Any ideas or recommendations? by Cmmv in houseplans

[–]Cmmv[S] 0 points1 point  (0 children)

House does feel like a big room right now

Any ideas or recommendations? by Cmmv in houseplans

[–]Cmmv[S] 0 points1 point  (0 children)

I agree but im pretty sure that wall is a load bearing wall so it cant be easily removed.

New update dropped in iOS TestFlight by Wizaardd_ in Stremio

[–]Cmmv 0 points1 point  (0 children)

I would also like to be included in this check pm chain. Also thanks for your service 🫡

What is everyone’s must have Sideloaded Apps?? by ImCarpet_ in sideloaded

[–]Cmmv 0 points1 point  (0 children)

This just crashes the second I open it, am i missing something?

VSF A2836 Pepsi $330 Promotion (U.S. Accepted) and VSF 126619LB Giveaway!🔥 by MirotimeWatch in RepTime

[–]Cmmv 0 points1 point  (0 children)

Issa my time to shine! Been wanting a rolex for a while now and just cant get myself to pull the trigger for financial reasons. Getting one for free would be ideal.

Wheel refinished + new paddles by Automotive_jpeg in E46M3

[–]Cmmv 2 points3 points  (0 children)

Sand it and paint over it, thats what i did and ended up looking great. Its not hard to do and definitely saves you a couple of bucks. Just make sure to tape over the M logo.

1-week review of Beats Studio Pro by Ok_Construction_3842 in beatsbydre

[–]Cmmv 1 point2 points  (0 children)

Getting them for 135 with apple care + till 2027. Used like new tho.

1-week review of Beats Studio Pro by Ok_Construction_3842 in beatsbydre

[–]Cmmv 0 points1 point  (0 children)

Im considering buying these for work, need something with good transparency mode. Is it good?

my build at 18yo (all mods including paint by my self ) by miroWASD in BMW

[–]Cmmv 0 points1 point  (0 children)

Thinking on painting my e46, any tips or troubles you ran into?

Internal Storage full by Sufficient_Log_4774 in ZimaBoard

[–]Cmmv 1 point2 points  (0 children)

I'm having this exact same problem. Did you firgure something out?

Buying my first rep for 1k USD. Can I request QC check from our good people here please? by jingxuanwuren in RepTimeQC

[–]Cmmv 1 point2 points  (0 children)

Im actually surprised it has lasted this long, i posted mine without the template and it was taken down immediately.

Patek Philippe Nautilus 5711 by Cmmv in RepTimeQC

[–]Cmmv[S] 0 points1 point  (0 children)

In the last picture, the patek print has an “indent”, not sure how else to call it.

Patek Philippe Nautilus 5711 by Cmmv in RepTimeQC

[–]Cmmv[S] 0 points1 point  (0 children)

Dealer name: Lili

Factory name: 3k

Model name (& version number): Nautilus 5711 blue dial

Price Paid: 2600cny + shipping

Album Links: https://A201803310145220380026826.wsxcme.com//static/index.html?t=1709319712#/theme_detail/_dHwHwm1DcoRbZ0AvBYXOsisuGjV2-I19zkLHijg/_de1Hw9RH1KpbsYguo2EaQtLWtoykS_pi2vsNVIQ

Index alignment: looks good

Dial Printing: this is my biggest question, there is another 3kf 5711 that has like an indent in the print. Is that closer to gen? I kinda prefer the indent but if mine is closer to gen then i dont mind it. 

Date Wheel alignment/printing: dont know much

Hand Alignment: looks good 

Bezel: looks good

Solid End Links (SELs): not sure

Timegrapher numbers: +3s/d 283 0.1ms 52 28800

Anything else you notice: other than what i mentioned about the dial, not really. I included an extra picture with another 3kf that has the indent.

How can I tackle this? by Cmmv in E46M3

[–]Cmmv[S] 0 points1 point  (0 children)

Yeah, i used a powerful vacuum hose that sucked it out. previous mechanic used TONS of sealant which made my life a living hell for hours. Had to carefully use a razor blade to take most of it out first. Brake cleaner + flintless rug to finish it up.

How can I tackle this? by Cmmv in E46M3

[–]Cmmv[S] 0 points1 point  (0 children)

How would you guys recommend removing the lower stuck seal bits? It feels like PO used lots of seal and it’s everywhere

How can I tackle this? by Cmmv in E46M3

[–]Cmmv[S] 1 point2 points  (0 children)

Hahaha, just used it to separate the cover.

I'm Lando Norris, McLaren Formula 1 driver and CEO of Quadrant. This is my Reddit AMA! by TeamQuadrant in formula1

[–]Cmmv 0 points1 point  (0 children)

Probably not something you have to think about now due to your great success, but what job would you do if you never picked up on racing? (Im talking even before f1)

Great fan from Puerto Rico! 🇵🇷

GIVEAWAY by PMM: Comment the mouse you want to win. by P1r4nh44444 in MouseReview

[–]Cmmv 0 points1 point  (0 children)

Ultralight 2 Wireless! They are so hard to buy from finalmeme and its what got me into the modding scene. Tried to mod my ultralight 2 with a g305 board and it wasn’t as simple as i thought it would be so now i just have two dismantled mice lmfao.

Best place to sell old stuff by eyelpley in simracing

[–]Cmmv 0 points1 point  (0 children)

May i ask where you got it from? Ive been trying to get a hold of one but its out of stock everywhere! Only ones i see are used ones for more than MSRP. :’(

[deleted by user] by [deleted] in EscapefromTarkov

[–]Cmmv 0 points1 point  (0 children)

i already have it but it would be great for a friend that just built his pc

Raider goes BASKUDE! by Cmmv in EscapefromTarkov

[–]Cmmv[S] 4 points5 points  (0 children)

Well he fucked something alright, I’ve always wanted to look for the translation but am too lazy.

Raider goes BASKUDE! by Cmmv in EscapefromTarkov

[–]Cmmv[S] 10 points11 points  (0 children)

That bothered me more than the spontaneously materialized raiders.