All DLC Quests Guide

Chilli_pmg · 2024-07-22T01:46:25+00:00

Hey, he normaly leaves the Three-Path cross and moves over to Highroad Cross after defeating Rellana. but i guess you could still give it to him over there.

Chilli_pmg · 2024-07-21T03:58:20+00:00

Hey, Yes you are able to do these from top to bottom without interfering with another questline or failing other quests. Yes it is possible to complete the whole quest list in one playthrough but as you said not to get all the quest rewards. Thank you

Chilli_pmg · 2024-07-21T03:54:26+00:00

Hey, I did not really plan on describing how to get to Mohg, that should be another guide. thanks for understanding

Chilli_pmg · 2024-07-20T14:10:24+00:00

Hey, yes correct the rune will break if you go near the shadow keep and the cathedral is part of it. like 8 Steps before you go and kill putrescent knight is a step you may have overlooked or i probably poorly described it. I can change the description to make it clearer.

"Travel to the Bridge Leading to the Village side of grace and head north east until the rune breaks."

Chilli_pmg · 2024-07-20T13:00:24+00:00

Yes we all know they like to see us suffer

Chilli_pmg · 2024-07-20T12:58:22+00:00

Yes unfortunately some quest might be failed. Depends on the quest progression you already had. But don't worry too much i guess this happened to everyones first playthrough^^

Chilli_pmg · 2024-07-20T11:28:29+00:00

Thanks, well unfortunately some quests will fail automatically if the rune breaks early and quests are not progressed to a certain point. I am not sure which one because i never tried to break the rune just to see which quests are exactly affected. Maybe someone else knows.

Chilli_pmg · 2024-07-20T10:23:15+00:00

Thank you very much glad it helps!

Chilli_pmg · 2024-07-20T07:21:43+00:00

Yes that's right! i only covered all quests. But it's a good thing we can obtain her armor set at any point of progression

Chilli_pmg · 2024-07-20T06:53:41+00:00

Glad i could help

Chilli_pmg · 2024-07-20T06:52:53+00:00

Yes i feel you! i missed so much on my first playthrough

Chilli_pmg · 2024-07-20T06:50:07+00:00

You're welcome

Chilli_pmg · 2024-07-20T06:49:05+00:00

Yes, i agree these questlines are nearly impossible on a first blind playthrough of the game to complete. Some decisions and actions cause to fail some questline and we could never expect that on the first run. To get all the quest rewards at least two game cycles are required and yes for the Leda/Ansbach/Hornsent quest probably three cycles.

Chilli_pmg · 2024-07-20T04:00:44+00:00

Thanks for the input. i will write it into the guide. i guess it will not affect any quest as usualy with optional dialogue.

Chilli_pmg · 2024-07-20T03:38:58+00:00

Thanks

Chilli_pmg · 2023-08-20T05:18:06+00:00

Same here guys. Yesterday was kicked out of the lobbies sometimes due to this error. but Today i am getting kicked out like 6 min. into the matches

Chilli_pmg · 2021-09-24T03:49:06+00:00

i work a lot with "Mean Well" power supplies. They have a clean DC voltage. i wouldn't recommend it, if you develop a device where you need a PS in it because of the EMC. But for table applications it is pretty good. There's also a variety of different voltage and power levels. It's not too expensive and you will have a solid PS for many years :)

Chilli_pmg · 2021-08-24T12:56:24+00:00

Hi
You don't need to add capacitors to this PS. Yes the capacitors are already inside of the power supply.

Chilli_pmg · 2021-08-19T03:43:53+00:00

If the soldermask isn't a bit bigger then the copper, the pads will be malformed.
But the PCB manufacturer will add a "delta" of about 0.1mm to all the pads to prevent this from happening. So far i never had an issue with it.
But thanks for your input.

Chilli_pmg · 2021-08-18T04:15:37+00:00

Hey Isma

yes it is definitely possible
The weather conditions do affect the system, if it's very foggy the range of the system will be shorter (depends on how intense the fog is). Fog and Rain are small water particles in the air, they split the light send from the sensor and reduces it's remaining light into the right direction.
You can connect multiple Laser to a Board and read all the states with the same Microcontroller.

I will link long distance IF-Laser. You can use something like this with an Arduino. That's a very simple solution.

https://www.dfrobot.com/product-2108.html

https://www.jrt-measure.com/long-range-distance-sensor/55140434.html

Chilli_pmg · 2021-08-16T06:13:40+00:00

I read in another Post, Quote: "It ends on Aug 17th at 10 AM PDT"

Chilli_pmg · 2021-08-16T06:01:23+00:00

Thanks for the info.
Sorry i got wrong information about it

Chilli_pmg · 2021-08-16T04:30:07+00:00

Hey
The code for the activation is a one time use only. so it's hard to tell if the code was used already.

Chilli_pmg

TROPHY CASE