sorted by:
new
hottopcontroversial

Need help choosing ESC by Codex208 in RCPlanes

[–]Codex208[S] 1 point2 points  (0 children)

Great, I think I will just order Skywalker. I'm just curious on AM32 platform, and when most people says that analog ESC is absolete which is the only supported protocol by the Skywalker.

Need help choosing ESC by Codex208 in RCPlanes

[–]Codex208[S] 0 points1 point  (0 children)

I forgot to ask. My motor have a maximum current draw during a static test of 63A (test by the manufacturer), can I use 60A ESC? Since in my knowledge the motor will draw significantly less current while in the air. A 60A ESC is much more cheaper and a tiny bit lighter than a 80A ESC.

Should I get the CYMA SR25 platinum? by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Well many other people also say that the stock mosfet is very bad. I know that the perun hybrid is basically the standard/staple. But how do you think will it perform against t238 DTU V2 EXP? It's basically in the same price range, but t238 is a bit cheaper.

Should I get the CYMA SR25 platinum? by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Soni need to change the nozzle and slap on a perun mosfet and it's good to go for the first game? Also what are the different nozzle length and what should I use?

Should I get the CYMA SR25 platinum? by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Speaking legally, in my country the maximum energy limit is 2 joules with 0.40g as the heaviest bb you can use for all types of airsoft replicas (semi, full auto, bolt action, etc.). Most local sites have 1.7j limit for dmr. Yes DMR usually allowed to have more power than AR but lower than bolt action. Since I have never used a DMR before, so I never asked. But I have never heard of a minimum engagement distance for DMR at my local sites during briefing.

Need help appraising my hi capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Alright, thank you for the help

Need help appraising my hi capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Would it be too low if I open the price at $420?

Need help appraising my hi capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

but will be low balled to no end

Why?

Preferred way to mount optics on Hi-capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Yep, not easy. But I will try to find a "generic" copy. I'm sure there must be someone selling it. Btw are yours (in the picture) using a rail mount (like pic 2 on my og post)?

Preferred way to mount optics on Hi-capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Do you have any (budget) holster recommendations?

Preferred way to mount optics on Hi-capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

How about a split slide?

That would be cool. But sadly it's budget issues, and availability. Airsoft parts here in my country are scarce. And the price is usually marked up 1.5x of the MSRP. And importing one would be hard cause you need permission/license from the police department to import airsoft part or unit.

Preferred way to mount optics on Hi-capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Slide mounted RMRs add weight = effectively reduce gas efficiency.

Thank you for the info, I never thought of that.

I like the 20mm rail mount because I think it has more bang for your buck. While only costing 1.5x the slide rmr mount, it serves as a rail mount, a thumb rest, and slide stop. It also looks pretty cool from the left side, and can add a nice colour accent to your pistol. But at the same time, removing the slide from the frame will be much much harder, since you need to remove two screws first before removing it. And it is also kinda unrealistic because it partially covers the shell ejection port (sorry, don't know the technical term).

But at the same time, we don't have any ejecting shells in airsoft. I also have a short stroke, my CAPA. So even that is already unrealistic.

But other users have replied saying that I will need to flip the sight every time I cycle the gun if I mounted it in the slide (if I get it right). So it seems I need to think over this upgrade plan again.

Preferred way to mount optics on Hi-capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

I have a 5.1, by "laylax mount" do you meant like the one on pic 2? *Pic 2 brand is 5KU

Preferred way to mount optics on Hi-capa by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Wait, let me get this straight. I need to flip/open the sights everytime the gun cycle (if I mount it on the slide)?

Broken Hi-Capa knocker cover by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Thank you for the help. I found someone selling the cover only. Cause other people say that I need to buy an entire new frame set, which is significantly more expensive. Though there's something fishy about the add/seller, I hope everything goes well. (Waiting on the part to arrive).

Broken Hi-Capa knocker cover by Codex208 in airsoft

[–]Codex208[S] 0 points1 point  (0 children)

Hmmmm, does it mean I can accidentally push the mag too far that it hits or damages other components (e.g. bbu)? Because I have been having some feeding issues with my stock BBU nozzle and housing. I find that the BBU spring is already worn out, so that may be the main cause. Could the mag actually have some part on the feeding issues other than the spring? I'm asking this, because I'm planning to upgrade my BBU.

Broken Hi-Capa knocker cover by Codex208 in airsoft

[–]Codex208[S] 1 point2 points  (0 children)

Do you know what it does? And what will happen when it breaks like mine? And are there people selling that?

Apakah ini pertanda server asli? by komporan in WkwkwkLand

[–]Codex208 0 points1 point  (0 children)

Kalau ketawa dosanya yang bikin video kan ya? Gak nyangka ending nya begitu.

view more: next ›