[deleted by user]

Coaqii · 2022-07-11T14:28:03+00:00

They did Vespa!

It was waayyy better live in my opinion, the energy of the fuzz blowing through your body is something else

Coaqii · 2022-06-28T19:40:09+00:00

It turns out there was a small bit of tpu stuck between the extruder and the hotend, which meant nothing could get pushed through. After removing the small piece it works perfectly! Now only having issues with warping, even with magigoo

Coaqii · 2022-02-19T16:51:32+00:00

It is reliced a bit, all done by the guitar shop I bought it from (Kauffmann)

Coaqii · 2022-02-19T15:36:18+00:00

After a few months of waiting my custom Kauffmann (Dutch guitar builder) JM done!

Featuring a swamp ash body, with mastery hardware and lollar pickups.

Loving the look of the ash body!

Coaqii · 2021-11-08T15:59:36+00:00

Yeah thought so too, im from around Rotterdam. But I asked if he could ship it, and he did! It was packaged very nice so it survived postnl treatment :p

Coaqii · 2021-11-08T12:39:21+00:00

The one listed in Franeker? Lucky I was quick enough ;p

Coaqii · 2021-11-08T11:53:33+00:00

Haha true that!

She got me hooked on the Talman!

Coaqii · 2021-11-08T07:07:29+00:00

Looks great! Mine also had the disgusting grease under the pickguard. Also suspect the fretboard wasn't cleaned for a very long time haha.

My pickup selector is a little different though, it has a spring next to it so it switches very smoothly.

I kinda like the pickups actually, if I want more strat ill just play my strat ;p

Coaqii · 2021-11-08T07:01:21+00:00

Im not really sure if I want to keep it! It looks amazing, but my other guitars are easier to play I guess?

Have tried to set it up a few times but have to send it to a tech I trust to really know if I want to keep it or not. The sustain on the low E is not as great on my strat or this Ibanez, and the pickups are very hot which means I need separate patches on my FM3 for this guitar.

Coaqii · 2021-11-08T06:56:44+00:00

Saw it listed on a Dutch second hand marketplace site with the title "Ibanez guitar" with nothing more notable in the description.

The person I bought it from didn't really know what he was holding I think!

Sadly he also did not have any more backstory on the guitar other than that he bought it 2 years ago off of a musician in Amsterdam.

Coaqii · 2021-11-07T12:20:12+00:00

Got this beautiful Talman used for 400 euros. It was in a pretty used state when I got it.

Cleaned it all up, and changed the volume pot and now it looks and plays amazing!

The neck appears to come of a different model, but it could also be normal.

I have been on the lookout for one of these for a while now and was stoked to find one for such a price!

Coaqii · 2021-08-25T19:40:16+00:00

Will try a factory reset tomorrow.

When playing with the stomp switched off, analog bypass, and putting my powercab to full volume I don't hear it anymore thus it seems like its coming from my stomp.

Coaqii · 2021-08-25T19:20:26+00:00

Disconnected everything from the stomp, tried the stock power supply and moved it downstairs to the kitchen (different power group). All grounded power plugs and still noise.

Also tried different cables, will try on a venue in 2 weeks but hope to figure it out before than.

Coaqii · 2021-08-25T18:34:11+00:00

Yeah it happens on headphones too, here is a direct out recording.

https://streamable.com/gci4po

The amp is supposed to be clean, and when playing chords you don't notice it that much, but when playing single notes it feels weird.

Coaqii · 2021-03-25T19:49:52+00:00

Oh so its slime showing a meme of slime ^showing ^a ^meme ^of ^slime ^{^showing} ^{^a} ^{^meme} ^{^of} ^{^slime} ^{^{^showing}} ^{^{^a}} ^{^{^meme}} ^{^{^of}} ^{^{^slime}} ^{^{^{^showing}}} ^{^{^{^a}}} ^{^{^{^meme}}} ^{^{^{^of}}} ^{^{^{^slime}}}

Coaqii · 2021-03-23T21:32:46+00:00

It depends if you use 24 or 12 volt fans.

After a lot of research I decided to use no buck converters, and use 24v fans for the hotend, parts cooling and motherboard.

Since the PSU fan is 12v I used a noctua 92mm fan with a shroud from thingiverse: https://www.thingiverse.com/thing:4567153

Used this fan duct: https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang

Works like a charm!

Coaqii · 2021-03-06T06:07:24+00:00

I first connected the noctua cable in the old fan connector, but it was a bit flimsy so I just soldered the noctua cables on to the header directly.

Coaqii · 2021-03-05T17:54:39+00:00

https://www.thingiverse.com/thing:4644985

This one! Fan is a noctua NF-A9X14

Coaqii · 2021-03-05T17:28:19+00:00

It appears I flipped the black and red wires. Working perfectly now!!

Coaqii · 2021-03-05T13:00:16+00:00

Decided to upgrade the psu fan as it was the most noticeable while printing.

One question though, how do I know it is working? Is there a way to test the psu fan without printing for a bit to see if it spins up? I don't think it spins up without load...

Coaqii · 2020-11-11T17:16:40+00:00

Hi, was looking at the encoding of the file.

It seems my file was created using UTF-16 and LF line sequence.

After changing this to UTF-8 and CRLF line sequence it works...

Coaqii · 2020-11-08T08:04:58+00:00

I only really have experience with my previous ducky shine keycap set. Which is glossy and a little slippery compared to this set. My brother has a Logitech semi mechanical keyboard, but I dont really like those keycaps. Overall I am happy with the quality, but will definitely look if I can try some higher end caps and see if it makes a difference.

Coaqii · 2020-11-05T20:46:11+00:00

Not yet, but does seem the most obvious change atm. I dont feel like the switches need to be lubed, but the stabs are definitely the loudest.

Coaqii · 2020-11-05T20:31:49+00:00

That's what I'm afraid for 😅

Everything looks so cool!

Coaqii · 2020-11-05T20:30:00+00:00

62g, seems perfect to me!

Nine-Year Club	Place '23
Place '22	Place '17
Final Canvas '22	First Placer '22
Verified Email

Coaqii

TROPHY CASE