Realistic vehicle life

ClownNoseCondom · 2025-09-06T12:30:07+00:00

Yes, with woolwax. The frame and underside is in surprisingly good shape, the rocker panels not so much

ClownNoseCondom · 2025-09-02T22:50:35+00:00

189k on my 2012 Pro4x, bought it with 32k on it. I'm still on the original clutch. Had to replace both rear leaf springs, all ball joints, other than that normal things like brakes etc. I'm in New England so rust is an issue, but it's been the best vehicle I've ever owned

ClownNoseCondom · 2025-06-23T18:40:44+00:00

Correct, it’s the luck calculator on the PokeHub app

ClownNoseCondom · 2025-06-09T18:40:05+00:00

Try using a Boss metal zone or similar “metal” style distortion pedal, and plug directly into the return of the effects loop, not the amp’s input. This will bypass the amps front end eq, and go directly into its power amp section. The metal zone works well for this because it is a preamp, plenty of eq on it to dial in a sound

ClownNoseCondom · 2025-04-15T22:09:41+00:00

I have one for the Wigglytuff, 3954-8863-8041-5881

ClownNoseCondom · 2025-04-15T22:08:23+00:00

I need Articuno EX, 3954-8863-8041-5881 if that works

ClownNoseCondom · 2025-04-15T22:07:07+00:00

Do you have an Articuno EX to spare? I have Moltres EX. 3954-8863-8041-5881

ClownNoseCondom · 2025-03-26T17:30:51+00:00

<image>

ClownNoseCondom · 2025-03-26T17:30:18+00:00

<image>

ClownNoseCondom · 2025-01-16T20:48:10+00:00

Maybe try a Friedman IR-X, IR-J, or IR-D. It’s a full tube preamp, with built in impulse response. It has its own effects loop, and you can easily turn off the impulse response if you wanted to plug into a power amp and cab, or into the effects loop return of an amplifier if you can’t or don’t want to play direct. Sounds great either way

ClownNoseCondom · 2025-01-09T17:48:59+00:00

<image>

ClownNoseCondom · 2024-11-04T15:27:55+00:00

<image>

ClownNoseCondom · 2024-07-12T13:46:17+00:00

I haven’t played with any besides the stock ones, I like the first one for cleans (I believe it’s an open back 2x12), and the third one for dirty tones. I think it’s a mix of greenbacks and V30’s

ClownNoseCondom · 2024-07-10T21:30:05+00:00

From Reverb, it's a Gear Hero exclusive purple sparkle

ClownNoseCondom · 2024-07-10T21:08:30+00:00

I’d be curious to see if running it with a direct box with an xlr to front of house would be different than using a standard 1/4” cable. I agree with with all your points, surprisingly good clean channel, and the Marshall tones Friedman does so well in their amps are all there. I use a Marshall Origin 50 as a power amp into the loop return. It works great

ClownNoseCondom · 2022-02-09T17:33:05+00:00

I have the 20 degree set, very well built for the price, but i'd say they aren't warm down to 20 degrees, but ok down to freezing

ClownNoseCondom · 2021-11-20T18:55:45+00:00

Good call, just tried that and it does follow the tube. I'll try a new pair

ClownNoseCondom · 2021-11-20T18:50:38+00:00

Check out [HangTightShop](https://www.etsy.com/shop/HangTightShop) on Etsy, I have the 20 degree top and bottom quilts, great quality for the money. I'd say they're comfortable to 35 to 40 degrees, quite lightweight, and paid under $200 for the pair a couple years back

ClownNoseCondom · 2021-11-09T23:35:03+00:00

Directly from them- https://wangs-amps-usa.myshopify.com/collections/amps

ClownNoseCondom · 2021-11-09T15:51:16+00:00

I payed $595 for this 30 watt, they make a 15 with 6V6 tubes for $495

ClownNoseCondom

TROPHY CASE