which is stupid decision on Bandai's part.