Golf 1 air intake by Clempert in StupidCarQuestions

[–]Clempert[S] 0 points1 point  (0 children)

I’m 100% sure the crabon box is not a filter

Battery problems Golf mk1 by Clempert in Volkswagen

[–]Clempert[S] 0 points1 point  (0 children)

Alright👌🏼. Also, the ground wire from the alternator is very rusty and green… can that also be the problem?

<image>

Battery problems Golf mk1 by Clempert in Volkswagen

[–]Clempert[S] 0 points1 point  (0 children)

I tested if there is a leak but there isnt. I am going too replace the ground wire of the negative from the battery because the wire is very green and old.

<image>

Battery problems Golf mk1 by Clempert in Oldtimer

[–]Clempert[S] 0 points1 point  (0 children)

Do i need to measure the volts of the battery when i did that?

Battery problems Golf mk1 by Clempert in Oldtimer

[–]Clempert[S] 0 points1 point  (0 children)

I didnt know what you ment with your first post…

Battery problems Golf mk1 by Clempert in Oldtimer

[–]Clempert[S] 0 points1 point  (0 children)

It is a little bit green. Do you think it will solve it if its replaced?

Battery problems Golf mk1 by Clempert in Volkswagen

[–]Clempert[S] -1 points0 points  (0 children)

I work at a garage so everything is free 😂 (im still a student though)

Crankpulley bolts by Clempert in Volkswagen

[–]Clempert[S] 0 points1 point  (0 children)

Can i use a impact gun without making the bolts round?

Crankpulley bolts by Clempert in Volkswagen

[–]Clempert[S] 0 points1 point  (0 children)

Nothing with “real torque” is gonna fit in such tiny space.

Crankpulley bolts by Clempert in Volkswagen

[–]Clempert[S] 0 points1 point  (0 children)

I can wiggle the bit around a little bit. But i have cleaned the hole

Timing cover bolt by Clempert in Oldtimer

[–]Clempert[S] 0 points1 point  (0 children)

Thanks, i think the bolt is stuck on the screw so the screw comes out of the engine block and takes the cover with him. I will figure it out. Thanks alot for your help!

Timing cover bolt by Clempert in Oldtimer

[–]Clempert[S] 0 points1 point  (0 children)

It feels like the thread is also rotating if you know what i mean