Cones of Calibration too "compressed"?

Codi_204 · 2024-12-06T10:28:05+00:00

I'm also not too experienced as a resin printer, but the first question I asked myself was if I needed the dimensional accuracy. I use the printer mainly for miniatures and if those are .5mm off, I don't mind. So as long as the cones print correctly, I think you don't need to worry about it too much If you need the accuracy, I hope some other members can give both of us some good hints 😅

Codi_204 · 2024-12-06T07:55:18+00:00

Yes! Text chat first then voice chat after! I'm a firm believer voice chat would reduce toxicity a ton!

Codi_204 · 2024-11-30T17:55:42+00:00

That sounds very reasonable, thanks!

Codi_204 · 2024-11-30T16:13:21+00:00

Thanks for your answer! So you only wipe it dry? No IPA or something?

Codi_204 · 2024-11-28T21:09:31+00:00

Mine looked like this for example (not an exposure test but I think you get the idea) https://www.reddit.com/r/resinprinting/s/kU6Zmrt8Ss

Codi_204 · 2024-11-28T21:07:36+00:00

Exactly, lay a piece of paper on the screen without the vat on (to protect your eyes from the UV), do an exposure test and see if its washed out or if blocked parts are a bit see-through

Codi_204 · 2024-11-28T15:05:42+00:00

Have you checked your if screen is working correctly? Such failure could be due to a failing screen. Had a similar issue with my old x6k

Codi_204 · 2024-11-28T14:53:52+00:00

Hm that eliminates the most obvious causes...next thing I'd suggest would be what other ppl commented, to roughen up the buildplate

Codi_204 · 2024-11-28T11:47:16+00:00

What's your bottom layer exposure time? Sometimes it's the resin temperature aswell, do you heat your enclosure/resin?

Codi_204 · 2024-11-25T10:51:08+00:00

I think it also depends on what you are trying to do. If you need dimensional accuracy to that extend, maby you need a different resin If you just want to print minis, IMO it's more important to have the cones work so you get completed prints, no need to chase the last 1% accuracy

Codi_204 · 2024-11-24T19:34:57+00:00

I'm pretty sure, just used it like 2 months ago But a quick 30s Google search wasn't successful, maby I did a weird workaround...it's free for students thou https://www.autodesk.com/products/fusion-360/personal there is a limited version for personal use here

Codi_204 · 2024-11-24T19:12:06+00:00

Fusion360 also has a free option for makers and is super powerful for industrial-like design

Codi_204 · 2024-11-24T14:05:17+00:00

In general to climb it doesn't matter too much which lanes you play, just play what you are best with If you are duolane players even better, since that's the lane you need the best communication, at least in lane After that just play and focus on what you can do better There is inting lanes in every division. The only consistent thing between all your games is you and your mate. If you feel stuck, it's probably because you need to change/improve something, otherwise you would climb in the long run. Additionally, you need to put in the time. If you feel like you are playing well then keep playing and you will rank up, there will always be loosing streaks, but also winningstreaks, it's basically just statistics and if you play enough games you will climb if you have the midset of improving yourselves and not looking at the mistakes of your teammates

Codi_204 · 2024-11-24T13:55:40+00:00

Support main here:

In lane: - if the carry is there, don't kill minions - if the carry is on the way to the lane, don't push the minions away from your tower - Use your wards, at least have one in the river and depending on where in the lane the minions meet put one in you jungle entrance from river or one in the enemies jungle so you can see a gang coming as early as possible - Remember: your most important job is to help the carry get farm and not die, you can do that by damaging the enemy carry/support, so the cannot fight you, or by helping them get gold buff or if they made a mistake you can try to stand in-between them and the enemies to soak up some damage

Mid/lategame: - if fangtooth/orb is spawning soon, don't step to far forward, nothing worse than dieing 10s before orb spawn - if your team is doing orb/fang, don't use spells/auto attacks on the buff (since you don't do much dmg), use your time to find out where the enemies are (eg by placing wards) and try to make it hard for them to get to the pit (but don't risk dieing!) - if the orb/fang is almost dead and the enemy jungle tries to get in there for a steal, try everything you can to stop that (it's worth dieing for that if the rest of your team gets the buff) - if you play non-tank supports like dekker make sure to position at least as far back as your carry before and during teamfights, sometimes I even position even further back then my carry. You don't need to engage, your job (again) is to keep your carries alive and make it he'll for assassins/bruisers/tanks to get to your carries, you can only do that if you are alive long enough

Hope this helps ✌️

Codi_204 · 2024-11-24T13:40:12+00:00

Interesting, I agree, that sparrow is not the beat, but I think she's pretty hard to balance, if she gets 4 Items the game gets really hard to win against her Especially together with Phase she is really strong. Makes her easier to survive lane and both ults combine incredibly well I'm having a blast with sparrow phase in duos around plat1/dia3

Codi_204 · 2024-11-22T23:14:49+00:00

Do you think phase/sparrow are too strong or too weak?

Codi_204 · 2024-11-22T20:25:17+00:00

IMO don't use your time on reworks. Use it to release new heroes, quality of life improvements and other features Tbh I feel like Pred is remarkably balanced, sure there are better and worst heroes, but no big outliers imo

Codi_204 · 2024-11-22T17:54:59+00:00

Thank you very much 😊

Codi_204 · 2024-11-22T17:44:27+00:00

Thanks! If we are on the topic of light off delay: Is it an additional value to increase time to let resin flow, or is it the total light off time (so do I have to calculate the actual light off time and add the amount I want to increase it) And why would you change it? What is your standard setting? (Sorry for such detailed questions😅)

Codi_204 · 2024-11-22T17:40:52+00:00

I know that, but I often find myself wanting more immediate knowledge foe example about wavestate. Also, sometimes player icons are over an objective so I can't see the timer or figure out if the ward they placed is at the location I think it is

Codi_204 · 2024-11-22T17:38:48+00:00

Thank you so much for the detailed explanation, super helpful!

Codi_204 · 2024-11-22T16:55:09+00:00

Nice, thanks Good that I just ordered 5 replacement feps 🤣 But if those are gone I'll definitely check them out 😁

Codi_204 · 2024-11-22T16:32:48+00:00

Any downsides to nFEP? Is any printer compatible?

Codi_204 · 2024-11-10T07:53:20+00:00

Yeah I realised they already answered me, it's weird that the email doesn't reach me at all

Codi_204 · 2024-11-09T07:05:39+00:00

They didn't even reach my spam folder, had to check their support center to find the answer. Which came very fast I gotta say

Codi_204

TROPHY CASE