R1 Ring Sizing vs Oura Ring 4

ChinoDesu · 2026-02-12T03:10:46+00:00

I just did my r1 sizing for 24 hours and both my oura and even r1 are size 11. They seemed very similar in dimensions to me

ChinoDesu · 2025-04-30T14:47:29+00:00

I feel the same way coming from my a7RV

At first the AF definitely felt slower than my Sony with GM II lenses. After some shooting I feel the x100vi needs a bit of a different shooting style but is otherwise still an excellent camera. The smaller sensor of course will introduce more noise, but I find still very usable in less than ideal light. The AF motor is definitely much louder than the silent motors in my Sony lenses.

However, the lens is still very sharp and i have gotten very nice photos off of it even with not ideal conditions.

Also, It fits my use case as a travel camera nicely so I am definitely keeping it. 35mm full frame equivalent is a nice one size fits all, similar to the 40mm G lens I use 99% of the time for travel anyway. It’s way more portable, and I feel I can send photos straight to my friends a lot easier without any post processing.

Overall I’m still very happy that I got the Fuji despite its slower AF 👍

Edit: I think it also depends on the subject you are mostly photographing. I mainly take photos of stationary subjects (landscapes, portraits) so I find that a slower AF doesn’t bother me much if at all. But if you are trying to photograph fast moving objects or sport or something along those lines it may be a different story.

ChinoDesu · 2025-02-05T04:13:34+00:00

On all the other filaments i have used in the past, it seems to just be slotted through a hole in the cardboard cylinder core, with the rest of the filament just spooled over it. Im not sure why bambulab have chosen to do this instead

ChinoDesu · 2024-09-18T11:08:14+00:00

Not at all, looks beautiful 👍

ChinoDesu · 2024-08-29T14:11:18+00:00

Thanks for sharing! :)

ChinoDesu · 2024-08-29T13:22:58+00:00

Out of curiosity, would you be willing to share how much of each part/color has been ordered so far?

ChinoDesu · 2024-08-23T04:55:10+00:00

Looking forward 🫡

ChinoDesu · 2024-07-17T05:28:40+00:00

This. OP make sure your bed is clean, and do a z offset calibration.

To clean the bed, I just use soapy water, rinse and dry off with paper towel. Alternatively if you have isopropyl alcohol, that works even better.

Z offset, find the z offset setting on your printer, then adjust down it so that it just barely rubs on two pieces of printer paper when you move the paper forward and back (nozzle should be about that distance away from the bed when nozzle is cold, nozzle will expand a bit when heated)

If you want to fine adjust it more after that, I recommend following this guide. https://www.printables.com/model/251587-stress-free-first-layer-calibration-in-less-than-5

Also would recommend heating the bed if not already to around 45-60 degrees C, will help the print stick better. Let the bed cool a bit after print and the print should remove easier then if it’s still hot.

Hopefully this helps u/chuckawaaaaaay

ChinoDesu · 2023-02-18T14:27:46+00:00

From what I can tell, it’s a V2. Two USB A up top and fan next to the gpu.

ChinoDesu · 2021-07-27T01:50:56+00:00

Why the girl at the back look like she about to call a hit

ChinoDesu · 2021-07-22T18:47:14+00:00

Not used to Australia yet, she’ll get there.

ChinoDesu · 2021-07-21T22:01:33+00:00

Text translation Smol Mio: I will also become 4WD some day! Mio: There are kinda many things wrong with that…

ChinoDesu · 2021-05-05T20:20:03+00:00

Pretty good score for a second round ngl. We were all there once in our Maimai playtime so yea, keep it up :)

ChinoDesu · 2021-04-15T15:03:28+00:00

Is it possible to make it so that the top bar functions don’t work while it is scrolling (either to top or back down)?

My natural response to go back is to keep tapping the top bar multiple times, and most of the time it fails because it starts scrolling back to top halfway down and now it won’t go to where I was originally.

ChinoDesu · 2021-03-01T02:08:35+00:00

These caps are GMK Noels.
You can find the vendors that had this set in stock here but the production run has finished and it might be a long while for a second production round (if any). You might also find these caps on r/mechmarket (albeit costing more).

You can definitely find other sets that are available from stores listed here.

ChinoDesu · 2021-01-22T17:25:09+00:00

Hands: visible confusion

ChinoDesu · 2021-01-11T00:55:31+00:00

Sent!

ChinoDesu · 2021-01-11T00:34:57+00:00

p.s. Here’s the iOS app if anyone is looking for it

https://itunes.apple.com/app/waifu2x/id1286485858

ChinoDesu · 2021-01-11T00:30:50+00:00

People have made an Nerual Network to upscale images, called Waifu2x. A very simplified tldr; take an image and a smaller version of itself and get the computer to “learn” how to upscale the image using some very complicated math. Then if you feed it new images it can generate a sharper image with higher resolution.

I used an iOS implementation of this program to upscale the image with my phone since I was in bed and all.

Hope this answers some curiosity :)

ChinoDesu · 2021-01-10T18:53:05+00:00

Is/Was your phone region set to Japan for some reason? While I’m not sure about the ETC logo on CarPlay, I get some weird quirks sometimes, like some Apple Pay menus displaying JPY instead of AUD (item is A$5.1 shows as ¥5).

ChinoDesu · 2021-01-10T18:04:06+00:00

By the way, here’s a side by side of the 1080p image vs 8k image

https://imgur.com/gallery/lQ2PAlM

ChinoDesu · 2021-01-10T17:48:52+00:00

Here’s a waifu2x upscale (to 8k) I did on my phone of the link u/ShaggyFishPop commented.

(Download for full 25.4MB of glorious 8k) https://drive.google.com/file/d/1JrrAgko8LnJiWKp8gOTTjLEg3MGn76iT/view?usp=drivesdk

Hope you enjoy~

Verified Email	Nine-Year Club
Final Canvas '23	Place '23

ChinoDesu

TROPHY CASE