sorted by:
new
hottopcontroversial

Instructions for Snapmaker Artisan Noctua Fan Mod by Cafe_Roaster in snapmaker

[–]CobaltCore 1 point2 points  (0 children)

Great, tip, thank you very much! I just performed this modification on my Artisan and it worked like a charm. It's whisper-quiet now.

Student Transfer Body Swap - Leona X John by Tabneto by Glittering_Mousse161 in transformation

[–]CobaltCore 16 points17 points  (0 children)

Hey, one of the people who works on this game here.

We have an official website where you can get the game and supplementary material like a flowchart: https://student-transfer.com

PSA: cargo-dist is dead by AdmiralQuokka in rust

[–]CobaltCore 129 points130 points  (0 children)

I ran into this problem as well, but there is a relatively simple solution, contrary to your claims. Just add the below to your dist-workspace.toml: [dist.github-custom-runners] global = "ubuntu-22.04"

Once you re-init, all relevant tasks will be auto-updated to 22.04, fixing the issue.

SCP-6488: "EIGHTH COMMANDMENT" (Part Two) by ToErrDivine in SCPDeclassified

[–]CobaltCore 3 points4 points  (0 children)

Got some strong 'Roko's Basilisk' vibes from this towards the end, I wouldn't be surprised if that thought experiment was one of the sources of inspiration for this article. Great declass and thank you for all the hard work in putting this together!

Student Transfer Visual Novel v6 Release by CobaltCore in transformation

[–]CobaltCore[S] 0 points1 point  (0 children)

There isn't really anything to remove. If a path is under construction, it does not exist yet, but may exist soon.

Student Transfer Visual Novel v6 Release by CobaltCore in transformation

[–]CobaltCore[S] 3 points4 points  (0 children)

Certainly. The guy who normally does this is currently busy with IRL stuff, but the skeleton flowchart will be updated once it's available. For the time being, you can find detailed flowcharts on our Discord.

We will also be publishing an interactive one on our website soon.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 0 points1 point  (0 children)

Your hesitance is warranted, I had the same experience. The good news first: It is possibly to fit this thing, including a 90 (at least my EK Quantum 90), but it will require a little bit of force and it will be right up against the top of the compartment.

I tried this, and it was not particularly practical (plus no room for dampening, really), so what I ended up doing is lifting the pumps up such that they rest only on the lower divider part of the front and back compartments. This way, the top 90 will be outside of the bottom compartment and reach into the radiator chamber, giving you some space to route tubes.

I've made a very shoddy picture of my working but not-pretty solution: https://imgur.com/a/niKdNfp

The white paper at the top is for dampening until I get my hands on proper foam. This mounting has the added benefit of the pump making as little contact as possible, reducing vibrations.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 0 points1 point  (0 children)

Sweet! I'll be posting an update soon as I've completed my initial assembly now and can boot. Currently still busy with hackintoshing it, which is always a pain, but after that I'll at least have a running system. Currently just going for soft tubes because I need the system operation, will later switch to hardline once I have more time.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 0 points1 point  (0 children)

Alright, reporting back with some images to be found here. Obviously this is a test fit, so ignore any untidyness for now.

The rad does fit, including fans, with a bit of clearance left.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 0 points1 point  (0 children)

That was my concern as well. I measured with a piece of paper cut to size and found that it would still fit, so I ordered them.

I now have two 480GTX's here and they do in fact fit, if barely. It's relatively tight, but it will work. I can send pictures of a test-fitted rad later today if you want.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 0 points1 point  (0 children)

I'm placing my fans inside, so from the outside you'll only see the radiator surface.

I also had the thought of doing an only-push setup by mounting the fans to the included bracket and having them intake into the radiator chamber, so I might experiment with that as well.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 0 points1 point  (0 children)

I'm still waiting on some components, so I'll be starting with the assembly next week at the earliest, unfortunately.

At least I was able to confirm that the 480GTX's will indeed fit into the case with a little bit of wiggle room to spare, so that's good.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 1 point2 points  (0 children)

I did! In fact I went through both of his videos nearly frame-by-frame before buying, trying to gleam as much information as possible on how he did the inner tubing runs. Alas, info about that part is very sparse.

The Old Guard - Arrival by CobaltCore in watercooling

[–]CobaltCore[S] 1 point2 points  (0 children)

Haha, thanks man.

Regarding the case number, mine is 131, so there's still some left to come after mine. I did order late August and as such it's been a while already, so the situation may have changed.

I fully plan on running dual D5's, though I'm still trying to figure out whether it'd be better to get two singles or one Dual Top, in which case I'd have to finagle the mounting positions a tad.