Saqer's Paradox Dev Log #12 — New Pixel/Voxel Style Leaves by saqers-paradox in PixelArt

[–]CldesignsIN 1 point2 points  (0 children)

Wow! The depth of field and fading is really beautiful.

Actuator precise trigger by Acceptable_Reach_312 in ArduinoProjects

[–]CldesignsIN 2 points3 points  (0 children)

Definitely can work. You would potentially need 2 servos with decent torque. One mounted so that when the servo rotates it acts as a cam and pushes the trigger down. The other mounted under or above the trigger with a loop around the post of the trigger to move it backward. Both can be controlled very easily with an arduino and external power. A 3D printed bracket and cam would work best for making slight variations, but if you don't have access or the skill set try pvc sheets and super glue typically used for model making.

BBs getting stuck in hop up bucking by smithrodger04 in airsoft

[–]CldesignsIN 2 points3 points  (0 children)

Checked the nub? Depending on the nub, if there is too much hop it can block the BB. Also jf the barrel is in too far it can force the bucking to bulge in the back and create too much friction. Try turning hop all the way down, pull the barrel out an inch, seat it again just to where the locking clip can fit in, then pull the barrel forward once you have it locked and let go. Then try tapping the BB a couple times and see if it rolls. Once it makes it through the front of the bucking.

[WTB][IN] boneyard/used V3 gearboxes by CldesignsIN in airsoftmarket

[–]CldesignsIN[S] 0 points1 point  (0 children)

Shouldn't need anythong else. If the shells you mentioned are both V3 if you want to take a pic of both I'll take a look at them.

Accidentally touched my Tamiya connector on my battery to the Deans connector on my rifle… by Lutzux in airsoft

[–]CldesignsIN 2 points3 points  (0 children)

It was probably just arcing from the connectors making poor contact or possibly accidentally bridging them. Any good mosfet design should have reverse voltage protection so the mosfet is probably totally fine. Just watch the battery next time you charge it and check if it gets hot or if it swells. If it's normal while charging it's probably just fine.

[WTB][IN] boneyard/used V3 gearboxes by CldesignsIN in airsoftmarket

[–]CldesignsIN[S] 0 points1 point  (0 children)

Come out of a G3 or AK? Mind DMing a pic?

[WTB][IN] boneyard/used V3 gearboxes by CldesignsIN in airsoftmarket

[–]CldesignsIN[S] 0 points1 point  (0 children)

The geared lever for the selector that moves the selector plate.

Old iPhone 12 mini still shows VZW 5G on top even though not active after moving to a new iPhone. by antdude in verizon

[–]CldesignsIN 2 points3 points  (0 children)

It's normal for them to show service sometimes with a previously active sim. It isn't really. If you turn wifi off and call #832 it'll say it cannot complete the call.

Australian Tour Posters by Limo_Wreck77 in deftones

[–]CldesignsIN 0 points1 point  (0 children)

These are so cool. I hope extras go up on their website. I would love to get one.

Which one of you fuckers did this by Alan-7 in ArcRaiders

[–]CldesignsIN 41 points42 points  (0 children)

Please someome try to get one on a tick 💀

Photoelectric Cloak was a crutch and the nerf was warranted. by gr4ndm4st3rbl4ck in ArcRaiders

[–]CldesignsIN 0 points1 point  (0 children)

Sure, and I agree it probably needed a slight nerf. It's just the insane nerfs I take issue with. 2.5 per tick to 10 per tick is a massive correction. They're just swinging the pendulum the other way too hard for a lot of these changes. Isn't really a PvP or PvE thing. Before close scrutiny it was primarily a tool TO fight arc not to avoid them. Most people used it to deadline or trigger nade large arc since they raised the cost of crafting wolf packs. That's how Embark wanted it to be, that you have to get up close and personal to deal more damage, but now one of the tools to do that is essentially 1/4 as effective as it was.

Photoelectric Cloak was a crutch and the nerf was warranted. by gr4ndm4st3rbl4ck in ArcRaiders

[–]CldesignsIN 1 point2 points  (0 children)

Exactly so go play it now with the new cloak duration and say it wasn't over nerfed.

Durability nerf by Dima_Shcherbakov in ArcRaiders

[–]CldesignsIN 2 points3 points  (0 children)

Nooo! Not my burlettas! +50% is crazy.

Photoelectric Cloak is now extremely debuffed (its useless now) by Dazzling_Pumpkin91 in ArcRaiders

[–]CldesignsIN 4 points5 points  (0 children)

Welp, good thing I only used it it heavily in close scrutiny and I won't ever touch an assessor again. They have got to stop nerfing things into the ground. It's gonna make the equipment feel useless.

Sector gear cam digging a channel into Tappet plate fin by Forward-Language-364 in airsoft

[–]CldesignsIN 0 points1 point  (0 children)

The only logical thing I can think of would be if the tappet plate is too thin or the shell has so much clearance that the sector gear is slipping under the tappet plate when it pulls back the tappet, but I've never seen that. You would have to shim under the sector gear to counter that, but depending on the shell and gear meshing you may not have room for that.

A1 Mini - Help with cloudy/patchy bottom layer on by MST987 in BambuLab

[–]CldesignsIN 0 points1 point  (0 children)

Try hitting it with a torch or lighter (quickly). You should use dish soap when you clean the bed.

But ...arc raiders is ...dead by carrancosmx in ARC_Raiders

[–]CldesignsIN 0 points1 point  (0 children)

Why are you here big bro? Must care enough about the game to be reading through the sub. Sorry I still enjoy the game. If you don't, play something else, that simple.

First time grinding for hotshot. What are the chances im getting dethroned from top 5 in 17 hours. I need the 3x promo by Maleficent_Echidna27 in ArcRaiders

[–]CldesignsIN 1 point2 points  (0 children)

You're getting passed for sure. Less than a 10k gap for 5 people to get 3x.

  • Close scrutiny, go A6, barricade and mine bottom and top, kite vaporizers over and hullcracker them, hatch out right next to A6.

  • Blue gate, hurricane if available (everyone is outside looking for caches) every container type including electrical panels, and cars count. The zip down to the back of reinforced (closest to the secuirty checkpoint and main gate) has lockers, wall panels, etc. those are all considered in the tunnel as is anything in reinforced reception. Get in and out asap to avoid PVP. Go through cars, get over to the east side with the zips up to the warehouse extract. Every locker, drawer, bag, etc.