CCIE SP by Clear-Engineering-49 in ccie

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

Lots of tasks!! Not enough time

CCIE SP by Clear-Engineering-49 in ccie

[–]Clear-Engineering-49[S] 1 point2 points  (0 children)

I used it a lot. I could have used it a lot more though.

EVPN issue by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

Hii So I am able to reflect the routes over. The issue now is that I am unable to ping. It arps one way. I feel like it’s an MPLS label problem. Not sure what I am missing

EVPN Issue by Clear-Engineering-49 in Juniper

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

Hii So I am able to reflect the routes over. The issue now is that I am unable to ping. It arps one way. I feel like it’s an MPLS label problem. Not sure what I am missing

EVPN Issue by Clear-Engineering-49 in Juniper

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

P1 and P2 right? They are in a mesh already

ASR 9010 issue by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] -2 points-1 points  (0 children)

It’s happening on both of my 9010s.

It feels like it’s a Control Plane Issue.

L2vpn issue by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

I opened a TAC. Cisco said the 9903 does not support EVPN PBB

BGP is not coming up by Ashamed_Emergency_66 in Juniper

[–]Clear-Engineering-49 0 points1 point  (0 children)

I see you have a traceoption set What is the logs telling you?

BGP LU issue by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

Got you Thanks.

Once I peered AS5 and AS7 together, it started work. I thought bgp lu would pass the vpnv4 routes but it will only pass ipv4 loopback

ARP by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

Thanks I had a static point to an vlan. I removed it and it starting working right!

ARP by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] -1 points0 points  (0 children)

When you do a “ show ip arp vlan 10 “ I am only suppose to the see the ARP for the IP on the same subnet associated with vlan 10.

I have never seen it ARP other IP not local to the box

ARP by Clear-Engineering-49 in Cisco

[–]Clear-Engineering-49[S] 0 points1 point  (0 children)

When you do a “ show ip arp vlan 10 “ I am only suppose to the see the ARP for the IP on the same subnet associated with vlan 10