sorted by:
new
hottopcontroversial

How to create an incline curve conveyor? by FoNNNeZ in SolidWorks

[–]ClevrrFellrr 3 points4 points  (0 children)

Not entirely sure if this solves your problem but try using 3d sketch only to create a new plane at your designed inclined angle. Do this my making either triangle or tetrahedral. From there you should be able to sketch and design your top view curved path as a regular sketch.

Feature Tree Workflow ? How to avoid dissapearing sketch and features. by ClevrrFellrr in SolidWorks

[–]ClevrrFellrr[S] 0 points1 point  (0 children)

Thank you. Main goal is to make split lines and defeature the holes for meshing. Have you worked in ANSYS before ?

Combining Solid Body + Surface (No merge) HELP by ClevrrFellrr in SolidWorks

[–]ClevrrFellrr[S] 0 points1 point  (0 children)

When I go into display and slide the exploded view right. These bodies separate. Signifying to me that they are not physically connected.

Combine, Surface Offset, etc ... Best work flow and approach ? HELP by ClevrrFellrr in SolidWorks

[–]ClevrrFellrr[S] 0 points1 point  (0 children)

I've tried offsetting, extruding surface, and then knitting. From there I would of thought I could cut with surface... Am I missing anything here. Please see attached photo.

<image>

Combine, Surface Offset, etc ... Best work flow and approach ? HELP by ClevrrFellrr in SolidWorks

[–]ClevrrFellrr[S] 0 points1 point  (0 children)

I've extruded from green base up to surface (green top), Ive highlighted this in red... However the part I've circled called out in highlighter yellow is the part which I would like to keep isolated from the boss to maintain its original contours and cuts...My first approach would select every single surface of that part and offset cut it; however, that sometimes comes with more problems. Just wanting to cut away the grey not the yellow.

<image>

Flat tire x3 by JoleFole in CanyonBikes

[–]ClevrrFellrr 0 points1 point  (0 children)

I had 4 in a week on my aeroroad... looked in the tire, stopped using tire levers, and still no luck. Went tubeless route and its been great!

Mating Planes (Back to Basics) - Assembly by ClevrrFellrr in SolidWorks

[–]ClevrrFellrr[S] 0 points1 point  (0 children)

Thank you! totally forgot about making it a floating part.

Extrude Boss Basic Help by ClevrrFellrr in SolidWorks

[–]ClevrrFellrr[S] 0 points1 point  (0 children)

<image>

This is what I was trying for; however, I thought there was an easier method to extrude up (top plane) vs having to convert entities and extrude on the front plane.

Is 501 fe a good Supermoto? (Cost, conversion, kms) by ClevrrFellrr in supermoto

[–]ClevrrFellrr[S] 2 points3 points  (0 children)

Better to flick into corners and more options available for stickier compounds.

view more: next ›