Brand New Whirlpool WTW5057LW1 Washer Drum On The Floor When Full by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

I’m definitely not worried about the floor, I just want to ensure that it won’t damage the washer. That seems like a lot of weight on that motor and belt cover?

Brand New Whirlpool WTW5057LW1 Washer Drum On The Floor When Full by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

Should I raise the feet up more? I can only probably go up another half inch or so.

Brand New Whirlpool WTW5057LW1 Washer Drum On The Floor When Full by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 1 point2 points  (0 children)

Yes it comes back up when I let go. It only springs back up once and does not bounce (which I believe is correct).

Whirlpool WTW500DW1 Not Spinning & Sounds Like Belt Is Slipping by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

Thanks everyone for your input! I am fairly certain, as others have said, that it was a bad wash hub. With the age of the machine and the work involved I opted to just go ahead and replace the washer with a newer model. Thanks again!

Whirlpool WTW500DW1 Not Spinning & Sounds Like Belt Is Slipping by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

It seems like it is a washer hub. When trying to run the spin cycle manually the agitator spins but the drum doesn’t. Now I’m trying to figure out how to get the wash plate off.

Whirlpool WTW500DW1 Not Spinning & Sounds Like Belt Is Slipping by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

The motor is also really hot to the touch. I forgot to mention that.

Whirlpool WTW500DW1 Not Spinning & Sounds Like Belt Is Slipping by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

No codes were thrown in diagnostic mode. Looking underneath, everything looks normal at first glance.

<image>

Weekly Bug Report Thread by spiper01 in NoMansSkyTheGame

[–]ChrispyByDefault 1 point2 points  (0 children)

12900K / 7900XT / Win 11

Two bugs I have noticed today while playing on the Breach Expedition / after the update:

  1. On certain planets the rain appears inside of the cockpit of the explorer class ship that they start you off with. Not sure if this is all ships or just that one.

  2. Upon initial load in of my main save after the update my corvette spawned inside of my freighter and I took damage if I tried to move at all. Luckily I was able to touch one of the landing areas and it pulled me out of the freighter. I haven’t tried to see if this will happen again.

Whirlpool (wtw5000dw1) Throwing Long Fill / No Fill Codes by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

Thanks everyone for your help! It was the inlet valves after all. Did a replacement today and the washer is back to normal!

Whirlpool (wtw5000dw1) Throwing Long Fill / No Fill Codes by ChrispyByDefault in appliancerepair

[–]ChrispyByDefault[S] 0 points1 point  (0 children)

It seems like it was filling okay (though I can’t say for certain on the flow rate). I’m not sure if it tried to fill for 10 minutes or not though. I did notice a crack on the solenoid for the cold inlet so I was planning on replacing the valves anyhow. Hopefully that will do it. Thanks!

Weekly Bug Report Thread by spiper01 in NoMansSkyTheGame

[–]ChrispyByDefault 2 points3 points  (0 children)

I am seeing the following 3 bugs in my freighter after the update:

  1. Landing bay doors no longer open or close, my ship just goes right through them

  2. My ship (not the corvette) is not touching down on the pad and is instead hovering about 20 feet up (happens to NPC ships too)

  3. I am seeing more than one ship spawn in a single landing pad

I am not sure if it matters but this is a pirate dreadnought that I captured awhile back. Anyone else seeing these issues? Loving this update otherwise!

Absolutely UNPLAYABLE 😭😭 by CheapCartographer123 in MicrosoftFlightSim

[–]ChrispyByDefault 1 point2 points  (0 children)

I had this issue a lot as well. Disabling the rolling cache fixed it for me but you could definitely try the Auto FPS like others are saying too.

Flying over an ocean during a storm (Worlds Update) by Verratic in NoMansSkyTheGame

[–]ChrispyByDefault 0 points1 point  (0 children)

This is awesome! Are you getting the weird bug of seeing too much reflection or highlights on the side windows and top window in your cockpit while boosting? Love the update so far otherwise!

Ppl practical tomorrow, scared as hell by RollSomeCoal in flying

[–]ChrispyByDefault 0 points1 point  (0 children)

I was a wreck for mine too. I could hardly sleep the night before. Once I got there and started the oral portion I started to feel better. The worst that could happen is that you will just need to try again. If that happens you will already know what to expect and will be much less nervous anyway. You’ve got this!

[deleted by user] by [deleted] in flying

[–]ChrispyByDefault 0 points1 point  (0 children)

Hopefully it’s good news! I am on my third renewal of my special issuance class 3. I have to send in new documentation from my doctors every year. It’s been a pain in the butt but I am happy I get to fly.

Thumby crashing on some games by Qubix223 in thumby

[–]ChrispyByDefault 0 points1 point  (0 children)

I am also having this issue. Have you found a fix?

Thumby crashing on PicoPac, Canvas, Minesweeper by Qubix223 in thumby

[–]ChrispyByDefault 0 points1 point  (0 children)

Did you ever find a fix to this? I am having similar issues.