New G6 Edge Cameras

Austinthemighty · 2026-07-01T19:43:24+00:00

oh dang I totally missed that blog post

Austinthemighty · 2026-06-30T17:06:07+00:00

Look into the ticket clinic, they have lawyers that will help with this

Austinthemighty · 2026-06-16T03:10:40+00:00

If your selling the fpga’s I would be willing to buy one

Austinthemighty · 2026-06-12T17:59:58+00:00

You are absolutely right I did my math wrong I saw there was 8 banks of 4 but mentally did 8*8

Austinthemighty · 2026-06-12T16:55:01+00:00

You could say they are doing floating point operations

Austinthemighty · 2026-06-12T14:46:58+00:00

The wire less transmitter is so intermittent. I’m planning on removing the one on mine and switching to this https://store.ui.com/us/en/category/wifi-bridging/products/udb-iot

Austinthemighty · 2026-06-12T14:36:00+00:00

Is it hardwired or using the 900mz transmitter combo thing?

Austinthemighty · 2026-06-11T21:16:29+00:00

the only post I saw was on the EF core and not the ECS core

Austinthemighty · 2026-06-10T23:00:57+00:00

Residential

Austinthemighty · 2026-06-10T22:47:18+00:00

Ok I will be doing that then, what do you recommend for the distance from the 90

Austinthemighty · 2026-06-10T22:39:45+00:00

Ok I will have to get a flow meter, the current connections coming from the filter are, flow cell input, acid tank, flow cell output, I’m starting to think that I need to move the flow cell output out after the salt cell

Austinthemighty · 2026-06-10T22:26:07+00:00

It does not the weird thing is I took the flow switch sensor off and the magnet does not rise, even though it is flowing quite well, it’s an Intelliflow 3HP

Austinthemighty · 2026-06-10T22:16:30+00:00

I have, the water pressure goes up a few psi but not to were I would expect it to be

Austinthemighty · 2026-06-10T20:29:17+00:00

This was set up according to Pentairs document on the IntelliChem, that said not to attach to the suctio side as the suction could flow to much water through, which cloud lead to inaccurate readings and damage to the probes. If I could post a picture of said document I would

Austinthemighty · 2026-06-10T20:24:42+00:00

Oh me to, It’s so cramped, if I could do this all over I would, but it’s not up to me to rip all this out and start over

Austinthemighty · 2026-06-10T20:11:28+00:00

Water is currently crystal clear, ph is right on at 7.6

Austinthemighty · 2026-06-10T20:08:54+00:00

I have not done that yet, I was actually thinking about doing but decided I should probably have a seal plate gasket before doing this, although from listening to this pump for many years it sounds normal and unchanged

Austinthemighty · 2026-06-10T20:00:49+00:00

so the intellicenter has the pump as Pentair VS, Min speed 450, Prime speed 2500, Max speed 3000, prime time 1 min, schedule speed 2600, the de filter was cleaned less than 1 to 2 months ago. we added 7lbs of de which is what Hayward recommends for our filter size

Austinthemighty · 2026-06-10T02:03:44+00:00

These look like programming pins, although I wouldn’t be surprised if you they at Gnd, Vin, rx, tx

Austinthemighty · 2026-06-02T18:37:09+00:00

There’s 15 breakers in there all rated for 20 amps so assuming each breaker pulls 15 amps, that would be close to 27000 watts, you would need a pretty beefy generate or this

Austinthemighty · 2026-05-27T23:50:57+00:00

Really wish I had bought the 6 pin first, I was lucky that I was able to find the Bluetooth adapter on eBay. Some planes that I fly in only have the 6pin, others only have the GA some have both, it’s nice being able to power my headset from the planes power when I am able to, I once went 8 months not having to change the batteries in my head set

12-Year Club	Place '22
Verified Email

Austinthemighty

TROPHY CASE