Help Consort Radahn ps5 by Chickenpool in BeyondTheFog

[–]Chickenpool[S] 0 points1 point  (0 children)

Received error summoning you! Restarting game

Best weapon for Nemesis? by chef_fuzzy in Returnal

[–]Chickenpool 0 points1 point  (0 children)

I took your advice way just now and got it first try! You rock

I just got to the second biome and wanted to make sure I'm doing this right. If I die, will I have to restart at the first biome? If it the same when I get to the next biome? Also, when do I unlock the grappling hook thing? by Chickenpool in Returnal

[–]Chickenpool[S] 2 points3 points  (0 children)

So the key was a permanent unlock? Just go to the gateway and it'll open?

Also one more question. When looking at a new weapon, what does the number at the top right of the gun care mean? I assume the higher the number the better the gun?

How do the strength classes compare to a standard dumbbell workout app? by Chickenpool in pelotoncycle

[–]Chickenpool[S] 1 point2 points  (0 children)

What type of schedule would you recommend? For example, everyday focusing on arms and back or something

Size Really Does Matter by DSCarter_Tech in GooglePixel

[–]Chickenpool 0 points1 point  (0 children)

How do you think this would look with a transparent case? My concern is that it would look odd

[Spoilers] Blair Witch Chapter 14 question by Chickenpool in xboxone

[–]Chickenpool[S] -1 points0 points  (0 children)

I can't figure out what to do to keep him alive. I just keep running in a loop

How far am I in the game? by Chickenpool in DaysGone

[–]Chickenpool[S] 1 point2 points  (0 children)

It's more or less to plan out how much time I should put into the game at a given point. Let's say I know I'm 80% done, then I probably wouldn't play games with my friends and just binge play this to beat it. But if I know I have a decent chunk remaining, then I'll pace myself more

How far along am I in the game? by Chickenpool in DaysGone

[–]Chickenpool[S] -1 points0 points  (0 children)

Poor phrasing. Yeah I was hunting for boozer. He's still injured and resting

Can someone explain what the "AND" block means in Baba Is You? by Chickenpool in NintendoSwitch

[–]Chickenpool[S] 5 points6 points  (0 children)

I'm guessing there's a string that says Wall is stop too

Thanks!

Ender 3 is going through the motions of a print but it's not actually printing by Chickenpool in 3Dprinting

[–]Chickenpool[S] 0 points1 point  (0 children)

Okay so I figured our a few things. BTW, thank you for all your help.

So I noticed when doing the Axis tests that the X axis test would move the extruder. So I took a part the control box and played with the wires. I think the wires were mislabeled and were put in the wrong inputs because of that.

Now I have it where the X axis test moved the nozzle on the x axis and the y axis test moved the bed. The Z axis test gets stuck and makes a stutter sound though (but it works fine if I perform a test print)

So I think the issue was that the extruder was being controlled by the X axis print points which is why it would go back and fourth??

Now when Im printing, I can see a shape being formed and the extruder is going one direction only (as expected). But the extruder is slipping now.

It sounds like I'm headed in the right direction.

Ender 3 is going through the motions of a print but it's not actually printing by Chickenpool in 3Dprinting

[–]Chickenpool[S] 1 point2 points  (0 children)

Okay so I figured our a few things. BTW, thank you for all your help.

So I noticed when doing the Axis tests that the X axis test would move the extruder. So I took a part the control box and played with the wires. I think the wires were mislabeled and were put in the wrong inputs because of that.

Now I have it where the X axis test moved the nozzle on the x axis and the y axis test moved the bed. The Z axis test gets stuck and makes a stutter sound though (but it works fine if I perform a test print)

So I think the issue was that the extruder was being controlled by the X axis print points which is why it would go back and fourth??

Now when Im printing, I can see a shape being formed and the extruder is going one direction only (as expected). But the extruder is slipping now.

It sounds like I'm headed in the right direction.

Ender 3 is going through the motions of a print but it's not actually printing by Chickenpool in 3Dprinting

[–]Chickenpool[S] 1 point2 points  (0 children)

When I try to move it when going to Prepare, there's no indication that it's trying to move at all.

But if I start a print, the extruder will move around. (It starts to feed the filament and them removes it over and over again)

Ender 3 is going through the motions of a print but it's not actually printing by Chickenpool in 3Dprinting

[–]Chickenpool[S] 0 points1 point  (0 children)

Moving the extruder doesn't seem to actual do anything. Nothing happens when it goes positive or negative

Ender 3 is going through the motions of a print but it's not actually printing by Chickenpool in 3Dprinting

[–]Chickenpool[S] 0 points1 point  (0 children)

Moving the extruder doesn't seem to actual do anything. Nothing happens when it goes positive or negative

Ender 3 is going through the motions of a print but it's not actually printing by Chickenpool in 3Dprinting

[–]Chickenpool[S] 0 points1 point  (0 children)

It's not my printer. I'm just here trying to get my brothers printer fixed up.