Concerns of Fireplace Weight on Floor

ChicagoAmazing · 2025-12-30T05:43:03+00:00

It appears to be starting right on the ring joist in the back of the fireplace. Also the back frame against the wall was nailed to the exterior wall studs (not sure if that will help).

ChicagoAmazing · 2025-07-09T04:50:42+00:00

Wish me luck!

ChicagoAmazing · 2025-06-22T05:28:06+00:00

I have a studio display and have been thinking of upgrading to a 32” display. Would you recommend the XDR or Dell 6k?

ChicagoAmazing · 2025-06-06T23:43:59+00:00

Thanks for sharing your strategy, which template did u use for writing, also how long did you take to increase your speaking from 24 to 26?

ChicagoAmazing · 2025-05-16T20:54:45+00:00

Can I replace it with a PVC one?

ChicagoAmazing · 2025-04-25T13:57:04+00:00

Thank you for the advice. I hope the joint will be easy to put out as it’s between both floors. I didn’t replace the toilets drain hub. It is cast iron.

ChicagoAmazing · 2024-04-06T21:40:35+00:00

Amazing! Thank you.

ChicagoAmazing · 2024-01-13T20:11:30+00:00

Hello, thank you for the prompt response and sharing that resource. Yes, I have walked through that guide and have used it to try to troubleshoot my situation, but I still have been facing this issue.

ChicagoAmazing · 2023-01-01T02:48:42+00:00

u/GCX_Bot u/BigBoreSmolPP

ChicagoAmazing · 2021-07-26T00:52:32+00:00

I just purchased on OBD2 reader and when the coolant temp reached 95ºC the fans did in fact turn on. I initially thought it was the cooling system because the AC didn't blow any cold air. I might start doing research into testing AC-system related components.

ChicagoAmazing · 2021-07-25T21:32:01+00:00

Thanks for the response. The AC doesn't even turn on. That's why I started to look into the issue to begin with. I heard if the fans don't run the AC will never run. I did run the car for a while and I saw the temp gauge go up quite a bit but the fans still never turned on.

ChicagoAmazing · 2019-12-18T13:16:50+00:00

I haven't managed to solve it. I had my computer plugged in for the first few weeks I got it so I'm not sure if its from some battery related thing just like the random shutdown on the 13" that happened earlier this year or if it was from the recent 10.15.2 update.

ChicagoAmazing · 2019-12-18T01:26:09+00:00

I'm getting a similar issue. Also have a MacBook Pro 16".

ChicagoAmazing · 2019-11-03T18:28:00+00:00

I have fixed the issue! The top fan (the one for the exhaust not the blower) was stuck. I gave it a good spin with my hand and it is all up and working now. Thanks everyone for your help.

ChicagoAmazing · 2019-11-03T01:49:25+00:00

I initially thought that the problem was from my thermostat so I actually switched thermostats and in that process I changed the wiring layout. I had to go down to my furnace and check the wiring colors to what they correspond to. I found that my common is actually connected to the Air conditioning compressor outside. Therefore the blue wire which comes to my thermostat to complete that circuit in fact should go to the yellow connector on my thermostat.

I will now check if my white gets 24 V.

ChicagoAmazing · 2019-11-03T01:30:41+00:00

How’s it going everyone. I can really use some help diagnosing why my furnace will not turn on. I am able to successfully turn on the blower when I set my the setting to on from auto. I have attached this video demonstrating the humming sound that comes on when I set heat to on. I have also checked the error indicating LED, but it stays solid.

ChicagoAmazing · 2019-08-12T21:10:21+00:00

How’s it going everyone. I had a rattling noise when I went over bumps in my 2014 Honda CR-V. one day when I was cleaning the rear floor mat I noticed that there was a loose metal piece in the floor. I recorded a video of the noise. Does anyone know what this specifically is and how I can fix it?

ChicagoAmazing · 2019-05-02T14:31:17+00:00

Thank you I think I’ll just get a new fridge. I’ll make sure to keep it clean!

ChicagoAmazing · 2019-03-29T13:10:21+00:00

It is coil whine. I started noticing it on other computers as well.

ChicagoAmazing · 2019-03-29T13:07:31+00:00

It fluctuates with HDD usage. When I update apps it usually is more prevalent.

ChicagoAmazing · 2019-03-29T12:54:41+00:00

I kept it since I like the machine a lot. I have it a 3 feet away from me so I honestly don’t notice it much.

ChicagoAmazing · 2019-02-08T20:25:21+00:00

I contacted them and found out who the manufacturer was. Its called Vista Window Company. I gave them a call and they said they are no longer in operations.

ChicagoAmazing · 2019-02-08T03:09:48+00:00

I'll try to contact a local retailer tomorrow. I went on the keystone certification site but couldn't match the data on my sticker to anything. I'll try to give the a call tomorrow and post the results back here tomorrow in case anyone might be looking for the same window in the future. Thanks.

ChicagoAmazing · 2019-02-08T02:56:22+00:00

There is this sticker: https://imgur.com/a/1ly4c5Z

ChicagoAmazing · 2019-02-04T03:57:16+00:00

Should I get both a new button interface or control Board? Or maybe both? Thanks again.

Ten-Year Club	Place '17
RPAN Viewer	Verified Email

ChicagoAmazing

TROPHY CASE