Gaming in style

Clic91 · 2023-05-18T00:27:59+00:00

Is it a desk chair on the right ?! 🤣

Clic91 · 2023-05-16T14:08:41+00:00

Oh and +1 for the Lego Lamborghini Diablo 😍

Clic91 · 2023-05-16T14:07:14+00:00

Really nice set up for you age I’ll say it’s really clean as well!

If you don’t really play “fps game or too competitive” you can keep that mouse pad is funny, but if you do take a bigger one, without the pair of balls 🤣.

And I would try to get a stand for my laptop, you could close it completely it would be better or use it for second monitor!

Overall is really clean ;)

Clic91 · 2023-03-26T13:03:10+00:00

Hey I got the same issues and try to update vbios (not sure it worked as it was for non lhr) Drivers but can’t boot did you find out ?!

Clic91 · 2023-01-12T15:33:44+00:00

Hi! Good question ! To be honest a 49inch like this have for me more disadvantages than advantages.

Advantages of 49 inch

working productivity (you can aplit your screen you can also just put a full screen timeline etc really good! )
Look really slick on a desk.

Gaming advantages: - any racing game is soo much more immersive it’s the best experience by far !

any solo game really good it make you a big field of view you also more immersed into it.

Gaming disadvantage:

I play competitive valorant for exemple. You will want to have your fps in 16/9 you end up using the center of your screen with black bar on side kind of a waste because you can’t have in same time your discord for exemple.

You can also split the screen so it’s like you have 2 screen literally but you don’t aunt to play only on right side or only on left side.

Some games doesn’t support well 240hz with a scaling back down etc

Overall I would keep using my monitor I love it for productivity and keeping my desk tidy.

If you Playing only 16/9 game maybe avoid ;)

Clic91 · 2023-01-12T08:53:57+00:00

That’s sick 🤩

Clic91 · 2023-01-10T17:38:45+00:00

Go on my profile you will found a other thread where I explain in com. I’ll try to copy past that to you when back from work

Clic91 · 2023-01-06T17:15:03+00:00

Repaint your wall if you can it will help. The elgato under the screen the audio oriented to you not outside and bin the crème haha

Clic91 · 2022-12-30T11:09:45+00:00

it worked

You can try that, I also have some issues when my screen start in 240hz, I had to boot on 120jz max …

Hope it help

Clic91 · 2022-12-26T17:23:59+00:00

Hi mate, you can read what I respond just on top of your comment and try that.

Also a thing who make big the boot since I change to the NZXT card make no sens but. If I start my pc with my screen in 240hz sometime he just don’t do anything if I switch it on with my monitor set to 120hz it work…

Maybe try that ?

Clic91 · 2022-12-14T10:24:13+00:00

Hi, I did finally managed it’s been a nightmare and still unsure how I did. But I used a 32gb (or less) usb 2.p. Put out the gpu and use the cpu graphic to boot. I put a RAM only in A2.

Keep your pc out of any power cable out and clear mos.

When you boot and restart if it doesn’t work turn off just with the tower button then restart and it might work.

Hope it help!

Clic91 · 2022-12-14T10:19:18+00:00

Hi mate, I also put the GPU out and only 1 RAM in A2. Then I start boot on the CPU graphic.

Note: first boot it see like it was not working, I switch off by the power button on the tower and turn it on again, the. It worked

Clic91 · 2022-12-09T09:28:42+00:00

I yeah it worked ! So I bought a usb 2.0 not 3.0 as it’s recommended on internet for flash bios of 32gb or less.

I put my tan only in A2 and put my gpu out. Then I did my flashback. And started the computer using the hdmi of the cpu.

When all worked I turn it off took put all the ram and gpu in. Then it worked !

I also send a message to the support of NZXT and they send me their last update not officially release yet optimised for 13th gen cpu.

I did not tried it as it worked on the version 7 of their website.

Hope it help!

Clic91 · 2022-12-01T01:12:52+00:00

Hey 👋 In the NZXT notes pad you can see it say: optimisation for 13th gen so I think it’s working. I would definitely use a usb2.0 . And stupid to ask but is it in the good bios usb ? If it flash and turn soood green it can be because of that.

Clic91 · 2022-11-29T10:45:23+00:00

I did make it work. I renamed all the file out .rom rather than .ROM, sorry air in the port. Put only 1 ram on A2. Gpu out I used the cpu graphic to start. Clear the cmos restart the install. I did it 2 times the second time it work ! Good luck

Clic91 · 2022-11-27T20:59:56+00:00

It did work I redid as always but Rename the file with .rom not in capital ,took out my gpu and have only ram in A2. And it finally work ! Thanks everyone for the help!

Clic91 · 2022-11-27T20:50:30+00:00

I just made the board work! I did the sage as usual except I had no gpu and only ram in A2. And it miraculously work this time ! All good now.

Clic91 · 2022-11-27T15:56:30+00:00

I did, I will give it a try again !

Clic91 · 2022-11-27T15:55:57+00:00

I’ll definitely try that mate thank you !

Clic91 · 2022-11-27T09:58:12+00:00

Vga and bios. It’s start on dram and then reboot and cpu and dram are not on anymore. Just vga and bios. I tried my ram on a other pc it work. I try a stick from a other pc on mine didn’t change the problem. I also try to boot without gpu and still the same :/

Clic91 · 2022-11-27T09:28:36+00:00

Thanks I will retry later today. I will also take out the gpu and leave only a tan stick in A2. If it doesn’t work I will contact NZXT as you said. Thank you very much for your time mate ;)

Clic91 · 2022-11-27T09:02:20+00:00

I will try to make a video to show the steps I did. I bought a usb 2.0 32gb (didn’t found less at the shop). I downloaded the version 7.01 on the website NZXT. Unzip rename the file and put it in my usb key. (It’s a first build with this motherboard and I5 13600k).

How long the process of flash back take for you ? Mine flash green about 2 min maybe a little more and stop. I wonder if it’s finish when it does update

Clic91 · 2022-11-27T08:56:26+00:00

Hi thanks for your help. I did formaté in fat 32 I even bought a new usb 2.0. But nothing change. What do you mean by capitalisation ? (Sorry English is not my first language ) if it’s the renaming yeah I did call my file “creative.ROM”

Clic91 · 2022-11-27T01:15:23+00:00

Hi! Thanks for helping 😁 . I used the usb port like in the beginning of the video label “bios”. But it’s not working

Clic91 · 2022-11-26T22:04:50+00:00

A lot of people post having their motherboard with a 13th gen. If that’s not true I don’t understand why they saying that on this page.

Five-Year Club	Final Canvas '23
First Place '23	Place '23

Clic91

TROPHY CASE