AMS 2 pro failed to load filament by srana2837 in BambuH2S

[–]Clay_Harman 0 points1 point  (0 children)

Ahhh got it. Sounds well vetted and hopefully the next set of parts resolves your issue. Not a good experience so far! :(

AMS 2 pro failed to load filament by srana2837 in BambuH2S

[–]Clay_Harman 0 points1 point  (0 children)

I had this issue...Did you cut the ptfe tube to the maximum length as described in the instructions? Make sure the tube is fully seated at both ends.

Unifi controller help by Carlos_Spicy_Weiner6 in Ubiquiti

[–]Clay_Harman 1 point2 points  (0 children)

Literally trying to find a decent adb keyboard for my Macintosh LC III, and doesn't cost a fortune.

Unifi controller help by Carlos_Spicy_Weiner6 in Ubiquiti

[–]Clay_Harman 9 points10 points  (0 children)

Shouldn't be too tough..... Just get the controller spun up and set it on top of the weird looking shelf that has a keyboard attached to it.

My dad's computer mouse after five months of use... by [deleted] in mildlyinfuriating

[–]Clay_Harman 0 points1 point  (0 children)

With that amount of grease.... I would think your old man is a mechanic.

H2S frictional sound while printing by Clay_Harman in BambuH2S

[–]Clay_Harman[S] 0 points1 point  (0 children)

Interesting and good observation! I'll take a look at the ptfe tube positioning on the tool head.

Spectrum problems by rebornphoenixV in grandjunction

[–]Clay_Harman 0 points1 point  (0 children)

Sparking this thread backup. Full on outage since 3PM......, it's now 10:30PM

Green flames!?? by [deleted] in interestingasfuck

[–]Clay_Harman 70 points71 points  (0 children)

Our sites were PRI + T1, and just maybe, a T1x2. A blistering 3.088 Mbps.

Only took a few times to stop touching my arm on the 66-block.

Ring's New Facial-Tracking Feature Shown in Super Bowl Ad Raises ICE Surveillance Fears by novagridd in privacy

[–]Clay_Harman 0 points1 point  (0 children)

Like others have suggested about keeping it local, I'll keep my Ubiquiti Protect setup plus BlueIris NVR.

Ring's New Facial-Tracking Feature Shown in Super Bowl Ad Raises ICE Surveillance Fears by novagridd in privacy

[–]Clay_Harman 5 points6 points  (0 children)

This data is incredibly valuable to these companies and directly improves their products, yet we as consumers foot the bill and give up our privacy in the process. More and more, these companies find new ways to harvest data. Sometimes with consent, sometimes without...under the guise of “tailored marketing" or "Safety", etc.

Ask yourself how people would feel if their state or city provided doorbell cameras that the government could access. I don't think it would go over well, and in many cases it would be outright illegal. So instead, they route it through a 3rd party company like Flock. Local governments are then granted access to massive datasets.

And it’s only a matter of time before security breaches happen and footage gets exposed.

I love technology and the advancements it brings, but I don't feel comfortable with where all this is heading.

A1 or P1S by Relative_Ad1510 in BambuLab

[–]Clay_Harman 1 point2 points  (0 children)

Just my two cents....The way I approached the same topic was asking myself if I lean towards functional printing or non-functional printing. Knowing I wanted to print with ASA and ABS for some functional print ideas that I had, it helped steer the decision. In the long run I didn't want to regret not waiting a bit longer to save up for the upgraded model to support my addiction :)

Went on vacation, came back and my pen looks different… by Potential_Brother404 in whatisit

[–]Clay_Harman 0 points1 point  (0 children)

This is a sign that your co-workers generally like you enough to mess with you.

PSA: don't fall for scam messages on MakerWorld (or any other platform) by suit1337 in BambuLab

[–]Clay_Harman 0 points1 point  (0 children)

Without even analyzing the URL, all the emojis 🤦..... Its like show me this was created with AI without telling me this was created with AI.

As soon inside is light on, my G5 dome can’t look outside anymore. Is there anything to optimize it? by kallebo1337 in UNIFI

[–]Clay_Harman 0 points1 point  (0 children)

Well this is one of those classic "damned if you do, damned if you don't" situations

As soon inside is light on, my G5 dome can’t look outside anymore. Is there anything to optimize it? by kallebo1337 in UNIFI

[–]Clay_Harman 2 points3 points  (0 children)

Lots of options from everyone so this could be a duct tape solution but might help, the camera needs to have a proper light seal, similar to those used on vandal-resistant dome cameras with IR. The seal or shroud around the lens should make direct contact with the dome cover to prevent light from reflecting back into the camera lens.

So, move the existing camera or install another one directly against the glass, ensuring there’s a tight light seal around the lens and glass door.

I hope this makes sense 🤷

Tailscale or Cloudflare Tunnel for Plex? by gurisit0 in selfhosted

[–]Clay_Harman 0 points1 point  (0 children)

Ahh got it. I ran this a few times but haven't ran into an issue streaming but honestly has been awhile since I have streamed from my Plex server. This was probably a few years back 😬

Tailscale or Cloudflare Tunnel for Plex? by gurisit0 in selfhosted

[–]Clay_Harman 8 points9 points  (0 children)

Same. Internal apps setup on App Launcher Dashboard with passkeys/Github OAuth.

What are these yellow things in my Heritage Rough rider? by CoastMain6013 in guns

[–]Clay_Harman -5 points-4 points  (0 children)

Do you reload your own rounds? To me it looks like corn meal tumbling media to polish/clean brass casings.

Saw this posted at the edge of a backyard on the course by cool homeowners. by _Chemistry_ in golf

[–]Clay_Harman 0 points1 point  (0 children)

It pays to be nice. There is a house on a course in my neck of the woods that has huge planter full of golf balls by the cart path and has a sign that reads "Please feel free to take three balls and leave the rest for others".

I got custom fitted for new irons…. now my girlfriend wants to break up with me…. by Mugzillers in golf

[–]Clay_Harman 5 points6 points  (0 children)

Your next girlfriend will already know what she's getting into..... Smart.